Pemisah pendingin

GRAFS PS+MS

The MS+PS Coolant Separator by GRAFS is a device that combines the functions of both a magnetic separator and a nonwoven filter separator. This combination enables an exceptionally high level of coolant purification, which is vital in metal cutting processes.

Rodpfx Aajvtp Ewo Doch
The MS+PS separator is the ideal solution for machines that require very clean coolant, where both magnetic and non-magnetic particles are present. By integrating magnetic filtration technology with nonwoven media filtration, this device ensures top-tier purification with minimal energy consumption.

DEVICE OPERATION:
1. Initial Stage (Magnetic Separator MS):
- First, the coolant containing metal shavings and other magnetic contaminants passes through the MS magnetic separator.
- This separator features a rotating magnetic drum, which attracts and retains magnetic contaminants on its surface.
- The coolant, cleansed of metallic particles, continues its flow, while the contaminants are wiped off the drum surface by a dedicated scraper.

2. Main Stage (Nonwoven Filter Separator PS):
- The coolant then flows through the PS nonwoven filter separator, where it is filtered through a specialised nonwoven fabric.
- This media captures fine particles, such as grinding dust or other impurities. An additional filter cake forms on the fabric, increasing filtration efficiency.
- When collected contaminants reach the maximum permissible level, a float switch advances the nonwoven media, winding the used material onto a roller, and fresh, clean fabric replaces it.

The process is fully automatic.

The separator is ideally suited for:
- Lathes
- Milling machines
- Grinders

Technical specifications:
Separator motor power: 0.09 kW, 900 RPM + i80 gearbox (Connection cable included)
Coolant pump motor power: 0.09 kW
Filter throughput: up to 100 L/min
Coolant pump capacity: 60 L/min
Tank volume: 150 L
Separator drum diameter: 110 mm
Drum rotational speed: 3 RPM
Set weight with pallet: 150 kg
Dimensions: 1000 mm x 900 mm x 650 mm
MS separator body material: Stainless steel, 10 mm thick base and 5 mm walls
Drum: Stainless steel tube with five neodymium magnets inside
Optional nonwoven media: Viscose, polyester, or polypropylene; basis weight from 18 to 110 g/m2

The separator is equipped with a robust, mobile tank with baffles, designed to maximise coolant dwell time. The tank is welded, made of steel, and powder-coated for protection.

Grafs is a leading Polish manufacturer of industrial knife grinding machines.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.