Mesin bubut paralel 330 x 2000 mm P.B.105

Fervi T094F20

Kondisi: siap digunakan (bekas), The machine has been overhauled and is fully operational, complete with documentation. Hjdpfx Asfw Az Uoanonl

Tahun pembuatan: 2024, Kondisi: baru, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide range of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the shortest possible delivery times. Hnedev Rpn Tjpfx Aanol We warmly invite you to cooperate with us!

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 4.428 h, de-maschine-003 Hedpfx Aswnidhoanenl

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm Hjdpfx Aaeyhhuwjnenl SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Kondisi: baru, Tahun pembuatan: 2026, The ZX7045 B1 DRO milling-drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for screws up to M12 mm. With a milling capacity of up to 80 mm (width) and keyway cutting up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features an automatic spindle feed, increasing work efficiency. Additionally, it is equipped with a digital readout for enhanced precision and a coolant system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals who demand high quality and performance in metalworking. Product Features: - HEAVY-DUTY, STABLE CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION Hnsdpfx Aajud H H Uonsl - ROTARY HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Base available as an optional accessory TECHNICAL DATA: - DRILLING CAPACITY IN STEEL: 32 mm - DRILLING CAPACITY IN CAST IRON: 45 mm - FACE MILLING CUTTER DIAMETER: 80 mm - END MILL DIAMETER: 28 mm - SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) - SPINDLE TAPER: MT 4 - SPINDLE STROKE (AUTOMATIC FEED): 125 mm - WORK TABLE DIMENSIONS: 820 mm x 240 mm - BASE DIMENSIONS: 580 x 600 mm - MAX. DISTANCE SPINDLE TO TABLE: 445 mm - DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm - TRAVEL X/Y/Z: 515/175/430 mm - QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev - HEAD ROTATION LEFT/RIGHT: 90° - MOTOR POWER: 1.8 kW (2.5 HP) - POWER SUPPLY: 400 V - WEIGHT: 350 kg Available Accessories: - MK4/B18 drill chuck arbor - Digital readout - Service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Hnedpfx Ashlnzkeanol

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D20E/8022, Nomor penawaran: D20E/8022 Jenis mesin: Mesin penarik kawat ganda - kering Info: Tarikan lurus Merek: VEB Tipe: 8 blok Tahun pembuatan: Diameter masuk: 2,5 mm Diameter akhir: 0,8 mm Jumlah tarikan: 8 Diameter pulley: 400 mm Kecepatan - meter/detik: 15 m Lokasi: Di Eropa Hodpfxewi Tide Aanenl

Kondisi: sangat baik (bekas), GSP M 743 Slot Mortiser Travel (mm): X450 Y500 Ram stroke (mm): 300 Maximum tool-to-table distance (mm): 450 Throat depth (mm): 590 Hjdpjulfuzefx Aanjnl Groove width: 25–30 mm Table diameter (mm): 700 Feed rate (mm/rev): 0.1–2.5 mm/rev Main motor power (HP): 6 Machine equipped with: Automatic feeds / Ram tilt Dimensions (LxWxH mm): 2300x1700x2600 Machine weight (t): 3.5 Overall dimensions: 2500x2200 height 2400

Kondisi: baru, en-001 Hnedpfxjfbbx Rs Aansl

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and Hodpfet Hww Djx Aanenl shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice