Mesin cuci bagian wastafel bertekanan tinggi

Glogar HP25

Tahun pembuatan: 2017, Kondisi: siap digunakan (bekas), - BEKAS - MESIN POTONG LASER FIBER UNTUK PIPA DENGAN SISTEM PEMUATAN/PEMBONGKARAN BAGIAN LINGKARAN MIN: ø 25 mm Nledpfxex E Eihe Adisd BAGIAN LINGKARAN MAKS: ø 355 mm BAGIAN KOTAK MAKS: 260 X 260 mm BAGIAN PERSEGI PANJANG MAKS: 300 X 200 mm BEBAN MAKSIMAL YANG DIIZINKAN: 100 Kg/m SUMBER: IPG YLS-4000 ; 4000 W UNIT KONTROL: SIEMENS 840D BERAT: 12.500 Kg CATATAN: PEMUATAN OTOMATIS 3-12,5 m; PEMBONGKARAN OTOMATIS 12,5 m; KEPALA POTONG 3D; SENSOR KAPASITIF; PENYESUAIAN OTOMATIS

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical details of the system: Nedpfepiarnox Adield - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) The crane is disassembled and available immediately. Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.

Kondisi: bekas, Tahun pembuatan: 2004, de23t01 Nsdpeywntyofx Adiold

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Bekas gergaji pita hidrolik otomatis untuk logam MEP SHARK 332 NC EVO Ukuran pisau: 3320x27x0,9 mm Sudut pemotongan: dari 45° hingga +60° Mode operasi: manual, semi-otomatis dinamis, semi-otomatis, otomatis Nljdpfx Aoul Svlodijd Kecepatan pemotongan: 15-100 m/menit (inverter) Kapasitas pemotongan: pada 0° - bulat 300 mm - persegi 260 mm - persegi panjang 330x260 mm Dimensi: 2600x2320x2000 mm Tahun pembuatan: 2011 Berat: 1050 kg Mesin telah sepenuhnya direkondisi dan diuji.

Kondisi: baru, Tahun pembuatan: 2026, Parts cleaning machine, spray cleaning system type L800FP Fully automatic hot water parts washer with basket drive via gear motor, housing made of stainless steel 1.4301, pipework and rotary basket made of zinc-plated steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Useful height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 120 liters Nlodpehl H Ubefx Adiod - Heating: electrically adjustable (ambient temperature – 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter protects pump Delivery: ex works, FCA

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, berat keseluruhan: 1.000 kg, tinggi total: 3.500 mm, kapasitas angkut: 2.500 kg, kedalaman tenggorokan: 5.000 mm, tinggi kerja: 3.000 mm, Tersertifikasi DGUV hingga: 06/2025, Perlengkapan: dokumentasi / manual, Pillar and Wall-Mounted Slewing Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several pillar- and wall-mounted slewing crane systems from the manufacturers Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems cover a load capacity range from approx. 50 kg up to 2,500 kg and are suitable for use in workshops, manufacturing plants, assembly stations, as well as in in-house logistics. Some systems are classic pillar slewing cranes with a single jib, while select models feature a double-jib configuration, enabling operation across two separate work areas. The cranes are equipped with electric chain hoists and trolleys, operated via pendant control systems. The systems can be purchased individually. Inspection by appointment is possible. Taucha Pillar Slewing Crane – 2,500 kg Capacity Heavy-duty pillar-mounted slewing crane with floor-mounted steel column and jib arm for industrial lifting and assembly operations. Taucha Pillar Slewing Crane – 2,000 kg Capacity Pillar slewing crane with swivel jib for material handling in production and assembly areas. Taucha Pillar Slewing Crane – 1,600 kg Capacity Industrial crane with pillar base and swiveling jib, suitable for medium to heavy loads. Taucha Pillar Slewing Crane – 1,250 kg Capacity Pillar slewing crane with jib arm and trolley for precise material movement. Taucha Pillar Slewing Crane – 1,000 kg Capacity Pillar slewing crane with electric chain hoist and swiveling jib for assembly workstations. Taucha / Liftket Pillar Slewing Crane – 1,000 kg Capacity Pillar slewing crane with Liftket electric chain hoist, suitable for industrial lifting applications. Taucha Pillar Slewing Crane – 800 kg Capacity Nlodsyt Hc Djpfx Adiod Pillar slewing crane with swiveling jib and trolley for workshop and production areas. Taucha Pillar Slewing Crane – 800 kg Capacity (Double Jib) Pillar slewing crane with two opposing jib arms, suitable for serving two workstations. Taucha / Liftket Pillar Slewing Crane – 500 kg Capacity Pillar slewing crane with electric chain hoist for lighter lifting operations. Liftket Pillar Slewing Crane – 500 kg Capacity Pillar slewing crane with Liftket chain hoist and swiveling jib. Demag Wall-Mounted Slewing Crane – Approx. 315 kg Capacity Wall-mounted slewing crane with Demag electric chain hoist, suitable for workplaces with limited space. Taucha Pillar Slewing Crane – 250 kg Capacity Compact pillar slewing crane for light loads. Taucha Pillar Slewing Crane CS KD 250-6 – 250 kg Capacity Pillar slewing crane with swiveling jib and electric chain hoist. Liftket Pillar Slewing Crane – 250 kg Capacity Pillar slewing crane with Liftket electric chain hoist for assembly applications. Taucha Pillar Slewing Crane – 200 kg Capacity Pillar slewing crane for light material movement. Taucha Pillar Slewing Crane – 125 kg Capacity Light-duty pillar slewing crane for smaller components and tools. Taucha Pillar Slewing Crane – 100 kg Capacity Compact workshop crane for light loads. Taucha Pillar Slewing Crane – 50 kg Capacity Very light slewing crane for minor lifting tasks.

Kondisi: baru, Tahun pembuatan: 2025, Dry rotary vane vacuum pump. Available in stock. Completely new pump. Comes with a 12-month warranty. Nominal flow rate: 25 m3/h at 50Hz. Ultimate vacuum: 150 mbar abs. Nlodpfx Adsftzpvsiod If you have any questions, please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 16.000 rpm, daya motor spindle: 5 W, jumlah spindel: 3, jumlah slot dalam magazin alat: 21, tegangan masuk: 380 V, 4 unit CNC Brother mod. S500X1/S700X1. Tahun pembuatan 2014 1 unit dengan 3 sumbu Nodpjyap R Dsfx Adisld 1 unit dengan 4 sumbu, dengan stasiun hidraulik, tanpa instalasi penyaringan uap 1 unit dengan 4 sumbu, dengan stasiun hidraulik, dengan instalasi penyaringan uap

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 14 h, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, lebar total: 1.500 mm, panjang total: 3.000 mm, tinggi total: 2.500 mm, tekanan: 2.800 batang, tekanan kerja: 2.800 batang, bahan bakar: diesel, berat keseluruhan: 3.000 kg, kecepatan rotasi (min.): 700 rpm, kecepatan rotasi (maks.): 1.500 rpm, panjang selang tekanan tinggi: 60.000 mm, tahun perombakan terakhir: 2025, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Full translation into English, context-adapted for technical buyers on industrial marketplaces: Bundle of 5 UHP water blasting units, including a large selection of spare parts and accessories as follows: 1 x High-pressure waterjet system powered by Deutz-MWM V-8 diesel engine. Continuously adjustable pressure from 0–1400 bar and 0–2800 bar, overflow/dump system, with interchangeable plunger kit as follows: - 1400 bar at 99 l/min - 2800 bar at 46 l/min The high-pressure head, sleeves, and valves remain the same for both 1400 and 2800 bar operations. Pressure changeover between 1400 and 2800 bar is achieved with a simple plunger exchange. This unit was built in 2013 and kept as a backup machine, however, it was only operated once for 14 hours at 2800 bar for a heat exchanger cleaning project. The UHP waterjet unit is mounted on a galvanized steel frame. The Deutz-MWM engine was purchased used with approx. 3,000 operating hours and equipped in 2013 with a new Jetech UHDW high-pressure pump. Included is a large quantity of accessories and spare parts, such as dump guns and foot valves, rotary joints, swivels, surface cleaners, rotating nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterjet system is also available, but powered by a Scania V-8 engine with 850 operating hours, max. 1400 bar / 99 l/min. This unit also has an interchangeable plunger kit for 1400 bar / 99 l/min and 2800 bar / 46 l/min. The unit is installed in a 20-foot container, equipped with an 800 l diesel tank, workbench, and vise. In addition, three more high-pressure waterjet systems with 110 kW each are available, two of which have interchangeable plunger kits for 1400 and 2800 bar operation. A third unit is a Kamat K11000 with 2800 bar operating pressure. Also available is a hydraulic heat exchanger cleaning system with a rotating lance, mounted on a scissor lift table, suitable for very large heat exchangers. Nlodpfx Ajxc E Tredied All equipment is for sale due to company closure on account of retirement. Buyer sought for the complete package — machines and all accessories. For export only.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, HD wash basin – HD brush wash basin The wash basin features an adjustable 60 bar high-pressure pump, enabling cleaning within an enclosed workspace. Cleaning is performed using an aqueous degreaser (10 kg supplied) at approximately 45°C. - Viewing window with integrated lighting - Media filtration via cartridge filter - Convenient operation via foot switch - Included turntable Technical data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump capacity: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank volume: 170 l - Heating capacity: 4,000 W Njdpfx Adohl If Njiold - Total power consumption: 8.0 kW - Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm