Perangkat pembersih bagian air panas

Glogar L102

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatic hot water parts washing machine with basket drive via geared motor, equipped with 2 stainless steel wash pumps (manufacturer: Lowara) and 2 circulating 3-sided spray systems. Complete system insulation included. - Basket diameter: 910 mm - Useful height: 520 mm - Max. loading weight: 200 kg Dodjc S Tlajpfx Adgeul - Spray pressure: 2x 3 bar - Tank capacity: 175 liters - Heating: electrically adjustable (ambient temperature to 90°C) - Machine dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm - Unladen weight: approx. 300 kg - Wash time timer freely adjustable (minutes and hours) The entire cleaning machine (internal parts and external cladding) is made of stainless steel 1.4301. Water circulation and loading basket made of stainless steel 1.4301. Insulation of the entire system (tank and cabin) in stainless steel 1.4301. Mechanical lid locking. Bath cover with fine filter (2,000 micron). 2 suction filters for pump protection. Operating hours counter. Steam extraction with condensate return. Oil skimmer for bath maintenance. Complete system insulation. The parts washing machine is as-new (test plant/technical center unit). OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Kondisi: sangat baik (bekas), Swing diameter over bed: 1000 mm Centre distance: 2000 mm Centre height: 500 mm Dsdpfewhkdcox Adgjul Swing diameter over cross slide: 700 mm Spindle bore: 128 mm Spindle speeds: 6.4–1,600 rpm SIEMENS 810 D CNC control Various accessories MARCELS MASCHINEN CH

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatic hot water parts washer with basket drive via geared motor, equipped with two stainless steel washing pumps (Lowara brand) and two rotating 3-sided spray systems. Complete unit insulation included. - Basket diameter: 910 mm - Useful height: 520 mm - Maximum load weight: 250 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (RT - 90°C) - Machine dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm - Empty weight: approx. 300 kg - Washing time can be freely set (minutes and hours) - Complete cleaning machine (interior and exterior paneling) made of stainless steel 1.4301 - Water circulation system and loading basket made of stainless steel 1.4301 Duedpfodz Dy Hjx Adgel - Insulation of the complete unit (tank and cabin) made of stainless steel 1.4301 - Mechanical lid locking mechanism - Bath cover with fine filter (2,000 micron) - 2 suction filters for pump protection - Operating hours counter - Steam extraction including condensate return - Parts washing device is in near-new condition (pilot/testing unit) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!! This offer is non-binding and subject to change. Modifications, errors, and prior sale expressly reserved.

Kondisi: baru, Tahun pembuatan: 2025, Ex-display unit available immediately: New Kaeser SK 25 T - 10 bar Screw Compressor with Integrated Refrigeration Dryer Pressure: 10 bar Rated power: 15 kW Free air delivery: 2.11 m³/min Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 h Attractive leasing options for new machines available through our partner bank. Visit our showroom. Dsdpodrc Txjfx Adgjul We always have a wide selection of new and used compressors in stock!

Kondisi: baru, Filter cloths for all types of filter presses, available in all sizes and qualities. Short delivery times—contact us for more information. Location: 58762 Altena. Dedpfx Adeg Azmmegjul

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Cleaning System Type W 60 C Machine body, internal pipework, control cabinet and washing basket made of stainless steel Combination unit - rotary table system with removable turning device and small parts basket - Basket diameter, rotary table washing basket: 600 mm - Usable interior height: 370 mm - Basket load, rotary table washing basket: 100 kg - Usable interior height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Mesh size: 12 mm - Basket load, small parts basket: 20 kg Fully stainless steel construction Pumps and external pipework/fittings Configured for operation with liquids up to a density of 1.3 via reinforced pump with frequency converter Dedpfxjq Ewgks Adgjul Chip/particle filter with bath cover plate Eco-rinse (loss rinse) for minimal water consumption Water supply via operator's mains with integrated machine-side hot water supply Hot air drying 1 x 4 kW Oil skimmer Drainage system/floor flushing with pump and stainless steel pipework

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel Dsdpfx Adsd Ab H Hsgjul • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: sangat baik (bekas), en Duedpfx Adsmn Rcqegel

Kondisi: bekas, Tahun pembuatan: 1955, Technical details: Swing diameter over bed: 420 mm Duedpfx Aeu Ix D Ajdgjl Swing diameter over support: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 rpm / 8 steps Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.3 x 0.9 x 1.3 m Equipment: Röhm 3-jaw chuck, Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slots for copying attachment Live center

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. Duedpfx Adsl Dw D Ejgol We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg