Pusat mesin

FORMAT-4 profit H10 22.43

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: Gsdek Dpp Sspfx Aabsua High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Kondisi: baik (bekas), Tahun pembuatan: 1979, Model engineering milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model engineering mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle mount: SK30 - Drive: 1.1 kW Gusdonzpx Rjpfx Aabea - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Kondisi: baik (bekas), Tahun pembuatan: 2019, CNC through-feed machining center with dual clamp drive in X-direction and portal design in Y-direction. The second gripper allows for trimming up to 15 mm, as well as continuous milling movement in the X-direction. The workpiece length (X-direction) is measured using a sensor. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Gjdpfx Asxrahceabsua Milling spindle 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic loading or unloading of tools into the machine. Can also be used as an additional tool position for 11 virtual tools. Automatic tool length measurement system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables front and rear, foldable Machine software WOODFLASH with - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workplace license Dongle upgrade 3D simulator with collision checking for WOODFLASH on the machine Workpiece release at the rear of the machine Machine supplied without tools and HSK adapters

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Guedpfxedfgg Ij Aabsa D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: bekas, nomor mesin/kendaraan: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool stations: 16 Gedpjwuz N Nsfx Aaboua

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Features: - Sliding table made of anodised aluminium, including high-precision guide made of hardened and ground steel - Sliding table lockable in any position - Saw blade guard with swing-away feature - Extension arm with adjustable mitre fence including length compensation every 5° and at 22.5° - Mitre fence and excenter clamp - Belt switching for speed change from above (access via machine table) Gjdpfx Aasrrw Ucjbsua - Indicator lights for selected saw blade speed - 3-axis control unit via 15'' TFT touchscreen on a Windows platform, including 2,500 program memory slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electro-motorised height adjustment and motorised axial pulse adjustment, including digital readout for height and width - Mitre fence with 3 position stops; 2 stops with digital readout, 1 stop analogue but digitally adjustable via linkage to one of the digital stops - Overhead control panel including automatic star-delta starting - Electrical system and safety devices according to CE standard Technical data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding table dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. cutting height with 500 mm blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw 7.5 kW / 10 HP / 50 Hz, scoring saw 0.55 kW / 0.75 HP - Sound level according to EN 27960: 84.4 – 2565086.3 dB(A) - Extraction ports: 1 x 120 mm, 1 x 100 mm - Mitre fence extendable to 3,400 mm

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Gusdowka N Topfx Aabsa Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.300 mm, tinggi penggerindaan: 160 mm, jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 2.150 mm, Heesemann JSM 1350 RC Surface Sanding Machine Year of manufacture: 2025, brand new machine, currently the only exhibition machine available in Europe! - Electronic height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units equipped with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - Industrial PC 15.6" Guodpfswcqr Asx Aabea - Program memory for 100 programs - Remote service - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Front calibration roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table pre-configured (drilled) for vacuum blower connection - Vacuum blower (integrated in machine) - Workpiece cleaning with oscillating air nozzle - CSD (Magnetic pressure beam) The machine is connected and can be inspected on site by appointment. Please do not hesitate to contact us if you have any questions.

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Gedjxy Tmnopfx Aabjua Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2011, Besar area kerja pada arah X: 2770 mm Besar area kerja pada arah Y: 1220 mm Ketebalan pemrosesan (ukuran Z): 80 mm Konstruksi mesin: mesin portal Daya spindle utama: 11,0 kW Kecepatan spindle utama: 1500 - 24000 rpm Spindle dengan kontrol vektor: Ya Sistem penjepitan: HSK 63 F Pendingin spindle: Pendingin udara Jumlah sumbu: 3 Penukar alat: Ya Tempat alat: 10 unit Keyboard mesin tik: Ya Mouse: Ya Sistem program: Xilog Plus DXF Interface: Ya Koneksi online memungkinkan: Ya CD Rom Drive: Ya Tipe meja: meja grid Sistem pemberhentian: silinder pemberhenti Jumlah pompa vakum: 1 Kapasitas pompa vakum: 250 m³/h Pengaman: alas pijakan keselamatan Lokasi gudang: Sonnefeld Gujdpfxovvi Hte Aabsa