Mesin penggilingan

Friedrich Deckel FP4A

Tahun pembuatan: 1988, Kondisi: bekas, Voest Alpine DA 160 lathe, year of manufacture 1988, equipped with a three-jaw chuck and Multifix toolpost. Can be demonstrated under power by arrangement. Csdoma Snxopfx Abhopu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Codpfx Abovbifgehspu Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic transmission - Automatic clamping on X, Y, and Z axes - Central automatic lubrication - Coolant system Cpodpfxowhk Ubo Abhsu - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working Area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main Drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse - Power: 3.7 / 4.4 kW - Spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed Drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table Slide: - T-slots quantity: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (with safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Kondisi: baik (bekas), Tahun pembuatan: 1995, Universal tool milling machine Deckel FP 1 – several machines available (see photos) Model: FP 1 3-axis digital readout (Heidenhain) Cedpfjtdcfhsx Abhopu Price: from €9,500 excl. VAT Technical data: X travel: 300 mm Y travel: 150 mm Z travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range – vertical: 250 – 2,000 rpm Spindle speed range – horizontal: 40 – 315 rpm Spindle speed steps (working spindle): 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm Cpodpfjrmkfnox Abhsu • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baik (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 328501, Penawaran 25366 Data teknis: Codpfx Aexu U Sujbhspu - Kapasitas pengeboran: 25 mm - Dudukan spindle bor: MK 3 - Kecepatan spindle bor: 100 / 205 / 345 / 440 rpm, 695 / 885 / 1450 / 2900 rpm - Stroke spindle bor: 130 mm - Overhang spindle bor: 260 mm - Meja koordinat dengan 3 alur-T: 580 x 240 mm - Gerakan meja: Sumbu X 415 mm, Sumbu Y 155 mm - Penggerak: 400 V / 0,75 / 0,9 kW - Ruang yang dibutuhkan: sekitar P 900 x T 1800 x L 700 mm - Berat: sekitar 270 kg - Ragum mesin

Kondisi: siap digunakan (bekas), Deckel_FP2NC_DE_EN Cpedpexfkm Ajfx Abhju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE Compliant, from Training Workshop! Technical Specifications: Cedpfx Aboxuppuehopu - Year of manufacture: 2010, Machine No. 347283 - Rigid angle table - Spindle speed: infinitely variable up to 4,500 rpm - Variable feed rate in 3 axes: 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill travel: 60 mm - Vertical and horizontal quill – ISO 40 - Hydraulic clamping system - Weight approx.: 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operator manual for the control system, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition with very few operating hours. It comes from a facility where it was solely used for training purposes. The control system is user-friendly and intuitive. The machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is fast and easy thanks to the swiveling vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann machine has undergone mechanical and electrical inspection at our facility. You are welcome to visit us and test the machine under power on-site. There are 7 pieces of Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are immediately available.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Control: Deckel Dialog 11, equipped with a vise, inspection possible. Cpodpfxeqi D S Uj Abhou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Machining centre Manufacturer: KNUTH Model: EcoMill 350 CNC Codpjtiauhjfx Abhopu