Karet alam Membran karet

Gmatick GmbH RM-2

Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, film storage paternosters, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top quality and suitable for every membrane press (for film and veneer pressing). You can purchase our membranes pre-cut to your required dimensions or as roll goods. SILICONE Type: MS-2 Color: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore/hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Color: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore/hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Color: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore/hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Color: grey/black Surface: both sides smooth Ppodped S Efajfx Abusl Standard width: 1700 mm Rubber: natural rubber Shore/hardness: approx. 42° / 60° Shore Thickness: 3.5 – 4 mm Operating temperature: max. 130°C Standard SILICONE Type: RSS Color: red-brown or transparent (other colors on request) Surface: both sides smooth Standard length: cut to size or 10 m roll (other lengths on request) Standard width: 1200 mm – up to 1800 mm on request Polymer: silicone Shore/hardness: 30° – 80° Shore Thickness: 0.5 – 10 mm

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING Ppjdpfx Asrmucxobusl PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: baru, Thread diameter M3 - M16 mm Continuously variable speed up to 187 rpm Working range 180 - 2000 mm Motor power 0.7 kW Electric tapping machines for threads M3 - M16, Adjustable angle. 9 quick-change chucks with slip clutch. Settings via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800 mm. Podpjfg U Sqjfx Abuepl Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, PELLET PRODUCTION PLANT 2 TON/H COMPLETE WITH BELT DRYER Ppodpfxew Ebx Sj Abujl

Kondisi: baru, Tahun pembuatan: 2025, Einstiegsmodell Faserlaser-Blechschneidemaschine Niedrige Laserschneidekosten und einfache Bedienung Der modulare Schneidtisch mit Versteifungen spart Zeit beim Zerlegen und verbessert Komfort und Steifigkeit. Die spezielle Faserlaserdüse und der Schneidprozess ermöglichen ein schnelleres Sauerstoffschneiden von Kohlenstoffstahl, gas- und kostensparendes Niederdruck-Stickstoffschneiden von Edelstahl sowie ein hochwertiges Luftschneiden bei Kohlenstoffstahl. Faserlaserschneidköpfe erkennen hervorstehende Hindernisse, um die Schadensrate effektiv zu senken und die Wartungskosten des Laserschneiders zu sparen. Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1000W, 1500W, 2000W, 3000W Schneidbereich: 4000 x 1524 mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Pedpfxshv U Sws Abuopl Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlung: Wasserkühlung

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor Podpfewrp Emjx Abuepl -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Kondisi: bekas, tinggi total: 1.600 mm, panjang total: 5.000 mm, lebar total: 1.600 mm, 2 Ppsdpfx Abjwnitijuel

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Ppjdpfx Abjv Uq Tlsuol Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WEMHÖNER VARIOPRESS Basic 1000 S Vacuum Membrane Press Psdpfev Np H Hsx Abujpl Technical Data: - Heating plate dimensions (mm): 2850 x 1550 - Electric heating plate configuration: Aluminum heating plate on top - Total pressing force (kN): 2400 - Maximum chamber pressure (bar): 6 - Maximum operating temperature: 180°C - Maximum batch or workpiece size (mm): approx. 2460 x 1180 - Thermoplastic film as roll material: film width approx. 1430 mm - Film thickness (mm): approx. 0.25 - 1 - Pressure chamber height (mm): up to max. 180 Connections: - Installed power (kW): approx. 46 - Required air pressure (bar): approx. 8

Kondisi: baru, Tahun pembuatan: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Ppodpfx Abeu Egp Isuel Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg