Mesin bor dowel

Ganner Optima 21

Kondisi: bekas, Tahun pembuatan: 1997, Mesin bekas Tahun pembuatan: 1997 Kondisi: terawat Perlengkapan dan data teknis: Hfodoygbpropfx Abhoc - Jumlah poros bor: 21 buah dengan jarak 32 mm - Arah pengeboran: dari bawah & sisi depan - Kemiringan: 0-90 derajat dengan roda tangan - Penjepit material pneumatik: 3 buah - Bukaan maksimum: tinggi maks. 100 mm dan lebar maks. 640 mm - Motor: 1,5 kW - Diameter saluran ekstraksi: 120 mm - Termasuk berbagai penahan (lihat gambar) Ketersediaan: segera Lokasi gudang: 65439 Flörsheim

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 690924, Connection rating 380V 1.84kW Speed 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing 640 mm Spindle rotation: 11 right-handed, 10 left-handed, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop Hfodpfx Aeh U Damebhsc 1x mitre stop Please note: We are unable to respond to inquiries without complete contact details.

Kondisi: bekas, Connect Four – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions OUR OFFER Chipboard approx. 4,000 m² Panel size: 3,200 mm x 1,000 mm x 38 mm P6 coating Net square meter price: €8.00 This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customised offer to meet your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. TERMS OF PAYMENT Payment terms are to be agreed in the event of an order. The price indicated is per piece/net price or as specified in the item description (plus VAT). You will, of course, receive an invoice with VAT stated separately. ABOUT US Hfsdpjvdqhbsfx Abhsc DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.

Kondisi: bekas, Tahun pembuatan: 2000, With electric height and tilt adjustment Used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine No.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm Tiltable up to 45° Hfodpsvxlq Hjfx Abhsc Scoring unit preparation Parallelogram guard Extension of table Aluminium parts anodised Height adjustment: electric Tilt adjustment: electric Digital display: - Cutting angle - Speed Extraction connection: D 120/80 mm Required space: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Kondisi: baru, Tahun pembuatan: 2026, Grinding of irregularly shaped materials using the side table Easy and quick sanding belt replacement with a lever Movable sanding unit enables horizontal and vertical operation An additional height-adjustable table included as standard Tensioning device ensures uniform sanding belt tension Compact dimensions with a wide range of applications Technical specifications: Belt dimensions [mm]: 2010 x 152 Working table dimensions [mm]: 790 x 221 Hfedpfxovuggzo Abhsc Table height [mm]: 810 Stand height [mm]: 600 Auxiliary table for rounding, dimensions [mm]: 514 x 221 Maximum sanding length [mm]: 790 Extraction nozzle diameter [mm]: 100 Front and edge sanding at an angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 The listed price is net. Transport costs not included.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Three-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data entry via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cuts with extendable fence mm: 3200x3200 Tilting range degrees: 0°/ +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Hjdpeyftzkjfx Abhefc Scoring unit speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note for used machines: • Technical data and prior sale subject to change and errors excepted. • Prices listed are ex-location – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2012, Base machine Olimpic K 800 "T-ERL" (47), 1 pc STANDARD EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of work units - Swiveling control console - Support roller conveyor with ball-bushing guides along entire machine length - Protective and noise-reduction hood with separate doors between gluing and finishing units - Extraction ports arranged on the noise reduction hood - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: Hodpox Twdtsfx Abhsfc - Feed chain with rubber sliding pads, featuring a high coefficient of friction, mounted on 1¼” industrial chain - The chain runs on 2 guides made of hardened and ground steel, one round and one flat, to ensure straight feed and prevent lateral deviation - Automatic central lubrication for the feed chain - The upper pressure beam is a thick-walled steel structure fitted with double rows of roller bearings and protective device for pressure rollers - Manual lifting of the pressure unit with automatic positioning of the working units when changing panel thickness - Mechanical digital display for monitoring selected panel thickness CONTROL “ORION 100” Control system with PLC, allowing fast, simple, and error-free execution of individual processing programs (max. 60 programs). Manages pneumatic positioning of units, if equipped on the machine. (The control system does not include pneumatic positioning.) - Alphanumeric keypad and display - Function keys for quick access to processing units - Operating temperature range from 0 to +45°C MAIN FUNCTIONS: - Control of work units and automatic activation of motors - Monitoring and adjustment of glue pot temperature - Selection between longitudinal and cross processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: quantity, edge tape consumption, total chain feed distance - Measurement unit selectable in mm or inches Technical data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max edgebanding thickness, roll material: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. dimensions of edge strip: 135 mm² Rotary table diameter: 780 mm Max. excess relative to panel thickness: 4 (2+2) mm Min. panel width (with minimal 210 mm length): 55 mm Min. panel length (with minimal 100 mm width): - with strip or roll edge max 3 mm: 140 mm - with solid wood edge: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard equipment: - Pre-milling unit at infeed RT-E - Edgebanding station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for flat scraper - 1 S free space for flat scraper, universal mill, or buffing unit - 1 F free space for blowing nozzle unit European safety regulations (CE marking) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for versions ER2, T-ERS, and T-ERL Enables all necessary adjustments during every job change, directly from the control console. Includes: - Time-controlled pressure unit - Pneumatic and independent swiveling of the end saw blades (front/rear) - Pneumatic remote adjustment for the flush trimming unit RI/800

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Hsdpoxnlflefx Abhefc Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: baru, Tahun pembuatan: 2022, Neumaschine Baujahr 2022 Hjdpfow I Utgox Abhefc Hängendes Bedienpanel mit Siemens-Steuerung und 10" großem Touchdisplay Steuerung der Sägeblatthöhe/-neigung und Positionierung des Parallelanschlags über das Bedienpanel Max. Schnitthöhe 200mm Vorritzeinrichtung mit separatem Antriebsmotor Hauptsägeblatt mit Riemenantrieb und Drehzahlen 2800/3665/4800 min¯¹ Hohes Eigengewicht sorgt für vibrationsfreien Lauf Großer Auslegertisch mit Materialrolle Ausziehbarer Aluminium-Längsanschlag mit zwei Klappanschlägen und digitaler Positionsanzeige 7,5 kW starker Hauptmotor auf robustem Rahmen aus Gusseisen montiert Vierfach gelagerter Formatschiebeschlitten aus eloxiertem Aluminium mit hoher Verwindungssteifigkeit Mehrfacharretierung am Schiebetisch Serienmäßig mit Tischverbreiterung und Tischverlängerung aus starkem Blech Große Pendelschutzhaube bequem mithilfe einer Gasdruckfeder hochschwenkbar Sägeblattklemmung über werkzeugfreies Rapid-System Standort: Hochheim Verfügbarkeit: kurzfristig

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2000x3010x1250 mm Weight: 400 kg Total Power Requirement: 4 kW Combined Circular Saw and Spindle Moulder KSF-315-2000 Saw: - Table size: 860 x 450 mm - Table height: 850 mm - Table extension: 500 x 310 mm - Table widening: 800 x 880 mm - Outrigger table with roller: 750 x 580 mm - Sliding table: 2000 x 270 mm - Rip length: 2000 mm - Max. saw blade diameter: 315 x 30 mm - Max. cutting height at 90°/45°: 100 / 80 mm - Cutting width at parallel fence: 1270 mm - Main saw blade speed: 4500 rpm - Scoring blade speed: 8500 rpm - Scoring blade diameter: 2-100 x 20 mm - Extraction port diameter: 100 mm - Motor power S1 100%: 3.8 kW Spindle Moulder: - Spindle diameter: 30 mm - Height adjustment: 100 mm - Table opening diameters: 80 / 100 / 140 / 190 mm - Clamping length of spindle: 100 mm - Max. tool diameter: - for profiling: 180 mm - for tenoning: 200 mm - Spindle speeds: 1800 / 3000 / 6000 / 9000 rpm - Motor power S1 100%: 2.8 kW - Voltage: 400 V - Dimensions: W=2000mm, D=3010mm, H=1250mm - Total weight: 400 kg Complete with: - Table widening on the right and fence bar can be folded down for space-saving storage - Robust and smooth parallel fence with quick locking - Tilting and height-adjustable saw blade with scoring unit - Cast iron table with rear and right extension and support foot - Extendable fence with folding stop - Roller on cross table simplifies workpiece positioning - Cutting width to the right of the saw blade up to 1330 mm - Equipped with high-quality two-piece scoring saw blade - High-quality spindle moulder fence with hold-down system and fine adjustment - 4 spindle speeds as standard - Electronic speed display via LED - Max. cutter diameter: 200 mm - Large, removable handwheel for spindle adjustment Hedpfx Abovz Hgzohjfc Scope of delivery: - 2-piece carbide-tipped scoring blade - Carbide-tipped saw blade 315 x 30 mm Z 40 - Mitre fence