Pemotong kayu Mario Ferrari L4T2N

Ferrari L4T2N

Tahun pembuatan: 2025, Kondisi: baru, Multifunctional screening plant SBS 1520 F3 – a product of over 30 years of experience with more than 650 units sold. Ideal for screening sand, producing cable sand, compost screening, construction debris screening, recycling material screening, topsoil screening, excavated material screening, wood chips screening, gravel screening, coal screening, scrap screening, slag screening, humus screening, asphalt screening, and milling material screening. Standard configuration – per the following technical description: - 1 screen box with feed hopper and 2 screen decks - Screen panels fitted according to your requirements - 1 eccentric weight motor - 1 rubber screen brake - 1 side discharge conveyor - Machine frame (box design) - Includes forklift pockets and crane lugs - 1 extension chute on the feed hopper to increase screening area ----- - 8 steel springs for optimal material separation and screening intensity ----- - 1 control cabinet with residual-current device, emergency stop button, and phase inverter for changing screening direction Technical data: - 2-deck screen plant Ndedpfx Aegmibvsahjf - Top deck: 2000 x 1500 mm - Bottom deck: 2000 x 1500 mm - 3-fraction separation - Weight: 1500 kg - Drive: 400 V / 1.1 kW / (16 A) Transport dimensions: - Width: 1550 mm / with conveyor: 2000 mm - Length: 2850 mm - Height: 2680 mm Conveyor belt: - 0.75 kW - Length: 2900 mm - Width: 300 mm You are welcome to visit and test the screening plant at our storage facility in Rodgau Weiskirchen.

Kondisi: bekas, Tahun pembuatan: 1985, Edge thickness 0.4 - 12 mm Workpiece thickness 10 - 55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Feed rate 13 m/min Pneumatic connection 7 bar Total length 5220 mm Weight 1950 kg Heated glue pot with Quickmelt hot-melt adhesive granulate Glue roller rotation for synchronous and counter rotation Edge magazine for PVC roll goods and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at the machine infeed All units are track-controlled – i.e., no workpiece-controlled limit switches required End trimming Milling combination: bevel milling/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with error indication Infrared heating element CE compliant Note regarding used machines: Ndjdpfx Aaoc Tmygjhof • Technical data subject to change and prior sale. • Prices stated are ex works – loading included! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty or guarantee claims. Buyers are welcome to inspect machines at their current location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 14.900 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 33.000 kg, daya: 264 kW (358,94 hp), kecepatan rotasi (min.): 70 rpm, tegangan masuk: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, either loose or pressed in bales. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: as per customer request, mm Control cabinet: complete with (ABB frequency converter) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 87 rpm (at 50 Hz) Number of rotor blades: 84 pieces Blade dimensions: 172 x 57 x 28 mm Counter blades (lower): 6 pieces Scraper comb (upper): 6 pieces Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions (LxWxH): 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge conveyors available as options. Ndedpfxov S Hyvj Aahjf

Kondisi: sangat baik (bekas), Nomor katalog 6726 DATA TEKNIS - Inlet corong pengisian: 280x300 mm - Outlet kayu hasil pencacahan: Ø 310 mm - Lebar kerja rotor: 340 mm - Motor utama: 22 kW - Jumlah pisau: 6 buah - Dimensi (P/L/T): 1300x1150x1680 mm - Berat: 720 kg KEUNGGULAN – Kondisi sangat baik – Mesin pencacah bekas Harga netto: 19.900 PLN Harga netto: 4.740 EUR Harga netto dihitung menurut kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang signifikan harga dapat berubah) Nsdpsignt Uofx Aahsdf

Kondisi: diremajakan ulang (bekas), Complete set of debarking knives for Valonkone VK26M Ndsdpfx Aoq A Ic Asahef consisting of: 4 pre-cutters 4 main cutters *incl. metal box

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversized roller bearings Bearing housing: steel, flange housing Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE Ndedpfx Aoncd Azjahsf

Kondisi: baru, Tahun pembuatan: 2025, The SQUALO 515 single-shaft multi-blade or multi-rip circular saw, in the LM version, is distinguished by its advanced mobile blade system. The machine is equipped with motorized feed rollers on the worktable and top motorized pressure rollers, ensuring effective all-wheel drive for precise and consistent material transport. In the LM (Mobile Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three mobile blades. These mobile blades can be dynamically positioned to accommodate various trimming and multiple cutting requirements. A distinctive feature of this model is the possibility to expand its cutting capacity: by using special spacers, the number of blades used simultaneously can be increased up to six. It is important to note that the blades mounted on these special spacers operate at a predetermined fixed distance, allowing for the efficient production of components with standardized widths. This versatility enables the machine to seamlessly switch from operations requiring flexible blade positioning to serial production with fixed cutting intervals. Ndodpfjhpbxisx Aahef

Kondisi: baik (bekas), ORMA LCC44/14 continuous press line with infeed conveyor and outfeed conveyor OSAMA glue spreader, type S4R/P-1400, 4 rollers Ndodovtx Hkjpfx Aahsf

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Wood chipper for sawmill offcuts LINDNER type T 400/140-2 – After technical inspection – Very good condition – Suitable for producing industrial wood chips TECHNICAL SPECIFICATIONS: Feed opening width: 400 mm Feed opening height: 140 mm Rotor diameter: 450 mm Rotor length: 400 mm Main motor power: 33 kW Feed motors power: 2 x 1.5 kW Number of knives: 2 pcs Screen mesh size: 60 mm x 90 mm Feed rollers in very good condition Feeder drive motor power: 1.5 kW Feeder length: 4,200 mm Ndedpfx Aaor Ak Rgehjf Transport dimensions (L/W/H): 430 / 240 / 150 cm Weight: approx. 2,000 kg

Kondisi: baru, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use. Thanks to its high-quality construction and powerful drive, even heavily branched material is no problem! It effortlessly processes logs with diameters up to 16 cm. Powered by a robust 35 HP Rato petrol engine, it is also equipped with a no-stress automatic feed system, which prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system to meet your requirements. Thanks to its road approval, the chipper can be transported anywhere. Features: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Delivery possible throughout Europe. Nedpfx Ajmfnz Eoahedf -- Trailer chipper, wood chipper, wood shredding machine, branch chipper, professional chipper, wood shredding machine