Pabrik membosankan meja

Fermat WFT 13 R CNC

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 250 mm, berat benda kerja (maks.): 750 kg, panjang penggilingan: 2.000 mm, diameter roda gerinda: 500 mm, lebar total: 2.000 mm, panjang total: 6.000 mm, tinggi total: 2.000 mm, diameter penggilingan: 320.400.500 mm, jarak gerak quill: 50 mm, berat benda kerja di antara senter: 500 g, jarak antara pusat: 2.200 mm, diameter benda kerja antara pusat: 500 mm, kecepatan spindel (maks.): 560 rpm, kecepatan spindel (min.): 1 rpm, panjang umpan sumbu Z: 2.500 mm, kecepatan spindle penggilingan: 1.400 rpm, berat keseluruhan: 8.000 kg, masa garansi: 24 bulan, kecepatan maksimum spindel benda kerja: 560 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Technical Main Data: Swing Diameter: mm: 320, 400, 500 Between Centers Distance: mm: 1000, 1500, 2000, 3000 Maximum Workpiece Weight Mounted Between Centers: kg: 500 Maximum Workpiece Weight for Chucking (incl. Standard Grinding Wheel): mm: 500 (600mm option) Peripheral Speed: m/sec: 45 Taper of Workpiece Spindle (in Tailstock Quill): Morse: 5 Infinitely Variable Workpiece Spindle Speed: rpm: 1-560 Minimum Programmable Increment: - on X-axis (related to diameter): mm 0.001 - on Z-axis: mm 0.005 Table Swiveling Range: °: +6 / -4 Grinding Head Swiveling Range: °: ±30 Workpiece Headstock Swiveling Range: °: 90 Grinding Spindle Motor: kW: 11 Knsdpfxepy A Ius Aahef Workpiece Headstock Motor: kW: 2.5 Total Motor Power: kW: 15 Pneumatic Equipment Pressure: kPa: 0.6 Machine Weight: kg: approx. 8,000

Kondisi: bekas, en-GB-001 Knedpfx Aepgkwgjahjf

Kondisi: baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, In good technical condition. Year of modernization: 2005. Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7,800 x 7,200 mm Maximum machine height: 4,900 mm Occupied floor space: 50 square meters Required installation height: 5,800 mm Ksdowc Sm Iopfx Aahenf Maximum workpiece weight: 12,000 kg Work spindle diameter: 130 mm Spindle taper: ISO 50 Quill travel of the work spindle: 800 mm Spindle speed range: 5 to 1,800 rpm Distance from spindle axis to table clamping surface (Y): 70 mm Table clamping surface: 2,500 x 1,800 mm

Kondisi: baik (bekas),

Kondisi: baru, Tahun pembuatan: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Kjdpfx Aed I A Dhoahenf Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse Taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Kondisi: baik (bekas), Tahun pembuatan: 2002, de Knedpfx Aetwpameahof

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Knodpfsxddvnex Aahjf Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK Knsdpfxsd Ev Upo Aahof The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: bekas, Tahun pembuatan: 2005, ms-7677 Knjdpfx Aaexcbiishof

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, panjang total: 2.210 mm, lebar total: 1.530 mm, tinggi total: 1.940 mm, berat keseluruhan: 1.200 kg, tegangan masuk: 400 V, tinggi benda kerja (maks.): 50 mm, daya: 6 kW (8,16 hp), arus masuk: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges from both the outer and inner contours of stainless steel, steel, or aluminum parts that have been cut on a laser, shear, or punching machine. This machine processes parts of various dimensions, including products from a size of 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, leaving clean, smooth, and burr-free edges on all parts. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Current consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200 Knedpfx Aastzfntjhsf