Pers tubuh

Ganner - sofort verfügbar - Concept 70 Eco

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; Hedpfxoiidm Nj Anpefn - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Hfedpfxsg Tu Rks Anpjn Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Tahun pembuatan: 2026, Otomatis CNC bor dan penanam pasak untuk pengeboran, lem, dan penanaman pasak sepenuhnya otomatis. Pusat pemrosesan bor dan pasak dengan keunggulan compact, efisien, berkualitas dan fleksibel. Hedpfx Anedx Axfspjfn Perkenalan singkat: • Mesin bor dan penanam pasak CNC universal yang dikendalikan komputer • Pengawasan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan panel dan kayu solid • Spindel bor horizontal dan vertikal tambahan opsional • Mengurangi beban pada pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Hfedpsg A D Anjfx Anpen Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Aktions-M-Rahmenpresse Presse für alle Arten von Fenstersystemen: Fenster, Lamellenläden, Fensterläden und Massivholztüren. Maximale Arbeitsabmessungen L x H: 3500 x 2500 mm Minimale Arbeitsabmessungen L x H: 250 x 375 mm Maximale vertikale/horizontale Presskraft: 7,4 / 2 t Arbeitshöhe: 480 / 1050 mm Hydraulikpumpenleistung: 2,1 kW MASCHINENZUSAMMENSETZUNG: - Aktions-M Rahmenpresse Stk. 1 - 109831 CE-Norm entsprechend SM 1 Hedpfowh T Dlox Anpofn - R00494 Aktions M 35-25 1 - 930731 Spannung 400 V EU 1 - 931201 Frequenz 50 Hz 1 - 530074 Arbeitsflächen aus PVC-beschichteten Trägern 1 - 530075 Manuelle Zwischentraverse komplett mit Kolben und Gegenanschlag 1 - 530076 Hydraulikanlage für Niederdruckbetrieb 1 - 530077 Vorrichtung für trapezförmige Produkte mit schwenkbarem Kopf zur Anpassung an verschiedene Fenstereckausbildungen 1

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): Hfsdpfol Rix Eox Anpjn -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Tahun pembuatan: 2017, Kondisi: bekas, Barbaric TSRET04 Rücklaufsystem, Baujahr 2017 Hedpfx Ajx Rpgbsnpofn Gebrauchtgerät Das Barbaric TSRET04 ist ein Werkstück-Rücklaufsystem für Kantenanleimmaschinen und stellt die Basisausführung der TSRET-Serie dar. Hauptfunktionen sind das Umsetzen der Werkstücke am Ende der Kantenanleimmaschine sowie deren Rückführung auf Höhe des Werkstückeinlaufs der Maschine. Funktionsweise: Nach Austritt aus der Kantenanleimmaschine gelangt das Werkstück auf einen Rollentisch. Dort tauchen quer zur Förderrichtung angeordnete Gurtbänder aus dem Rollentisch auf, heben das Werkstück an, fördern es quer und setzen es auf einem leicht abgesenkten Rollentisch ab. Dieser transportiert das Werkstück weiter auf ein Förderband. Am Ende des Förderbands befindet sich eine leicht geneigte, angetriebene Rollenbahn, die zum Einlauf der Kantenanleimmaschine führt. Ein Endanschlag stoppt das Werkstück am Ende der Bahn. Technische Daten: - Maximale Traglast: 60 kg - Maximales Plattenformat: 2.800 x 1.300 mm - Maximale Taktzeit: 11 Teile/min Abmessungen: - Rücklauf: 2.293 x 1.961 mm - Förderband: L 2.500 x B 800 mm - Rollenbahn: L 2.000 x B 800 mm - Gesamtlänge: ca. 6.943 mm - Gesamtbreite: ca. 2.239 mm Verfügbarkeit: kurzfristig。 Standort: Flörsheim

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Hfodpoi Hn Srsfx Anpen Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: baik (bekas), Price plus VAT. The goods are also available in other quantities and configurations. This package includes: Hfodpoibwrujfx Anpjn 14 uprights, 5,000mm x 1,100mm (blue) 78 beams, 2,700mm (yellow) 156 safety pins This results in a racking row with 13 bays, each with 3 levels plus floor storage position—a total of 156 pallet spaces (1,000 kg per pallet). Approx. 70 uprights and 1,000 beams are available for this system. Please feel free to contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Total length: approx. 36.50 linear meters Racking depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 2,400 kg Bay load: 12,000 kg Pallet positions: 156 Accessories such as: - Floor anchors - Connectors - Load warning signs - Impact protectors - Guardrails - Wire mesh shelves - Rear mesh panels - Support bars - Barrier rails ...and much more. Just ask for a quote!

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal stop flaps • Support table with roller • Push stick Hfedpfx Anjd N S T Djpsn • Independent scoring unit with dedicated motor • Operating tools Features • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°