Rak barang panjang

GUSTOS D-5-3000-S

Kondisi: bekas, Module milling cutter Module 8 20 degrees Length 1800 mm Bdjdpedklt Nefx Ad Ref Diameter 120 mm Bore 40 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. Bodpfx Aeh Ek Daed Rjdf The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 40.255 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in traveling column design. The machine was built in 2008 and underwent a full retrofit in 2022 with modernization to Siemens Sinumerik 840D Solution Line. Equipped with a 5-axis simultaneous operation license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel, and electronic handwheel. Technical Data: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Machine type: 5-axis universal machining center / traveling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Full retrofit: Siemens CNC / Drive upgrade 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 – 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V On hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Control panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: 5-axis simultaneous operation license Bdodoyuzg Hspfx Ad Rof Axis licenses Operator software license Equipment: Integrated swivel table / swivel bridge design Paper band filtration unit Coolant / filter unit Control cabinet Full enclosure Work area lighting Siemens operator panel Condition: Machine in well-maintained condition Upgraded Siemens control and drive technology 5-axis simultaneous operation available

Kondisi: sangat baik (bekas), Focker Strähler Welding Positioner, 8 Tonnes - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Speed range: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted, center): 1,170 mm - Height (horizontal): 1,400 mm Bsdpfx Aef Ezdnjd Redf - Length: 2,400 mm - Width: 1,500 mm Condition: Visually and technically excellent, runs very quietly

Kondisi: baru, Rack load capacity 42,000 kg Bdodpfefgyhdex Ad Rjf Load capacity per level 3,000 kg Number of load levels 2 x 7 units Recommended material length 6,000 mm Upright distance 3,000 mm Rack height 2,440 mm Dimensions L x W x H m The most suitable solution for storing long materials with 3 columns. - Each compartment can be swivelled outwards, making loading and unloading with an overhead crane always possible. - Double-sided design.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 800 kg, lebar total: 600 mm, panjang total: 820 mm, tinggi total: 1.600 mm, tegangan masuk: 400 V, Used Liebert NX 40 kVA / 32 kW 3-phase UPS battery backup system (tested and with good batteries) Rated power: 0.8 PF: 40 kVA Output power: 32 kW Battery Battery type: VRLA 40x YUASA NPL24-12 | 12 V 24 Ah Width mm: 600 Depth mm: 825 Height mm: 1600 Weight (approx.) without battery: 341 kg Input parameters Rectifier type: IGBT-based vector-controlled PFC (power factor corrected) Input voltage to rectifier Vac: 380 / 400 / 415 (400 V nominal), 3-phase, 3-wire Input voltage to bypass Vac: 380 / 400 / 415 (400 V nominal), 3-phase, 4-wire (Ph+N) Permissible input voltage range for rectifier Vac: 305 to 477 Input frequency Hz: 50 or 60 Permissible input frequency range for rectifier Hz: 40 to 70 Input current THD at nominal voltage: < 3%* without filter Input power factor at nominal voltage: ≥ 0.99* without filter Flexi Power Walk-In seconds: 5 to 30 (selectable) Output parameters Inverter type: IGBT-based, vector, repetitive and PI-controlled Bdodot H Irlepfx Ad Ref Output power kW: 24 / 32 / 48 / 64 Output voltage Vac: 380 / 400 / 415 (400 V nominal), 3-phase, 4-wire (Ph+N) Output voltage regulation: +/- 0.5% (3-phase RMS average) Output frequency Hz: 50 or 60 Output frequency regulation: +/- 0.05% Output voltage THD at nominal voltage: max. 1% Capability to handle high crest factor loads: 3:1 (in accordance with IEC 62040-3) Capability for step load handling: 0-100 or 100-0 Transient recovery ms: < 0.5 (recovery to 95% voltage level); 10 (recovery to 99% voltage level)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 69.000 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, jumlah slot dalam magazin alat: 40, produsen pengendali: Siemens, tinggi total: 2.800 mm, panjang total: 7.000 mm, lebar total: 4.000 mm, berat keseluruhan: 10.000 kg, panjang meja: 800 mm, lebar meja: 630 mm, model controller: Sinumerik 840D powerline, pasokan pendingin: 40 batang, daya nominal (semu): 69 kVA, pergerakan cepat sumbu Z: 50 m/menit, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, hidung spindel: HSK63, kecepatan spindel (maks.): 12.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 800 kg, jam operasional spindle: 27.000 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG MORI DMC 80U Tahun pembuatan: 2002 Jam operasional: 69.000 jam Jam spindle: 27.000 jam Perlengkapan: 5 sumbu Kepala berputar Bdjdpfx Adev Eurmo Rsf Pengukuran posisi langsung X/Y/Z (penggaris kaca) Konveyor serbuk sisa Sistem ekstraksi Meja putar NC sebagai meja tambahan Penukar palet Majalah alat 60 slot Probe pengukur Heidenhain Handwheel Jendela penglihatan berputar IKZ 40 bar Penyemprotan serbuk sisa Mode operasi 4 + Mesin telah dirawat secara teknis dan dalam kondisi sangat baik + Geometri dalam toleransi mesin baru + Transportasi dan instalasi dapat ditawarkan secara terpisah

Kondisi: baik (bekas), czc5F9d7 Bedpfx Ajcn Am Isd Rodf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Machining Center CWK 400 Year of Manufacture: 2005 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Rotary Table (4th Axis) CNC Control: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Operating hours: 42,000 h Tool changer: Chain magazine for 80 tools, HSK 63 2-station pallet pool Weiss motor spindle: 36 kW, 18,000 rpm Bdodpfxewpciaj Ad Rof Accessories and 60 tools

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.000 mm, panjang total: 2.000 mm, lebar total: 2.000 mm, panjang mata gergaji pita: 4.115 mm, lebar pita gergaji: 41 mm, Heavy-duty, fully hydraulic high-performance bandsaw, built in an extremely robust design, featuring a horizontally and parallelly moving saw blade for cutting profiles, pipes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bimetal and carbide-tipped saw blades. The saw unit is made of solid polymer concrete, ensuring maximum running smoothness and extended saw blade life. The saw unit is guided by a vertical and a round column (dual-column guide) with hardened and ground guide rails. Hydraulic blade tensioning and hydraulically pre-tensioned carbide blade guides. Material clamping is provided by two hydraulic vices. The user interface of the machine ensures simple operation. Cutting length can be set via a handwheel, with a 0.1 mm resolution. The piece count can be set through a counter; once the preset number is reached, the machine automatically shuts off. Material feed is managed by a feed cylinder for maximum cut accuracy. The machines are easy to operate and fully automatic. Bdedpfx Aoxc D Egod Ref SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical specifications: Bandsaws - KASTO Bandsaw Automatic Machine Model: SSB 260 VA Guided by two columns Year of manufacture: 1991 Cutting range: 260 x 260 mm Saw drive power: 4 kW Auxiliary drive power: 6.5 kW Cutting speed: 15-125 m/min Hydraulic saw feed: infinitely variable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Max. with multiple feeds: 5400 mm Material support height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: Chip conveyor, coolant system, multiple feed, side guide rollers, machine roller track, adjustable side guide rollers, prepared for bundle clamping device, multiple feed counter.