Tangki fermentasi dan penyimpanan silinder-kerucut (ZKG) [4 buah]

GROSS Behälterbau GmbH

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Machine (additional): Compact brew block with hot water tank Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / control: control cabinet with PLC and touchscreen Hedpjw Tbmdefx Aa Nong Material: stainless steel 1.4301 (AISI 304) Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Tersedia sistem reverse osmosis dua tahap lengkap dengan alat pelembut dari Eurowater. 1) Sistem reverse osmosis dua tahap Eurowater DPRO B1-2/2, tahun pembuatan: 2013, kapasitas aliran maksimum: 1,08 m³/jam, pipa tekanan: stainless steel, sistem pipa: PVC, diameter membran: 4 inci, dimensi mesin P/L/T: sekitar 730 mm / 700 mm / 2000 mm. 2) Alat pelembut Eurowater SM 42-F, tahun pembuatan: 2015, dimensi mesin P/L/T: sekitar 1000 mm / 500 mm / 1650 mm. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Hnjdpfxjw Ryu Us Aa Neg

Kondisi: bekas, Tahun pembuatan: 2018, Overview The filler and capper was originally manufactured by Stork and was overhauled in 2018 by ROBAK. The machine is suitable for filling still beverages into glass bottles. It is in very good condition, currently being dismantled, and stored in a well-maintained environment. Technical Data • Capacity: 7,000 bottles/hour • Filler is set up for 700 ml bottles Hnjdpfx Aaemnkhfj Nog • 31.5 mm aluminium closure The machine is missing a cap orienter and a cap chute/feeder. These should be custom-made for the specific cap to be used.

Kondisi: baik (bekas), Filtration system, manufacturer Seitz Orion, 100 x 100, for 180 hl/h, factory-refurbished in 2002, consisting of: - Kieselguhr frame filter with 29 stainless steel filter frames, external riser pipes, sight glass fittings with pressure gauge, kieselguhr discharge trough with stainless steel screw conveyor, and kieselguhr dosing device - Sheet filter with 150 stainless steel plates, external riser pipes, sight glass fittings with pressure gauge Hnodpjrai N Asfx Aa Njg - Operator platform between both filters, steps at the kieselguhr filter - Control cabinet

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, For the gentle preservation of liquid foods, with or without carbonation, in pre-filled bottles. Depending on the bottle shape, throughput of 60–120 l/h is possible; regulation either by desired product temperature or via timer. Gas-spring-assisted vat cover, fully insulated, equipped with castors and storage compartment. Suitable for a wide range of bottle shapes (milk bottles, beer bottles, preserving jars, etc.), dry-run protection, heating-up phase approx. 1 hour (from 20° to 90°C). Standard version includes perforated tray bottom, holding time adjustable (0–99 min). Technical Data: Water capacity: approx. 115 l Weight: 143 kg (empty weight) Height: 1,090 mm (working height) Width: 705 mm Length: 1,080 mm Electrical protection: 16 A Electrical connection: 400 V, 50 Hz (3-phase) Electrical power: 9.15 kW Hnsdpfx Aastpg Dmj Njg Nominal output: up to 120 l/h

Kondisi: sangat baik (bekas), Zweikammer-Edelstahltank 66 m³ (40 + 26 m³) ABMESSUNGEN: - Durchmesser: 3.245 mm - Höhe: 13.053 mm Baujahr: 2006 Hodpfx Aovlpctea Neng Gewicht: 4.680 kg Oberer Teil: 40° Boden Unterer Teil: 2% Boden Oben: DN 600 Mannloch mit Klappdeckel Edelstahl Druck-Vakuum-Ventil Unten: DN 400 Mannloch mit Klappdeckel Edelstahl Druck-Vakuum-Ventil Oberer Tank: Heizung mit 6 Heizschlangen, Wärmeaustauschfläche 6,95 m², Betriebsdruck 2 bar Oben zusätzlich 2 Heizschlangen, Wärmeaustauschfläche 2,33 m², Betriebsdruck 2 bar Gerät zum Tresterumrühren, Probeventil Unterer Tank: Heizung mit 4 Heizschlangen, Wärmeaustauschfläche 4,64 m², Betriebsdruck 2 bar Oben zusätzlich 2 Heizschlangen, Wärmeaustauschfläche 2,33 m², Betriebsdruck 2 bar Füllstandsanzeige Rechteckmannloch 555 x 432 mm DN70 Kugelhahn Die Tanks wurden in der Weinindustrie eingesetzt. Es liegt eine technische Zeichnung der Tanks vor. Die Tanks sind demontiert und sofort lieferbar.

Kondisi: bekas, Tahun pembuatan: 2009, 7 standing indoor fermentation tanks Machine (add-on): standing, coolable tanks made of stainless steel Max. capacity: 2500 l Max. pressure: 1 bar Max. temp.: 50 °C Width: 1366 mm Height: 3820 mm Material: Stainless steel 1.4301 Hedpfx Aexbn Nasa Neng Orientation / position: standing cylindroconical tank Base construction: on tubular legs with dished ends Equipment: with cooling, insulation and stainless steel cladding, manway in the shell, sampler, tank top fittings, venting device, conical bottom with central outlet Weight: 800 kg

Kondisi: bekas, Tahun pembuatan: 2006, de Hnodpfsvgvfkox Aa Njg

Kondisi: bekas, Technical details: Container capacity: - l Voltage: 230 / 50 V / Hz Approximate machine weight: System is dismantled kg Hnjdju Nw Hlopfx Aa Neg REVERSE OSMOSIS SYSTEM This unit is dismantled. Offered at the stated sale price as is and as described.

Kondisi: baik (bekas), AH-10282-Horizontal-Tank3500L Udvendige mål: B 1850 mm x L 2300 mm x H 2100 mm. Isolerede rustfri ståltanke – 2 stk. Identiske. 3” udløb. Hjdpfx Aajikfm Ne Njng Varierende indløb. Manddæksel foran, Ø400 mm. AISI 304.