Beli press tuas lutut bekas (40)

Kondisi: bekas, Tahun pembuatan: 1988, Pressure: 100 t Distance between uprights: 1180 mm Stroke: 3 - 120 mm Strokes per minute: 95 /min Distance table/ram, ram up: 500 mm Table surface: 1100 x 700 mm Pass-through opening in table: 220 x 100 mm Table height above floor: 800 mm Side frame clearance: 400 mm Ram surface: 750 x 350 mm Ram adjustment: 100 mm Oil capacity: 1300 l Iedpsvut Tzsfx Aa Njtb Drive power: 42.0 kW Weight: 10.0 t Space requirement (W x D x H): 1.8 x 1.8 x 3.55 m Approved for manual part loading in accordance with German accident prevention regulations (UVV) with hydraulically driven knee lever system, pressure- and stroke-dependent control, two-hand operation with electro-hydraulic roller feed no foundation pit required Additional option: Fecker decoiler (price on request) Can be offered with or without commissioning – video available from seller prior to dismantling

Kondisi: sangat baik (bekas), gaya penekanan: 5 t, I am selling a Schling DUO 5T pneumatic press. Itsdpsudph Ujfx Aa Nsb

Kondisi: bekas, Tahun pembuatan: 1994, Tekanan 600 t Langkah 100 mm Jumlah langkah 45 /menit Jarak antar tiang 580 mm Tinggi pemasangan 460 mm Iedpjw U Ekpefx Aa Njtb Luas meja 550 x 620 mm Luas pelat tekan 550 x 430 mm Penyesuaian pelat tekan 50 mm Daya penggerak 15,0 kW Berat 13,5 t Ruang yang dibutuhkan (PxlxT) 1,5 x 2,45 x 2,75 m Jarak gaya nominal 1,7 mm Energi nominal 10,2 kJ dengan penggerak engkol, rem roda gila, kopling hidrolik, penyeimbangan rangka, kontrol dengan pengawasan mandiri

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 - 42 /min Distance table/ram, large stroke at top, adjustment at top: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral clearance between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 - 250 mm Programmable slide travel per guide: 0 - 140 mm Transfer device stroke rate: 42 /min Drive power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking, tool clamping system for table and ram, motorized central lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 Iedpfxevuukuj Aa Nstb - Cleaning system (manufacturer Beyss, year 1989) as is and lies, WITHOUT commissioning, disassembled and stored The press was installed in a soundproof cabin by the previous owner, which is not included in the scope of delivery Video of the machine prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force 400 t Upright distance 1,100 mm Stroke 250 mm Stroke rate 25 – 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table area 1,100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ijdpfovuuknox Aa Notb Ejector force in ram 3 t Ejector stroke in ram 60 / 70 mm Ram area 980 x 800 mm Lateral frame passage 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (W x D x H) 3.5 x 3.3 x 6.0 m Control cabinet weight 1.4 t Control cabinet space requirement (W x D x H) 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with toggle drive featuring steplessly adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorised ram adjustment, pneumatic compensating cylinder in the press frame, cam-controlled ejector in the table (30 t / 80 mm), pneumatic ejector in the ram (3 t, 60 mm), motorised central lubrication Can be offered either without commissioning or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1988, druck-100t-de-specs Itjdpfx Aevzxtaja Neb

Kondisi: bekas, Tahun pembuatan: 2012, druck-260-t-presse-technische-daten Ijdpfx Aevuuk Iea Nstb

Kondisi: bekas, Tahun pembuatan: 1977, Pressure 30 t Outreach 110 mm Stroke 50 mm Stroke rate 35–80 /min Clearance between side frames 170 mm Installation height 230 mm Table surface 410 x 260 mm Table height above floor 790 mm Ram surface 190 mm Ram adjustment 35 mm Drive power 1.0 x 1.1 x 1.8 kW Weight 1.3 t Approved only for use with safe tooling or fixed guarding in accordance with German accident prevention regulations (UVV) Itsdpfxjvuugps Aa Nob Equipped with motor-driven knuckle-joint system, pneumatic friction disc clutch and brake, manual ram adjustment, mechanical ejector in table, fixed table, automatic centralized oil lubrication, foot pedal operation as it stands and lies, WITHOUT commissioning – Video of machine in operation available from the seller prior to dismantling

Kondisi: bekas, Tahun pembuatan: 2003, Pressing force 400 t Frame gap 1060 mm Stroke 450 mm Strokes per minute 15 - 30 Distance table/ram, max stroke up, adjustment up: 1160 mm Table area 1000 x 700 mm Ejector force in table 2 x 16 t Ejector stroke in table 125 mm Cushion force in table 120 t Cushion stroke in table 2 mm Ejector force in ram 2 x 4 t Ejector stroke in ram 100 mm Ram area 1000 x 700 mm Lateral frame passage 630 mm Drive power 55.0 kW Weight 50.0 t Year of manufacture 1986 - Overhauled 2003 Ijdpfx Asvzxpuoa Netb Multi-stage press with automatic parts feed, transfer system, cushion in table (2nd stage) as is, stored disassembled, WITHOUT commissioning

Kondisi: bekas, 100 t pressing force Clearance between uprights: 310 mm Stroke rate: 80 strokes/min Ram adjustment: 40 mm Table size: 400 x 300 mm Ram surface: 250 x 190 mm Table height: 960 mm Ram bore diameter: 35 mm Machine weight approx. 1.5 t Space requirement approx. W x D x H 1500 x 1500 x 2200 mm Iedslp U Sdspfx Aa Nstb Centralized oil lubrication Press force monitoring Mechanical feed Machine number: 1111

Tahun pembuatan: 2000, Kondisi: baik (bekas), 5 units in stock. Price applies to 1 unit. Toggle press, make: SCHMIDT, pressing force: 3 kN. Itodpoiduvgefx Aa Nob

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Knee lever press Schling Gaya tekan 60 kN (6000 kg) Langkah dapat diatur dari 0–25 mm Sangat bersih dan dalam kondisi sangat baik Itodpfxox Hk Dyo Aa Nsb Selain itu tersedia: Pneumatic press Benzing (bagian dari Mäder Pressen) Langkah dapat diatur dari 0–60 mm Gaya tekan 4,50 kN (450 kg) Kondisi bersih dan terawat

Kondisi: bekas, Tahun pembuatan: 1981, barnaul-1000t-press-de Itedpfxex Da Aqo Aa Nob

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 80 mm, lebar total: 100 mm, panjang total: 220 mm, penyesuaian silinder hidrolik: 77 mm, lebar meja: 100 mm, panjang meja: 160 mm, tinggi pemasangan: 140 mm, berat keseluruhan: 17 kg, persyaratan ruang panjang: 220 mm, lebar yang dibutuhkan: 100 mm, panjang langkah: 25 mm, Press tuas lutut / press tangan dengan ram persegi Merek: Steinel Tipe / Nomor mesin: PHK 8 Ijdpjxyw A Hefx Aa Nstb Tekanan: 6 kN Ukuran meja: 100 x 160 mm Jangkauan: 80 mm Langkah: 25 mm Tinggi pemasangan: 63–140 mm Penyesuaian tinggi: 77 mm Lubang ram: Ø 10 mm Berat mesin: 17 kg Kebutuhan ruang: 100 x 220 x 600 mm

Kondisi: bekas, Press engsel A.COLOMBO 1600 ton Produsen: Agostino Colombo Model: G 1600 Kapasitas nominal: 1600 ton Ukuran meja: 1060 x 900 mm Langkah: 135 mm Tinggi shut: 635 mm Penyesuaian ram: 20 mm Bukaan samping: 400 mm Iodpfx Aaexbtbzs Notb Motor: 45 HP

Kondisi: bekas, Kapasitas: 2000 ton, Langkah: 140 mm, Tinggi mati: 510 mm, Isdpfxjxy Rvts Aa Netb Penyesuaian ram: 25 mm,

Kondisi: bekas, de-barnaul-1000t-press Isdpfx Ajxqq E Aoa Njtb

Kondisi: bekas, Dijual Knuckle-joint press VORONEZH 2500 ton. Mesin dalam kondisi kerja baik. Produsen: VORONEZH TMP. Tahun: 1984. Model dan konfigurasi: KB8044 (504.003.844) / 2500 ton. Gaya nominal: 2500 ton. Langkah ram: 190 mm. Frekuensi langkah: 14–20 kali per menit. Tinggi penutupan: 560 mm. Penyesuaian ram: 15 mm. Dimensi meja: 1530 x 1530 mm. Motor utama: 77 kW, 380 V. Dimensi keseluruhan: 4920 x 3340 x 5980 mm. Berat: 125 ton. Itedpfexbtcljx Aa Njb

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Produsen: Woronez TMP Tahun: 1992 Model dan konfigurasi: KB8044 / 2500 ton Gaya nominal: 2500 ton Langkah peluncur: 190 mm Jumlah pukulan: 14-20 Tinggi cetakan tertutup: 560 mm Pengaturan peluncur: 15 Dimensi meja: 1530 x 1530 mm Jarak antara tiang: 1600 mm Iedpfxoxlh Tte Aa Notb Motor utama: 77 kW, 380 V Dimensi keseluruhan: 4920 x 3340 x 5980 mm Berat: 125 ton.

Kondisi: bekas, Pressing force: 1.2 kg Itjdpfxedbmpms Aa Neb Table size: 110 x 150 mm Table through hole: 20 mm Throat depth: 86 mm Max. distance between table and ram: 80/210 mm Ram stroke: 30 mm Required space: 240 x 150 x 510 mm Weight: 21 kg

Tahun pembuatan: 1993, Kondisi: bekas, nomor mesin/kendaraan: P 285, Thrust force: 800 kN Table size: 600 x 900 mm Iodpfxj N D Ano Aa Njtb Required space: 1150 x 1900 x 2700 mm Weight: 6000 kg

Kondisi: bekas, Single Column Toggle Press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric Toggle Press, Eccentric Press Year of construction approx. 1984 Pressing force: 60 tons Throat depth: 160 mm Table size: 580 x 360 mm Ram area: Ø 270 mm Clamping pin bore: Ø 40 mm Itedpfev Uraaox Aa Njb Distance between uprights: 218 mm Ram stroke: 60 mm Ejector stroke: 15 mm Ram adjustment: 30 mm Max. installation height: 300 mm (with intermediate bolster) Strokes per minute: 70 spm Motor speed: 1400 rpm Motor power: 3 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Intermediate bolster L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejection mechanism integrated in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety guard, UNIDOR safety enclosure with pneumatic front shield - Cam switching unit BALLUFF Required space L x W x H: 1400 x 1200 x 1850 mm Weight: 3 tons In good condition

Kondisi: baru, Pressure: 8.0 kN Stroke: 40 mm Throat depth: 90 mm Working height, min – max: 50 – 200 mm Table size: 120 x 160 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 410 mm Toggle Lever Hand Press with Precision Height Adjustment SPECIAL PRICE!!! Itjdpfx Aaefv Avkj Njb • Adjustable working height by simply loosening the clamping screws on the column • Fine height adjustment (model HK 800): precise, millimeter-accurate positioning of the press head to the desired working height. Fine adjustment is mechanically driven in both directions via a threaded spindle • Ergonomically positioned hand lever, spring-assisted return

Kondisi: baru, Pressing force: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height: 80 - 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses Itodpfx Ajfv Avyoa Nsb including fine adjustment of working height via bevel gear and side hand crank, comfortable and easily adjustable. Toggle lever pneumatic presses are used when maximum press force is required shortly before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Kondisi: baru, Pressure 1.5 kN Stroke 40 mm Throat depth 70 mm Itodpfx Aasfv Av Dj Nsb Working height from 75 to 170 mm Table surface 115 x 70 mm Machine weight approx. 11 kg Dimensions (L x W x H) 115 x 175 x 290 mm Rack and Pinion Hand Press HZ 150 Force transmission is achieved via a rack-and-pinion mechanism. This press is used where a constant pressure is required during operation. Manufactured with precision, spindle hardened and ground, unlimited service life Long spindle guidance ensures optimal pressing performance Central T-slot milled to DIN 650, T-slot nuts fit precisely.