Pers tubuh

Ganner Concept 70 ECO

Kondisi: bekas, Tahun pembuatan: 2024, Exhibition machine Garbsen – new, complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted design - Lamella press beam at the TOP with 6 elements, lamella press beam on the SIDE with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) consist of 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromechanical adjustment of both press beams via precision trapezoidal screw spindles (with increased thread pitch and concentricity accuracy), and high-performance lead nuts with grease reservoir - Pressing occurs electromechanically, via 2 separate helical geared motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and regulated by frequency converters, providing completely wear-free press force control - Pressing force for horizontal press beam: min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press beam: min. 300 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, adjustable by 3-stage selector switch 5 / 10 / 25 mm/sec - Extremely easy operation via 6 individual push buttons, 8 movement sequences selectable via control system Godox Twc Ajpfx Adtjil - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories Machine feet Surcharge for rapid traverse positioning per piece, for fast positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts Set of machine feet for working height 500 mm per piece Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2015, Feed unit Exhibition model Year of manufacture: 2015 3-roller feed Roller diameter: 120 mm Roller width: 60 mm Roller spring travel: 20 mm Feed speed Giodpfx Adom Rmf Sstel Forward and reverse: 4 / 8 / 11 / 22 m/min Motor: 0.75 kW / 400 V Weight: 28.5 kg Availability: from stock Location: Flörsheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. Gijdpfx Adow Tdymetsl - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Gedpsw Td A Iefx Adteil Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Veneer Splicing Machine Model: KUPER FWJ 920 In very good condition. Godpfx Aetq Ey Tjdteil

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Gijdpfx Aob Eln Dodtel

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) Gjdpfeiidm Nox Adtoil - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 2009, Kondisi: bekas, Used machine Year of manufacture: 2009 Condition: refurbished Description: The machine’s concept is straightforward. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece inside the machine. After actuating a foot switch, the workpiece is pneumatically clamped and automatically conveyed to the drilling unit (30 m/min). The vertical spindles drill from below, ensuring the resulting chips do not accumulate on the workpiece as is typical with machining centers. The horizontal spindles operate on two sides of the workpiece. The workpiece length is unlimited, as it is conveyed towards the drilling unit (X-axis). The drilling spindles can be programmed individually or as a group and move along the Y-axis. Drilling depth and horizontal drilling operations are controlled via the Z-axis. After all drilling operations are complete, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. Unlike conventional machining centers, where the workpiece must be clamped using vacuum and the suction devices adjusted to the size of the workpiece, this setup step is entirely eliminated with the 3-axis CNC point-to-point boring machine. Advantages: - High processing speed - Excellent price-performance ratio - Compact footprint All types of drilling can be performed in the smallest space: - Line boring - Construction boring - Fitting boring - Cabinet connection boring Equipment: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled feed of the panel by means of "overlapping" pneumatic clamping gripper - Y: NC-controlled drilling head movement - Z: NC-controlled spindle depth setting Godjwmhmfopfx Adteil - TRK precision linear guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs in the infeed area - Pneumatic clamping gripper for transport - Pneumatically lockable side stop with rollers - Control via PC running Windows XP (1 GB Flash memory) - 8” color display - Alphanumeric multifunction keyboard incl. mouse - Network card - USB interface Technical Data: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed speed (X-axis): 30 m/min - Spindle speed: 3,400 rpm - Maximum drill diameter: 35 mm - Maximum overall drill length: 70 mm - Drill chuck: 10 mm shank with flat - Connected load: 2.5 kW - Suction nozzle diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support at infeed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: short-term Location: North Rhine-Westphalia

Kondisi: bekas, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Speeds: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Worktable dimensions: 300x1100 mm Adjustable fence arms Giedpfx Adeh Dzxzetel Motor power: 5.5 kW Power supply: 380 V Manufacturer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Kondisi: bekas, lebar total: 600 mm, panjang total: 700 mm, tinggi total: 700 mm, 00001 Godpfx Adow N Nq Aotjil