Mesin pembengkok tabung

Gelber-Bieger S03-60

Kondisi: bekas, Tahun pembuatan: 1980, PIPE BENDING MACHINE LANG TYPE EL90 Kdjdpfx Agerq D N Ro Rji Ø 90

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 120 mm, diameter pembubutan: 1.550 mm, diameter pembubutan di atas alas geser: 1.550 mm, diameter pembubutan di atas carriage atas: 1.220 mm, panjang pembubutan: 6.000 mm, panjang total: 8.500 mm, lebar total: 1.600 mm, tinggi total: 1.600 mm, berat benda kerja (maks.): 15.000 kg, penjepit spindle: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the acceptance criteria of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul on order, delivery time 3.5 months from order placement Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post - Rear safety guard along the entire length of the machine - Frequency inverter incl. soft-start function and potentiometer for stepless speed control Kjdpjv Ab Dqjfx Ag Rodi

Kondisi: siap digunakan (bekas), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm, max. forming length: 3200 mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88 mm/s, bending speed: 1879.6 mm/s, bending angle range: 0°–180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm, weight: approx. 5300 kg. Kedpfxetia Hhj Ag Rjdi

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 Kodpebn Amfefx Ag Rjdi T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Kondisi: sangat baik (bekas), Motor-driven NC rotary table Infinitely variable rotary table (indexing 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Model: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Kdjdsfk R Tdjpfx Ag Rei Clamping slots: 7 units Slot size: 22 H7 mm Slot pitch: 160 mm Position measurement is performed via an ROD 250 rotary encoder. Condition: Very good (used) Optionally available with machine base (travel path = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization

Tahun pembuatan: 1999, Kondisi: bekas, KAPAZITÄT 2000 kg Kdjdpfewa I A Tex Ag Rji HUBHÖHE 4,7 m & 5 m ARM-LÄNGE 3,2 m 2 STÜCK

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. Ksdpovf E Avofx Ag Redi - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Tahun pembuatan: 1992, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: Div1, Demag KBK 1 column-mounted slewing crane NL 125KG with chain hoist Technical Specifications: Payload at full outreach: 125KG / 0.125t Height: approx. 3.5m Underside of jib: approx. 3m Jib outreach: approx. 4m Hook height: approx. 2.55m Total weight: approx. 450Kg Fitted either with steel or Demag chain hoist 125Kg, depending on stock Including pins, cable trolley, travelling gear, end cap, etc. Multiple cranes in stock Slewing range: 300°, 400V 16A connection Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, load capacities from 80 to 5000Kg, please enquire See pictures Kodpfxong H T Us Ag Rodi Shipping via freight forwarder or collection by appointment only

Kondisi: hampir baru (bekas), nomor mesin/kendaraan: DCMS, Tahun pembuatan: 2007, Demag Manulift chain hoist Lifting capacity: 125 kg Lifting height: 2.8 m Reeving: 1/1 Kdodog Stp Hepfx Ag Roi Lifting speed: stepless 0.15 - 30 m/min Version: equipped with suspension eye Used, in very good condition (fully inspected) (New price € 3,353) Multiple DCMS hoists available

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2004, CNC Rohrbiegemaschine / CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: Beckhoff CNC PC control Technical Specifications: Maximum tube diameter x wall thickness: 80 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube center: 25 mm Maximum bending radius to tube center: 240 + 50 mm Maximum bending angle: 180° Maximum tube feeding length: 1000 mm Bending direction: Right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube turning and reversing unit Ksdpexzubvjfx Ag Redi - Electric mandrel bending device - Pneumatic mandrel bar safety system - Beckhoff PC control - Automatic central block lubrication - Laser scanner, safety enclosure Machine needs repair: The planetary gearbox of the transport carriage is defective and needs replacement. Spare part costs according to quotation (excluding installation): - Planetary gearbox: EUR 1674 - Gearbox flange: EUR 1850 - Pinion: EUR 850 - Plus VAT Cheap sale in as-is condition. Immediate availability including free loading onto truck.