Mesin bar otomatis

FMB MINIMAG/4200/A

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. Bwsdpsfxyhfjfx Aa Tei In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors Bwodpevzhf Sjfx Aa Tei - Clamping devices - Documentation

Kondisi: baru, Tahun pembuatan: 2026, Prod-Masz provides you with a brand-new, fully functional machine that has been tested under operational conditions. It meets the requirements of applicable standards regarding design and operational safety. - The extension table facilitates the handling of large-format sheet metal panels on the table - Support table with measurement scale - Robust and compact steel construction - High-quality, durable steel blades - Extremely stable and heavy cast-iron construction - Ground and hardened guillotine shear blades - Rear gauge system with scale - CE-certified quality - Declaration of conformity - Suitable for steel sheets up to 1.2 mm - Open design suitable for continuous cutting - Maximum working width: 3000 mm - Motor power: 2.2 kW - Oil type: HL 46 - Pressing force: 4 t - Operating pressure: 120-150 bar Bodpeda I Ihofx Aa Tewi - Equipped with hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg Shipping costs: 500 Euros We look forward to your enquiry!

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P. The machine is fully functional and immediately ready for operation. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: new ball screw Bwsdpfxowbhq Ho Aa Toi 2021: new spindle 2022: single-shift operation 2023: occasional job orders 2024: taken out of operation but remained connected to power 12/2025: disassembled, cleaned, and stored Technical data: X travel: 600 mm Y travel: 650 mm Z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Dimensions (approx.): 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t No fixtures or vices included in the offer. Transport and loading can be organised Europe-wide at extra cost on request. Prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Used machinery - purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Kondisi: bekas, Palet dengan slot T, cocok untuk DMG DMC 100 H dan DMG DMC 100 U. Beberapa palet masih tersedia. Bwjdpoqx Uh Njfx Aa Toi

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Bsdshcnxrjpfx Aa Tjwi Neue Hydraulikpressen verfügbar

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Bwedpfetiwgiex Aa Tei Floor-level installation

Tahun pembuatan: 2022, Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls Bwjdsg Tzbhjpfx Aa Tei • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm • Weight: 470 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.600 mm, Jarak Gerak Sumbu x: 3500 mm Sumbu y: 2500 mm Sumbu z: 1600 mm Meja Kerja Meja putar NC: 2200 x 1800 mm Kapasitas beban meja maks.: 12.000 kg Putaran spindel maks.: 2.500 rpm Konektor alat: ISO-50 Bwsdeyifpfopfx Aa Tsi Aksesori: - Konveyor serbuk/kerokan

Kondisi: bekas, Tahun pembuatan: 2003, Panjang putar 1000 mm Lubang spindel 65 mm Diameter putar maksimum 300 mm Putaran spindel 4000 rpm Putaran alat putar 4000 rpm Revolver dengan 12 posisi Kontrol: Mazatrol 640 T Nexus Bsdpfox N A I Nsx Aa Tewi Dilengkapi dengan: 3 pcs alat putar Berbagai jenis dudukan alat