Gergaji panel

GMC MACCHINE SRL KGS 660S

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Oil Burner Weishaupt WM-L10 Year of manufacture: 2008 We speak Russian! Viewing strictly by prior telephone arrangement only! Preferred sale to dealers, businesses, or for export. All information provided without guarantee; subject to error and prior sale. Hfedpfx Agei Ap Ato Rjd The seller assumes no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Of course, we also handle all formalities. Loading possible.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. Hfjdpfx Aswrp Emeg Rod The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Hjdpfx Ajurwy Aog Rjfd

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Hsdpfx Asfxpbmsg Rofd

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Panjang potong efektif 5000 mm Hodpfx Aoyg Epvsg Rjfd Diameter pisau 550 mm Kemiringan kepala elektronik Kemiringan dalam/luar dari 22°30′ hingga 135° Probe pengukur

Kondisi: baru, Screw compressor with refrigerant dryer Belt-driven. Space-saving. Cost-effective. Easy operation thanks to Infologic² Basic control system. Efficient compression stage. Ideal solution for industrial and workshop applications. Impressive compressed air quality. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerant dryer: Integrated, refrigerant R513A Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor output; IP55: 7.5 kW Oil volume: 3.2 l Pressure dew point (refrigerant dryer, 20°C, 100% RH): approx. +3°C Hfsdpfxswm Ih Ao Ag Rsd Installation data: Ambient conditions min. / max.: 1 / 46°C ΔT above cooling medium temperature: 2°C Cooling air requirement: 756 m³/h Free fan pressure: 30 Pa Sound level: 68 dB(A) Voltage / Phases / Frequency: 400 / 3 / 50 V / Ph / Hz Refrigerant dryer power (230V/50Hz): 0.27 kW Dimensions and weight: Length x width x height: 1540 x 665 x 1350 mm Weight: 240 kg Compressed air outlet: G 1/2" internal thread Compressed air receiver capacity: 270 l INCLUDES OPTION: Aftercooler C43 MINI (minimizes condensate accumulation)

Kondisi: sangat baik (bekas), lebar total: 1.500 mm, panjang total: 3.000 mm, Press panel dalam kondisi kerja sangat baik + finger jointing Grecon Hfodjt Uduxepfx Ag Rod

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. Hfjdetvat Tspfx Ag Red This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, * wire spool platforms.

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Panel saw for plexiglass and wood panels with extraction unit Very good condition! Maximum cutting height: 2200 mm Maximum cutting length: 4200 mm Maximum cutting thickness: 60 mm Length: 5600 mm Depth: 1400 mm Height: 2900 mm Hfedpfxeinunqe Ag Red Weight: 850 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 15 t, lebar bal: 700 mm, tinggi bal: 700 mm, berat bal: 220 kg, tegangan masuk: 400 V, daya: 4 kW (5,44 hp), berat kosong: 2.700 kg, Manufacturer: Borg Baling Company Model: S-15KK Year of manufacture: 2002 3x400V, 4kW, 14.5A Pressing force: 15 t Net weight: 2.7 t Maximum bale dimensions: 700 x 700 x 1000 mm Hfsdpfxoh Dy Rfj Ag Rod Wide range of used machinery and industrial equipment available