Mesin pengikat tepi

Format 4 Perfect 710 E-Motion

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Iedpevvkfdofx Aahotr Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, de-Automatisches Be- und Entladen Erweiterte Bearbeitungsmöglichkeiten Ideal für die Serienfertigung Steigern Sie Ihre Türzargen-Produktion mit der Centauro Alfa Jamb, einer hochmodernen Maschine für das automatische Be- und Entladen sowie die Bearbeitung von Türzargen und Jambs. Mit Präzision, Effizienz und anwenderfreundlicher Technologie ist die Centauro Alfa Jamb die ultimative Lösung für die Türzargenfertigung. Der leistungsstarke CNC-Fräskopf ermöglicht sowohl vertikale als auch horizontale Bearbeitungsoperationen. Dieser vielseitige Fräskopf eignet sich ideal für das Ausfräsen oder Nuten von Scharnier- und Schlossplattenaussparungen und gewährleistet dabei höchste Präzision und Wiederholgenauigkeit. Zusätzlich ist ein spezieller Kleinfräser zum punktgenauen Bohren der Scharnierlochbefestigungen sowie zum Ausstoßen der Ecken von Scharnieraussparungen enthalten, um die Genauigkeit und Oberflächenqualität Ihrer Produkte weiter zu erhöhen. Die Alfa Jamb automatisiert den gesamten Prozess vom Beladen bis zum Entladen, sodass Ihre Bediener sich auf höherwertige Aufgaben konzentrieren können, während die Maschine die wiederkehrenden Arbeiten übernimmt. Die Programmierung ist dank des neuesten TOP12-S Farb-Grafik-Touchscreen-Controllers besonders einfach. Die benutzerfreundliche Oberfläche verfügt über vorinstallierte elektronische Makros, die eine schnelle und unkomplizierte Einrichtung sowie Anpassung der Bearbeitungsprozesse ermöglichen. Technische Daten Achsenwege: Itedpfjul Uaaex Aahsr X-Achse: 2800 mm Y-Achse: 180 mm Z-Achse: 150 mm Geeignet für Zargengrößen: 2400 mm x 200 mm x 75 mm Fräs-/Bohrkopf: 3,3 kW, ER25-Spannzange, 0–18.000 U/min Pilothohlbohrkopf: 2,2 kW, ER25-Spannzange, 0–18.000 U/min 3 pneumatische, vertikale Werkstückspanner, automatisch über das Programm gesteuert 3 pneumatische, horizontale Werkstückspanner, automatisch über das Programm gesteuert Top 12-S Industrie-Touchscreen-Steuerung 12" mit einfacher Makro-Programmierung CE-konforme Sicherheitsverkleidung seitlich und hinten, vorn mit Lichtschrankenvorhang Absauganschluss 120 mm Druckluftversorgung 6 bar Gesamtmaße: 9644 x 1844 mm Gesamtgewicht: ca. 2.000 kg Gesamtanschlussleistung: 5,6 kW Baujahr: 2023, CE-konform Zustand: Neuwertig, nur für Vorführzwecke im Showroom genutzt.

Kondisi: siap digunakan (bekas), Technische Daten Itodpet N Autsfx Aahjr Druck: 2,2 kg/cm² 18 kW Thermoölkessel zeitgesteuerte Pressung digitales Display Leistung und Motoren Spannung: 400 V Anschluss: Drehstrom Leistung: 20 kW Abmessungen gesamte Länge: 3.500 mm Breite: 1.500 mm Gewicht: 3.200 kg

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Maximum workpiece height: 280 mm, tool holder: HSK 63F, weight: 6.5 t, an inspection is possible. Itjdpfx Aon Tpm Hjaher

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Itjdpovvkfwjfx Aahjr

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Itodpfx Aaev Szt Dehor Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with saw blade diameter 450 mm: 75 - 150 mm Iodpfox Dax Esx Aahetr Cutting height with saw blade diameter 350 mm: max. 100 mm (each at 90° saw blade position) Double roller carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via input at the control panel Motorized tilting of the saw unit via input at the control panel Supplied with new 350 mm saw blade mounted 2-axis scoring saw unit, adjustable via the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table surface when not in use Scoring unit adjustment possible while the machine is running RAPIDO scoring saw blade — facilitates adjustment of scoring width, set up within max. 3 minutes Adjustment range 2.8 – 3.8 mm Additional equipment: - Telescopic crosscut fence extendable up to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g., for trimming cuts on solid wood planks

Kondisi: bekas, Tahun pembuatan: 2011, panjang total: 4.000 mm, tinggi total: 1.600 mm, lebar total: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units: 6 - 1st unit type: Premilling unit - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit - 5th unit type: Radius scraping unit - 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) Iodpfx Aajwnickohetr - Transport weight [kg]: 1300kg - Number of transport packages: 1 Financial Information VAT: The stated price is excluding VAT VAT / margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any items from the industrial sector Yorick Diebels

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, MESIN GERGAJI PANEL HOLZMA HPP250 320x320 Panjang potong: 3200 mm Isdpfsxugdvjx Aahjtr Lebar potong: 3200 mm 3 meja udara Kontrol daya Tahun produksi: 2007

Kondisi: baru, Tahun pembuatan: 2024, NEW MACHINE ENQUIRIES: Please understand that we only offer this new machine within our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Enquiries from outside these regions will not be answered. ----- New machine Year of manufacture: 2024 Features and technical data: - Base machine 1057 XL C with Beckhoff touch-screen control - Extendable workpiece support, 600 mm - Extension for extendable support arm - Standard infeed fence - 3 LED lights in the infeed area - Jointing unit with 2 motors - DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation - Edge feeding unit 1903, fully automatic - Glujet 301 adhesive application system - Automatic reloading function - Magazine for 1.4 kg cartridges (4 cartridges capacity) - GluJet collection container - Pressure unit 1912-3, pneumatic - GM 201 spraying device after pressure unit - 1918 cross-cut unit, pneumatic - Extraction hoods for cross-cut unit - FR201 combination milling unit with DIA cutters R=2 mm Isdow I U Rfjpfx Aahotr - 1832 contour milling unit - Shelf program - ZK 301 radius scraper blade - Chip collection box - FK 701 flat scraper blade - TR201 spraying devices, front and rear - 1940 buffing unit Availability: short notice Location: Flörsheim