Beralih tekan - kolom ganda

GRAEBENER multi-station press GKN 400/1000/450

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended Cedpod Ab H Hofx Abhjpu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. daylight between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2x 41,330 kg Max. total mould weight: 62,000 kg Cedpow Aw Taefx Abhjpu Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and Cooling: Installed power of main drives: 265 kW Hydraulic tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated from the machine control panel Machine in excellent technical condition – latest generation of ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, white goods, technical applications). The machine remains powered and can be tested on site. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operational videos, technical documentation, and arrange a convenient viewing time.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 35.000 kg, gaya penekanan: 250 t, jenis arus masuk: tiga fasa, daya: 30 kW (40,79 hp), gaya punching: 250 t, tegangan masuk: 200 V, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Cpodju Dxb Tjpfx Abheu Year of Manufacture: approx. 1991 Stroke Length: 170 mm Shut Height Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Power: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dispensing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), - GEBRAUCHT - FASERLASERSCHNEIDMASCHINE MIT PALETTENWECHSLER X-ACHSEN-WEG: 3048 mm Y-ACHSEN-WEG: 1524 mm Cpjdpovghb Defx Abhju Z-ACHSEN-WEG: 150 mm EILGÄNGE X-Y-Z: 100 - 100 m/min ARBEITSBEREICH: 3000 x 1500 x 150 mm LASERQUELLE: IPG Faser 4000 ; 4000 W STEUERUNG: PRIMACH 30L GEWICHT: 10.000 kg ABMESSUNGEN: 10.500 x 3.400 x 2.200 mm

Kondisi: bekas, Tahun pembuatan: 2004, en_VErnGNwKJDgr1wSjQd5yMZ Codsv Svarepfx Abhjpu

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Pelat tipe tersedia, 100,000-litre tank, used, double-walled, in good condition, immediately ready for operation, cleaned – certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m (transport height) Csdpfxsuzvyuo Abhjpu - Access ladder - Platform with railing - Permanently welded saddle supports - Ventilation - Overfill prevention device - Dipstick - Leak detector Loading and transportation can be offered. Only serious and legitimate enquiries stating: Name, email address and telephone number will be answered.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 300 mm, panjang pemotongan (maks.): 300 mm, ketinggian potong (maks.): 508 mm, Perlengkapan: dokumentasi / manual, Horizon trilateral model HT 70 lengkap dengan manual dan aksesori. 2 set pisau. Cpsdpfxsxcupij Abhsu

Kondisi: siap digunakan (bekas), Presa de debavurat Erfurt PKZe 500/1000 Forță: 500 t Dimensiuni masă: 1020x1420 mm Codpfx Aovbcxtebhjpu Cursă: 400 mm Număr de curse/minut: 12 Motor principal: 41 kW Video disponibil

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Stroke Rate: 55 strokes/min (adjustable) * Distance between table and ram: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipped in accordance with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bushings, quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed gearbox with helical gearing in oil bath Cjdenyh Sispfx Abhjpu * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * Six-point ram guidance with used oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted as standard after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejectors (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler, coil reel, straightener, pneumatic or servo feed unit) * Custom-built machine

Tahun pembuatan: 2023, Kondisi: baru, Control system with motor for all legacy NC feeds. Replacement for Alba, Schleicher, Dreher, PA, etc. Torque range: 6–90 Nm. Complete price starting from €3,900 for Alba stepper motors, from €5,900 for servo drives. Can be installed by any qualified electrician. Cpedecn Du Ijpfx Abheu