Mesin bubut tengah

GALLIC 16

Tahun pembuatan: 2006, Kondisi: bekas, Cross Stacker Gaemmerler KL 540 with Integrated Blocker VM 500 The KL 540 Cross Stacker operates using the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and ready for operation Technical Data: Cycle Time: ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo ejector (depending on product) Number of Pages: 4 – 96 (heatset / gravure) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal ejector) B: 140 – 500 mm D: max. 560 mm Nsdpfoh Nrh Usx Abgoli Layer Height: max. 200 mm Stack Height: max. 300 mm Weight: approx. 1,500 kg Blocker Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and a blocking time of 2 sec. The cycle time per package increases if the blocking time is increased or the package height is reduced. The cycle time is also heavily influenced by the ejection speed of the cross stacker and therefore by the product (surface, format). Formats: Width: 140 to 500 mm / 5.5" to 19.7" Length: 105 to 330 mm / 4.13" to 13" Stack Height: 55 to 400 mm / 2.16" to 15.7" Infeed Height: 890 mm / 35" Outfeed Height: 890 mm / 35" Connection Load: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air Requirement: 1000 Nl/min, 6 bar; non-lubricated, dry air Weight: approx. 500 kg

Kondisi: bekas, Tahun pembuatan: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm - min. 100 mm Y-axis travel: max. 1000 mm - min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Thickness: max. 60 mm - min. 5 mm Spindle speeds: stepless, adjustable 1 - 1,000 rpm Feed rate: steplessly adjustable, rapid traverse 1 mm/min Nlsdpfx Ajgvkkzjbgoi Feed rate: steplessly adjustable, working feed mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 - 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC Plate Drilling Machine HMB PBM1000/60 - W12 for drilling end plates and base plates in structural steelwork, equipped with tool changer (12-position) Number of drill spindles: 1 pc. Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Kondisi: baru, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Nodpsga Tyzefx Abgsli Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout, brand SINO * Automatic longitudinal feed of the worktable * Drill chuck with arbor ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head electrically height-adjustable * Various tools in case

Kondisi: baik (bekas), Mesin bubut lead dan feed screw SUI 40/1000 dengan aksesori Nljdpfxexcf H Es Abgoi

Kondisi: bekas, Tahun pembuatan: 1985, 20240607-bohrmaschine Nlodovcrmpopfx Abgei

Kondisi: baru, Cutting diameter: 225 mm Saw band length: 2480 mm Maximum cutting width: 245 x 150 mm Voltage: 230 V Drive power: 1.5 kW Saw band dimensions: 2480 x 27 x 0.9 mm Mitre cuts: 0 - 60° Cutting speed: 20 - 90 m/min Machine weight: approx. 185 kg Space requirement: approx. 1.4 x 0.69 x 1.7 m NEW MACHINE PRICE: 2,459.00 EUR + VAT - Infinitely variable speed - Infinitely adjustable feed - Mitre cut - Bi-metal saw band - Material stop Nlodponlbmzjfx Abgei - Machine base - Coolant system

Kondisi: baru, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over carriage: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 – 1600 rpm) Tailstock quill diameter: 75 mm Tailstock quill stroke: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: Nsdpfx Aehhm Edsbgjli - Longitudinal and cross feeds - Rapid traverse for longitudinal and cross feeds - Adjustable stops for automatic longitudinal feed - Leadscrew for metric/inch/module/DP thread cutting - Multifix-type quick-change toolpost - 2-axis digital readout (brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Face plate Ø 630 mm (Camlock) - Fixed steady rest Ø 120 – Ø 260 mm - Follow rest Ø 20 – Ø 80 mm - Coolant system

Kondisi: bekas, Tahun pembuatan: 1973, nomor mesin/kendaraan: 20591, Roller diameter: 500 mm Throat depth: 1050 mm Workpiece height: 400 mm Voltage: 400 V Nodpfocxxr Eex Abgsli Table size: 750 x 800 mm Total power requirement: 5.5 kW Machine weight approx.: 1.5 t Required space approx.: 2.4 x 1.0 x 2.2 m Bandsaw in robust cast-iron design, equipped with infinitely variable variator drive and 4 pre-selectable gearbox stages. Cutting speed adjustable: Stage 1: 15–79 m/min, Stage 2: 67–305 m/min, Stage 3: 207–940 m/min, Stage 4: 2350 m/min. Includes blade tensioning device, worktable tiltable by +/- 40°, rear extension table, various saw band guides, belt grinding device, work light, foot switch, accessories.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, nomor mesin/kendaraan: fortlaufend, Centre height: 200 mm Centre distance: 1,000 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 52 mm Speed range: 9–1,600 rpm Njdpfj Nh Hxox Abgsli Spindle nose: Bayonet DIN 5027 KK6 Longitudinal feed range: 0.028 – 6.43 mm/rev (93 steps) Cross feed range: 0.012 – 2.73 mm/rev (93 steps) Metric threads: 0.5 – 224 mm (48 steps) Inch threads: 72 – 1/8 tpi (46 steps) Module threads: 0.5 – 112 (42 steps) Diametral pitch threads: 56 – 1/4 DP Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,100 kg Dimensions: 2,672 × 975 × 1,230 mm Equipment: Digital readout for 3 axes (SINO brand), 3-jaw chuck Ø 250 mm, 4-jaw face plate chuck Ø 400 mm, fixed and travelling steady rest, coolant system, splash guard, rapid traverse, manual central lubrication, 4-way tool post, work lamp.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to its standard quill feed. The dovetail guide of the gearbox head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed (12): 50 - 2520 rpm Spindle taper: MT4 Quill stroke: 120 mm Quill feed (3): 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle/table: 40 - 485 mm Travel (X / Y): 550 / 190 mm Milling head vertical adjustment: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Weight approx.: 285 kg Standard equipment: - Automatic quill feed and tapping unit Nodovutw Hepfx Abgeli - Wide speed range 50 - 2520 rpm (12 steps) - Adjustable dovetail guides for X, Y, and Z axes - Versatile applications: slot milling, face milling, boring, etc. - Heavy-duty, large cross table with precision-ground surface - Milling: quill movement via hand wheel - Drilling: quill movement via hand wheel - High-quality aluminum motor designed for continuous operation - Stable, vibration-free cast iron construction - Simple and quick speed change via shift lever - Swiveling milling head for angle drilling, chamfer milling, etc. Location: ex stock 54634 Bitburg - Available at short notice -