Mesin penghilang gerinda pelat logam

NS Maquinas DM 1100 2C - NEUMASCHINE

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. Bsdpfxod Ixado Ad Relf A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 48.274 h, gaya penekanan: 326 t, jumlah sumbu: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, an electrohydraulic top drive, and a 2D graphical control DA 69 on a 10.4" color screen. The machine is equipped with a 6-axis CNC backgauge, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced under a TRUMPF maintenance contract. Please contact us for more information about this machine. • Clear column spacing: 3680 mm • Installation height: 535 mm • Control unit: 2D graphical control DA 69 on window with 10.4" color display • Electrical equipment: for 3-phase 400V / 50Hz • The machine has been serviced annually • Maintenance contract available • Rigid machine frame, fully welded steel construction • Press beam with high flexural strength • High-dynamic electromechanical direct drive (torque motor) • Electrohydraulic top drive via proportional valves • Modern block hydraulic system • Inductive length measurement system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper Modufix tool clamping system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numeric workshop programming • Integrated Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-capable, teleservice via modem • Electrical cabinet air conditioning • Side-mounted safety doors and rear safety guard Bledpfjx D D Hyex Ad Ref • Two-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomic package: comfortable front work area and footrest • 2 storage consoles and 2 document trays • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tooling maintained, all within tolerance Additional Equipment: • Backgauge system with 5 axes and electrical cabinet air conditioning • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support arms • 1x bending aid with 900 mm parking position • Table extension for base table / auxiliary table Technical Specification: Bending length: 1020 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, lebar kerja: 1.100 mm, berat keseluruhan: 1.300 kg, lebar benda kerja (maks.): 600 mm, sambungan udara terkompresi: 6 batang, ketebalan lembaran (maks.): 40 mm, jumlah pemilik sebelumnya: 1, jenis penyesuaian ketinggian: listrik, panjang meja: 3.000 mm, tinggi meja: 850 mm, lebar meja: 600 mm, masa garansi: 3 bulan, Translation into English: Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units: mm, bar Operating manual: 1x manual Paint finish: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Blodpfxow U A Dmo Ad Rof Planetary head version with 6 tools each, drive 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high-wear resistant version) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Stepless feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with starting switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt, drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit lock, belts replaced – Machine is fully operational and in very good technical condition. Set according to manufacturer's specifications/standards. Delivery includes a mechanical functional warranty of 3 months from delivery date.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Blsdpfxswh U D Hs Ad Rof Spindle speed: 5,000 rpm 2 x 12-position turrets with driven tools Turret 1 with Y-axis Parts catcher Belt filter system Chip conveyor IRCO Profimat bar loader

Kondisi: baru, Tahun pembuatan: 2025, diameter rol: 140 mm, panjang rol: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical rolling - Brake motor Bsdpfx Adegg Nv Ij Relf - Emergency stop - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up Bledpfx Adjk Dpp Se Rsf - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Kondisi: baru, Tahun pembuatan: 2024, SINGLE-BLADE EDGING SAW usable cutting length from 4.2 to 8.2 m maximum cutting thickness 160 mm parallel guide sawdust hopper Bljdpfofw Nv Rox Ad Ref

Kondisi: baru, Tahun pembuatan: 2024, Tunneltyp-Teilereinigungsanlage für Metall- und Kunststoffteile. Einsatz in diversen Branchen wie Automobilindustrie, Lebensmittelindustrie, Metallbearbeitung, Blechverarbeitung, Kunststoffbehälter usw. Funktionsprinzip Das Werkstück gelangt über ein Bandförderer-System in den Reinigungstunnel; durch gezielt platzierte Düsen werden sämtliche Bereiche des Werkstücks gereinigt. Während das Werkstück den Tunnel durchläuft, wird es kontinuierlich mit einem Gemisch aus erhitztem Wasser und Reinigungschemikalien unter Druck gewaschen. Dabei werden sämtliche Öle, Späne und sonstige industrielle Verunreinigungen von der Oberfläche entfernt. Tunnelwaschanlagen werden sowohl standardisiert als auch individuell anwendungsspezifisch von der INTERSONIK-Ingenieurabteilung konzipiert. Bedpfed I Azvox Ad Relf Ablauf des Reinigungsprozesses Waschen, Passivieren und Trocknen werden von den Intersonik-Prozessingenieuren exakt entsprechend der gewünschten Ergebnisse mit umweltfreundlichen Intersonik-Chemikalien entwickelt. Betriebsablauf ► Vorwäsche ► Hauptwäsche ► Spülung ► Passivierung ► Trocknung Anwendungsbereiche ► Automobilindustrie ► Wehrtechnik ► Lebensmittelindustrie ► Für alle Fertigungsindustrien bei Serienfertigung und Wartungszwecken ► Metallmöbelindustrie Das Förderbandsystem wird von INTERSONIK speziell nach Ihren Anforderungen und Werkstücken konstruiert und gefertigt. Förderbandgeschwindigkeit ist einstellbar. Automatisches Flüssigkeitsnachfüllen ist Standard. Elektrische Beheizung ist Standard, Wärmetauscher- und Brennerbeheizung sind optional. Alle Betriebsdaten können über Digitalanzeigen eingesehen und gesteuert werden. SPS-Steuerung ist optional verfügbar. Alle Flüssigkeitstanks sind wärmeisoliert. Absaug- und Nebelabscheideeinheit sind standardmäßig integriert. Für weitere Optionen und Details stehen wir Ihnen gern zur Verfügung. Tunnelwäsche, automatische Teilewaschanlage, Kfz-Teilereinigung, Metallreinigung, Teilereiniger, Entfettung, Spritzreinigung, Druckwaschmaschine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Maier ML 26 E CNC Lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Travel speed: 32 m/min Control system: Maier Pro GE-Fanuc Guide bushing: 451.001 Main Spindle Passage: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Spindle stroke: 220 mm Main spindle, speed: 0 – 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet: 161E Sub Spindle Passage: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. Travel (Z): 220 mm Sub spindle, speed: 0 – 6000 rpm Main spindle, power: 1.1 kW Collet: 161E Cross Machining Basic holders for bar stock 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of driven tools: 0.5 kW Backworking Drive power: 0.5 kW Number of tools: 4 of which driven: 4 Collets: ER16 Tool Turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF DELIVERY Blsdpfx Adju S Rivs Rsf Includes (not an exhaustive list): Maier ML 26 E CNC Lathe Oil mist separator Transformer Chip conveyor High-pressure pump / belt filter system Fire suppression system LNS bar feeder Complete operating documentation Exact scope of delivery according to photo documentation. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 250 t, berat keseluruhan: 22.800 kg, CNC press brake Manufacturer: Weinbrenner Blsdor Sxq Rspfx Ad Rjf Model: GP250 Machine specifications: - Crowning system - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available.