Garis penyambungan kayu otomatis

GOMA FC10KZ6 PZ6/2

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Set for manufacturing micro-joint connections for large-scale and mass production Features: - High-performance production line - Heavy-duty working units - High feed rates - Accelerated manipulative movements result in top-level performance. Depending on the required output capacity, additional buffer conveyors are integrated into the line to further speed up the production process. TENONING MACHINE FC-10KZ-6 Specification Values Milling spindle 50 x 210 mm; 5500 rpm Spindle motor 18.5 kW Special chipper saw 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Package height 30 to 150 mm PRESS FC-10PZ6 Specification Values Board width/thickness 30–150 mm / 20–70 mm Finished board length 6000 mm Line capacity up to 15,000 linear meters/shift The machine has undergone the following upgrades and improvements: - new electrical installation - machine controller replaced with SIEMENS SIMATIC S7 with SIEMENS SIMATIC HMI panel - new infeed table before the tenoners with buffer - new board flipping mechanism – side feeder behind the tenoners (board flipping mechanism on a chain, inverter-controlled) - new chain conveyor before the press (length 4500 mm) - additionally, underscoring units for finger-joint gluing of furniture boards installed on the tenoners Machine dimensions: 16.5 m x 5 m Bjdpfx Ahox Idl Hjwecw

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm Bcjdpfxsw Sy T Hs Ahwew (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas), For sale: 1 roller conveyor, each including a geared motor. Technical data: Year of manufacture: 2011 Length: 12.75 m Bcodpfx Aheihpn Newjw Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details, see type plate image) Three out of four roller tracks are equipped with a wooden side wall along the entire length. One roller track has a wooden side wall for a length of 5.20 m. Two out of four roller tracks are each equipped with 3 lateral removal systems (see pictures).

Kondisi: bekas, Holzhacken von Rundholz: 100-150 m³/h Hacken von kleinen Resthölzern: 50-100 m³/h Gewicht: 3.165 kg Max. Stammdurchmesser: 254 mm Bcedpfx Aehclffehwow Söderhamn Eriksson 670-56 CC Hacker mit Elektromotor. Der Söderhamn Eriksson 670-56 Hacker ist zur Herstellung von Hackschnitzeln für die Zellstoff-, Faserplatten- und Spanplattenproduktion vorgesehen. Sowohl Rundholz als auch Sägewerksabfälle können als Rohmaterial verwendet werden. Der Einzug des Hackers 670-56 erfolgt horizontal, in einem Winkel von 37,5 Grad zur Holzfaser. Die hochwertigen, gleichmäßigen Hackschnitzel können wahlweise nach unten abgeführt oder direkt nach oben ausgeblasen werden. Werden auch Sie zu einem der Holzverarbeitungsbetriebe, die ihre verfügbaren Ressourcen effizient nutzen.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 990 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tinggi total: 3.900 mm, arus masuk: 63 A, panjang total: 9.500 mm, lebar total: 4.500 mm, daya: 15 kW (20,39 hp), Perlengkapan: dokumentasi / manual, Pelletizing plant suitable for a wide range of materials, including wood, miscanthus, agricultural by-products and waste (such as hay, straw, corn stover, etc.), as well as animal feed. This is a complete system assembled on a base frame, consisting of the following components: - Raw material storage bin (4m³) with agitator. This has been extended by approx. 3-4m³ using plywood panels - Intermediate auger to hammer mill - Hammer mill, 11kW, for shredding wood chips or other materials - Inclined mixer for homogenizing material, including moisture measurement, dosing, and level monitoring - Metering hopper for pressing aids feeds into inclined mixer - Dosing screw for optimal press feed (speed controlled) - Pellet press, 15kW, incl. full indicator, temperature monitoring, and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 meters height Bedpfxoxv Dkce Ahwocw The system is designed so that a second 15kW press can be easily added. Entire plant is centrally operated via Siemens PLC (touch display). All parameters are monitored so that the press shuts down automatically in case of a malfunction! Remote operation and monitoring via PC is also possible. The chip dryer shown on photo 2 (mounted on the wall with discharge and control system) can also be purchased. Please contact us for details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw Bsdpfx Ahowclkyjwocw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm Bcsdpfjvu Hfqsx Ahwsw > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: sangat baik (bekas), Multiple underground 150 m³ steel storage tanks (firefighting water tanks) Capacity: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted according to DIN 14230 for use as underground firefighting water tanks: The tank features a firefighting water suction connection in accordance with DIN 14244, equipped with a permanently mounted A-type fire brigade coupling per DIN 14319, design type B, without dip tube. In addition, the tank is fitted with a ventilation flange/stub connection NW/DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank is empty, cleaned, and has been factory-coated externally with bitumen. - On request, we can supply the tank with a full internal bitumen-based lining (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. Bcedpfxjfnh Tgs Ahwow An inspection is possible at any time by prior appointment. If you need further information, feel free to call us or send us an email at b.barth (at) barth-tank.de

Kondisi: bekas, Tahun pembuatan: 2000, unimat23e_spec Bcodjwztw Sjpfx Ahwow

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 30.200 l, tinggi total: 6.000 mm, diameter dalam: 2.800 mm, berat keseluruhan: 1.400 kg, TECHNICAL SPECIFICATIONS - Flat-bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 liters - Material: Stainless steel 316 L - Internal finish: cold-rolled - External finish: cold-rolled - Temperature-controlled ROOF - Conical - 1 eccentric chimney at front, Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting lugs RING - 1 oval manhole 310×420 mm - 1 partial discharge valve DN 65 - 1 connection for level probe BOTTOM - 2% sloped plate with Boitard - 1 full-discharge valve with sealing cap ADDITIONAL INFORMATION Bodpfx Ajv I A Nlohwecw - Tank compatible and suitable for liquid fertilizer storage - 6-month warranty - Conforms to CE standards