Pengumpan bar

FMB Micromag 20/3200"C"

Kondisi: baik (bekas), Tahun pembuatan: 2003, In good technical condition and fully functional. Year of manufacture: 2003. X-axis: 350 mm. Y-axis: 250 mm. Z-axis: 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Hnedpfxeu Tq Hwo Agqok Machine weight: approx. 2600 kg.

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A Spinner simultaneous turning center with three turrets and comprehensive accessories, spare parts, and tooling is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm. Rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700 rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: stations: 3x12, speed: 8,000 rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2,880mm/2,130mm/1,990mm. Weight: approx. 7,500kg. Operating hours: 27,102h. Control: Fanuc 31i. Including Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, an extensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Hodpfx Agjua E Trsqenk

Tahun pembuatan: 2008, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, The system was used for grinding oil purification in carbide processing. Cooling unit: Eckert 3 filter towers with sludge bags Filtration capacity: 80–100 l/min Filtration fineness: 3–5 µm In the description, the system is specified with a sludge drum; technical data are similar. Original manual in paper form available. Hodpfx Aslczcwsgqjnk Videos available upon request.

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Die Maschine kann nach Terminvereinbarung besichtigt werden. Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Hedpfx Agsifi D Tsqenk Lieferung: EXW Székesfehérvár

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Kontrol: SIEMENS Lubang spindel: 65 mm Panjang pembubutan: 660 mm Maks. putaran: 6.000 rpm Spindel lawan Z= 700 mm PEMEGANG ALAT 1 dengan spindle milling Spindle milling: 7.200 rpm Sumbu-B 360° 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 230 / Y= ±65 / Z= 845 PEMEGANG ALAT 2 Hnjdpoyi Uk Iefx Agqek 14 stasiun dengan alat bertenaga Kecepatan alat: 7.200 rpm Perjalanan sumbu: X= 140 / Y= ±45 / Z= 810 Konveyor serbuk (chip conveyor) Filter Bar feeder INDEX MBL

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Hnsdpet Hw N Tefx Agqsk Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Traub TNL 18-7B CNC Turning Automatic Base Machine: Dimensions: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Travel Z: 205 mm Rapid Traverse: 40 m/min Positioning Accuracy Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper mount Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Clamping Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth (Workpiece): 180 mm Max. Speed: 12,000 rpm Strokes: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-Axis Number of Stations: 8 Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -25/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Driven Tool System for Upper Tool Turret Number of Driven Stations: max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System for Rear Unit Number of Stations: 7 Number of Powered Stations: max. 3 Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm Hedpfxowg Takj Agqenk SCOPE OF SUPPLY Includes (not limited to): - Traub CNC Lathe - Tool holders, driven and static - High-pressure and band filtration system - Oil mist separator - Fire extinguishing system - Chip conveyor - Bar feeder - Operating documentation Exact scope of supply as per photo series. No guarantee for the accuracy, completeness or currency of the information provided.

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer Hnjdpfx Agod Iin Heqok - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3550 kg Maximum machining diameter: 32 mm Maximum machining length: 320 mm with 1 clamping chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis of spindle: 0.001° Counter spindle speed: 200–8,000 rpm Maximum clamping diameter counter spindle: 32 mm Maximum front drilling diameter: 12 mm Maximum front tapping diameter: M10 Hjdpsydaadjfx Agqsnk Maximum rear tapping diameter: M10 Spindle through-hole diameter: 37 mm Number of mountable tools: up to 25 depending on configuration Rapid traverse for X, Y, Z axes: up to 32 m/min Bar stock length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory capacity: 5120 m / 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool compensation: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or up-to-dateness of the above information.

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Hnjdpfxjt Hw Rdo Agqek