GM Gera ARCADE GEL3 RV1-186 / 95 - 16 Flaschenreinigungsmaschine (2005)

GM Gera Flaschenreinigungsmaschine

Kondisi: bekas, Tahun pembuatan: 2024, Overview This bottle cleaning machine was previously used in a brewery. Due to its low operating hours, the machine is in excellent, near-new condition. It was replaced because the previous owner wanted to run bottle formats that were incompatible with this model. All tanks and the machine housing are made of stainless steel. The machine has already been dismantled and is stored dry, making it easy to load and transport. It comes with a 12-month warranty. Technical specifications: - Capacity: 9,500 bottles/hour - Cell pitch: 95 mm - Bottles per row: 25 Ksdpfx Acsvrfivoijdn Dimensions & weights: - Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg - Ready to operate with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg Year of manufacture: 2024 Formats: 0.25 l, 0.33 l, 0.5 l, 0.75 l Machine details / features: - Steam heating - Pre-cleaning and residual liquid removal by pulsed rinsing before washing - CE certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-rinse - Rotating spray nozzles - Single-ended machine - Infeed/outfeed via finger conveyor - Bottle pockets made of plastic - Concentration measurement - Liquid NaOH supply - Spindles made of stainless steel - 24V control voltage - Siemens S7 control system - Complete stainless steel machine body - Steam extraction - Machine dismantled and ready for shipping - Automated machine start-up (heating, etc.)

Kondisi: bekas, Tahun pembuatan: 2022, de23070101 Kdsdeyk Ab Dspfx Acijn

Kondisi: bekas, Tahun pembuatan: 1999, Overview The bottle washing machine was previously used in a brewery. Thanks to a complete overhaul in 2005 and ongoing maintenance, the machine is in excellent condition. All tanks and the machine frame are made of stainless steel. The machine is already dismantled and stored dry, making it easy to load and transport. Technical Data: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per Row: 10 Dimensions & Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready to operate with additional components: 7,790 x 3,450 x 2,950 mm / 20,000 kg Year of Manufacture: 1999 Formats: 0.33 l, 0.5 l Machine Details / Features: Steam heated Pre-cleaning and removal of residual liquids via pulsed rinsing before washing CE-certified Chemical dosing pumps Machine data sheet included High-pressure pre-rinse Rotating spray nozzles Single-end machine Label ejection rear right Finger infeed/outfeed Bottle holders made of plastic Concentration measurement for NaOH storage liquid Spindles in stainless steel 24 Volt control voltage Siemens S7 control system Regularly maintained Kdjdpfxjwg E D Io Acijn Complete machine frame in stainless steel Exhaust air extraction Machine dismantled, ready for shipping Automated machine start (heating, etc.)

Kondisi: bekas, Tahun pembuatan: 2010, en-overview-this-bottle-washing-machine-arcade-gel-6-was-built-i n-2010-by-the-german-manufacturer-gm-gera-the-machine-is-still-in -operation-and-can-be-inspected-at-any-time-the-arcade-gel-6-is-f ully-functional-and-is-being-replaced-due-to-an-increase-in-produ ction-capacity-technical-details-nominal-capacity-33-000-bph-adju stable-range-13-200-36-300-bph-chain-pitch-169-mm-cell-pitch-110- mm-bottle-cells-per-row-30-units-total-bottle-cells-7-860-units-l oaded-bottle-cells-7-680-units-consumption-compressed-air-1-m-3-s team-operation-489-kg-h-steam-heating-4-430-kg-h-electrical-power -48-4-kw-water-7-35-m-3-h-tank-volumes-pre-soak-2-263-l-alkaline- pre-wash-7-240-l-alkaline-tank-1-31-755-l-alkaline-tank-2-350-l-h ot-water-tank-1-350-l-hot-water-tank-2-350-l-cold-water-350-l Kdsdpfx Acst Ul Exjijn

Kondisi: bekas, Tahun pembuatan: 1992, Storage cellar comprising 8 upright tanks with temperature control. Additional equipment: Refrigerated stainless steel tanks Ksdpfevcqthex Acijdn Features: 8 storage tanks (6 x approx. 16,500 l, 2 x approx. 17,500 l), temperature control system, control panel, blending manifold

Kondisi: bekas, Tahun pembuatan: 1993, summary The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. Due to a decline in sales volume, the brewery’s bottling has been relocated, making this bottling line available. Thanks to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are constructed from stainless steel. Spare parts, such as bottle cells, are still available. In 2018, the main drive shaft, motor, and gearbox (SEW) were overhauled, and the carrier chain was replaced in 2015. The machine is still assembled and can be demonstrated. Technical Data: - Capacity: 23,000 bottles/hour - Cell spacing: 85 mm - Bottles per row: 16 - Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives - Steam heating - Operator side: left - CE certified - Chemical dosing pumps Kedpsl Hx Adjfx Acisdn - Machine data sheet available - Fixed-pipe spraying controlled by machine cycle - Single-ended machine - Label discharge rear right - Finger discharge and finger infeed - Bottle discharge left - Bottle cells plastic - HMI Lauer - Caustic concentration measurement - 24 volt control voltage - S5 controller (conversion to S7 on request) - Regularly serviced - Water content in stainless steel - Steam extraction - Sample taps - KSB pumps in stainless steel - Insertable screens for baths - Water meter - Conductivity measurement by Endress - Additional equipment: spare parts included

Kondisi: bekas, Tahun pembuatan: 2002, Tangki CIP untuk air, alkali, asam, dan desinfektan. Mesin (tambahan): 4 tangki berdiri. Isi: tangki alkali 1270 l, tangki asam, tangki desinfektan. Material: stainless steel. Perlengkapan: tangki air – 870 l; tangki alkali – 1270 l; tangki asam – 1270 l; tangki desinfektan – 1270 l. Kdedoxbpibopfx Acisn

Kondisi: bekas, Tahun pembuatan: 1995, Overview This bottle washing machine was manufactured in 1995 by Swiss producer PAC. The machine has been removed from production and can be inspected in person at our warehouse. Technical Details Capacity: 6,000 bottles/hour Min/Max: 3,000 bottles/h - 6,300 bottles/h Bottle types: 0.5L, Euro, NRW, incl. change parts for 330ml Vichy bottles Bottles per row: 12 Bottles inside the machine: 1,080 Kdsdevl Huaopfx Acien Bottle cell carriers: 96 Dimensions: Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3.6 m³/h Heat consumption at 80°C: 480 kJ/h x 1000 Electrical consumption: 11 kW Includes spare parts: Motors for front and rear drive Bottle cell carriers Wear parts Machine body entirely made of stainless steel All hot zones with 5 cm insulation Belt for label removal Stainless steel heat exchanger for low-pressure steam 116°C-120°C at 0.7 – 1 bar Self-cleaning stainless steel spray pipes

Kondisi: bekas, Tahun pembuatan: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several renowned European manufacturers, including CIMEC (Italy). The main unit – a CIMEC 16-16-1 rinsing, filling, and capping monobloc – was built in 2014 and operated in a natural mineral water plant until July 2025. The line also includes additional equipment such as self-adhesive and wrap-around labelers, a DE filter, and a heat shrink tunnel for capsules, making it a fully functional and compact bottling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Kedsyb Tkdspfx Aciodn Technical Data  Years of manufacture: 2010-2014 Application: water and other beverages Output: approx. 2,000 bottles per hour (330 ml) approx. 1,670 bottles per hour (500 ml) Bottle formats: 250 ml – 1,000 ml (including: 330 ml & 500 ml) Closure type: 26 mm crown cap Configuration (monobloc): 16 rinsing heads 16 filling heads 1 capping head Scope of delivery Rinser / filler / crown capper monobloc | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown cap, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3,500 bph Wrap-around labeler | Identapply | Servo 125 RH | 2010 | with conveyor belts DE filter | Spadoni | – | 2011 | 80 hl/h Shrink tunnel for capsules | TOSA | TN1 | 2011 | for PVC capsules

Kondisi: bekas, Tahun pembuatan: 1999, Gebrauchte Füllmaschine Fimer 1999 Gebrauchte Füllmaschine für Wein in Korbflaschen, Hersteller Fimer, Modell RT 8/1 VA, Baujahr 1999. Die Maschine erreicht eine Leistung von 400 Korbflaschen pro Stunde im 5-Liter-Format und 200 Korbflaschen pro Stunde im 12-Liter-Format. Kdjdpfx Asvlnvlscion Die Drehrichtung ist im Uhrzeigersinn; die Maschine verfügt über 8 Ventile und arbeitet mit volumetrischer Abfüllung. Sie ist mit einem Standardauslaufhahn mit 20,5 mm Durchmesser ausgestattet sowie für 35 x 18 mm Aluminium-Schraubverschlüsse geeignet. Die Füllmaschine wird inklusive ihrer Sicherheitseinrichtungen sowie sämtlicher Dokumentation und Bedienungsanleitungen verkauft. Sie wurde konserviert eingelagert. Die Maschine befindet sich in gutem Zustand und wurde in den letzten Jahren für die Abfüllung von Wein in 12-Liter-Korbflaschen verwendet.