Mesin uji tarik ISO527 dan lainnya

GALDABINI Q2,5

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Nwedpfxjbqt Arj Abved We can also offer you an Entex PL WE 70!

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Shaft diameter: 69.95 mm Nwjdpfx Abjt Apugevjd See video The machine is located in our warehouse in Gussago (BS), powered up. Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Tahun pembuatan: 2010, jam operasional: 29.000 h, Kondisi: sangat baik (bekas), DE27699 Nsdpexykcgefx Abvowd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, 2 identical machines available from year 2021. The machines were only operated briefly for testing purposes in a large warehouse and were subsequently professionally dismantled and stored. Therefore, they are in excellent, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It was designed to strap a large number of pallets of varying sizes vertically using PP or PET strapping. This system is reliable, easy to operate, and can be installed in confined spaces thanks to its compact dimensions. - Suitable for PP and PET strapping - Vertical strapping - Tension up to 5,500 N - Siemens PLC S7 - Compact design, minimal footprint Nwjdpow Htz Ijfx Abved - Easy access to all mechanical components - Simple operation with touchscreen The machines have been professionally dismantled and stored – immediately available. Additionally, 90 brand new, original Cyklop strapping rolls (still in original packaging) are also optionally available.

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM Like new, unused The PTUN... module is an individual drying unit for plastic material. The machine consists of the following components: • Hopper • Support frame • Heating chamber Nodpfxovhb S Ss Abvewd • Connecting pipes • Air control valves.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, de-1 Nwedpfx Abjrwnyvevsd

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Nwsdpfx Abjilqvrevjd Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Kondisi: bekas, Regoplas RT50 Термо-масляный терморегулятор Термо-масло до 300°C Nwodpfedmn E Hox Abvsd

Tahun pembuatan: 2018, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead Travel: 520 mm Working Depth: 66 mm Nwjdpet Rg H Ajfx Abvod Overall Height: 1010 mm Weight: 45 kg Test Speed: 1 to 500 mm/min Return Speed: 500 mm/min Travel Resolution: 0.01 mm We offer a wide selection of grips: screw clamps, wedge grips, pneumatic and hydraulic grips. Compression plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on extensometers, climate chambers. Load cells selectable in 50N, 100N, 200N, 500N, 1000N, 2000N or 3000N versions. Includes Hess software for Windows 8, 9, 10, or 11 for universal testing procedures, simple testing also possible without a PC, and one 5kN SP 56g screw grip with pyramid or rubber jaws 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring devices. Calibration for both tensile and compression modes in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust aluminum and stainless-steel (V2A) frame equipped with recirculating ball screws, linear ball bearings, and belt drive. The bellows cover protects spindle and guides. The testing machine is microprocessor-controlled and equipped with a membrane keypad. The two-line LCD display shows force and travel values. The machine can be operated as a standalone unit or connected to a PC via USB interface. Travel is measured by an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001 mm). The machine comes with a standard load cell: 0.03% linearity and corresponding calibration. An optional second channel allows for an additional load cell or displacement transducer. The universal testing machine is available with two different travel distances: 500 mm or 1200 mm (with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N or 3000N), certificate, 220V power cable, USB cable, user manual, and CE declaration of conformity. Load Cell 3000N Measuring Range: 1-3000N (tension and compression), with nominal 2mV/V output signal Overload Protection: +/-100%, Linearity: +/-0.05%, Hysteresis: +/-0.03%, Repeatability: +/-0.02%, including 1.5 m connection cable and calibration certificate.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation Nedpfx Abog Ezarevswd - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.