Sistem ekstraksi stasioner

Höcker MultiStar VR

Kondisi: bekas, Tahun pembuatan: 2025, Filtration unit, immediately available! BRAND NEW, in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damperExtraction fan, "DER4" series for clean air side installation, single-sided suction, direct drive. Key construction features: Spiral housing made of galvanized sheet steel, pre-configured for horizontal installation in MultiStar series filters, IEC-standard motor, high-performance impeller with backward-curved blades, designed for clean air extraction operation. Suction nozzle with spark guard. Impeller welded from steel, statically and dynamically balanced. For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance: Airflow volume (max. permissible): 15,000 m³/h Total pressure increase: 3,000 Pa Inlet nozzle: 450 mm diameter Outlet nozzle: 450 mm x 355 mm Drive motor: 18.50 kW, 3,000 rpm at 50 Hz | 3,600 rpm at 60 Hz Voltage / frequency: 400 V, 50 Hz Motor efficiency class: IE3, Premium Efficiency Weight, approx.: 330 kg Direction of rotation: RD 0 1.1.1. STCold conductor 18.5 kW 1.2. STMultiStar VR 6.6-195.25317AMultiStar modular filter unit with vibration cleaning for installation outside potentially explosive areas. Construction features: Galvanized, self-supporting sheet steel construction. Pressure surge resistance 200 mbar (type-tested, Dekra-Exam 342863200a-23ExA-Sip). Housing vacuum resistance max. 5,500 Pa (pulsed loads must be avoided). EU type-tested rupture discs. Weather protection cladding for the filter section with inspection door(s) and the required number of exhaust air connections (depending on air volume). Fire resistance EW 90ef, MPA-tested. Clean air connection as per project drawing. BG-tested needle felt filter material, suitable for wood and paper dust as well as many other dust types. Filter bags externally loaded, with reusable internal support elements. Filter cleaning takes place during operation breaks. Expansion chamber for pre-separation. The permissible fill height of the expansion chamber depends heavily on the material properties (bulk density, grain size, tendency to bridge formation, etc.) and is approx. 400...700 mm. Inspection door with viewing window and limit switch. Connection shaft for rotary valve, etc. Technical data and dimensions: Filter area: 195 m² Filter bags: 144 pcs Filter bag length: 2,530 mm Bag diameter: 170 mm Vibration motor: 0.18 kW, 400 V, 50 Hz - 1 pc. Agitator drive: 1.50 kW, 400 V, 50 Hz Footprint, L x W: 2,880 mm x 2,880 mm Space requirement, L x W: As per system drawing Height: 9,110 mm. Additionally included: Dry fire line, consisting of: o C-hose connection with blind coupling *) o Riser pipe from filter bottom edge o Distributor pipe system with extinguishing nozzles o Warning sign Note: According to DIN EN 12779:2016, sec. 5.4.2.3 the water connection must be located 0.4 m to 0.8 m above floor level and, in the event of fire, must be safely and easily accessible for connecting a fire hose. BGHM additionally recommends installing a dirt trap in the riser pipe. The necessary components, installation materials and labor hours for this are not included in the base price of the dry fire line. These must either be provided on-site or custom fabricated with special height = 3,000 mm. The sub-frame is not included in the scope of supply and will be specified and supplied separately. 1.2.3. STadditional S Cpsdpjx U Egrefx Aa Tjw

Kondisi: bekas, Total tinggi 6500 mm, luas dasar 2000 x 2000 mm, instalasi luar ruangan. Seri filter kompak model PKFP – 1 elemen – 1,92 x 1,92. Filter jenis rattle, pengoperasian tekanan lebih. Panjang selang filter 2500 mm, diameter 180 mm – sehingga total luas penyaring 105 m2. 2 kipas udara mentah – 2 pipa (diameter 300 mm): 1 x kipas KT 300, daya 15 kW, kapasitas 6361 m³/jam, tahun 1999; 1 x kipas S 25/300, daya 7,5 kW, kapasitas 7400 m³/jam, tahun 1993; 1 x kipas transportasi, 6,1 kW, kapasitas 57 m³/menit, tahun 1996. Total volume aliran sekitar 14.000 m³/jam. Mesin press briket Höcker Polytechnik tipe BrikStar C 3 - 12 . 1225, motor 3,0 kW, diameter briket 65 mm bulat, kapasitas kira-kira 40–45 kg/jam tergantung berat jenis material. Lokasi penyimpanan: Nattheim. Cpedpevviytsfx Aa Tjw

Kondisi: baru, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dua sisi, Line for longitudinal joining with two milling machines. 6000 mm length press. The machine is new and has never been used. All corresponding tools are included with the machine. Cpodewptnmepfx Aa Tew

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar yang dibutuhkan: 3.200 mm, persyaratan ruang panjang: 1.200 mm, kebutuhan tinggi: 2.100 mm, berat keseluruhan: 170 kg, lebar total: 3.200 mm, panjang total: 1.700 mm, lebar dalam: 1.500 mm, HEAVY DUTY Drying Trolley / Cantilever Cart - For the Toughest Demands Codpjfiuhvsfx Aa Tjpw Key Facts at a Glance: 1. Ball-bearing sliding track for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. Generous intermediate spacing of 135 mm allows for easy loading, even at fast working speeds 4. Upright, square-profile main beam for minimal contact surface 5. Large usable depth of 1,000 mm 6. High load capacity of 1,000 kg 7. Premium-quality rollers provide effortless mobility, even when fully loaded Simply outstanding quality, "Made in Denmark". The carts are usually available for immediate delivery from stock. To save shipping costs for our customers, we ship the trolleys pre-assembled (see photo). Setup is completed very quickly. Do you have questions? Contact us – we’re happy to help!

Kondisi: bekas, Painting line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - Air blast duct, top: 2 pcs - Air blast duct, bottom: 1 pc - Dust removal brush - With ionisation bar, top - With ionisation bar, bottom - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction outlet Ø 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400 / 50 Item 3 Venjakob VEN SPRAY Perfect Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR preheating, number of emitters: 2 pcs - Twin gun drive - Dry exhaust extraction - Extraction outlet diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min Cpsdpov I Akvofx Aa Tow - Belt cleaning system - Paint recovery via V-belt system - Gun control, EPS-CNC CNC 7000 - Colour management system for number of pumps: 3+1 pcs - Number of installed airless spray guns: 4 pcs - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed side - Exhaust air recirculation system - Exhaust fan control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~ 20 - 26 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small volume container - Gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla High-Level Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Payload per pallet: 300 kg - Max. part height: approx. 110 mm - Clear height between pallets: 120 mm - Dimension: centre of pallet to centre of pallet: 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, hot water - Without hot water regulation valves - U-shaped pass-through configuration - Infeed side: right - Feed rate via frequency converter adjustable ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~ 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. ± 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 000247, Gluestream PU-300 1C Single-Component Polyurethane Adhesive Application Machine Used machine, in near-new condition • Maximum gluing width: 300 mm Csdpjt Nfarjfx Aa Tspw • Gluing head divided into 3 combs, each 100 mm wide, individually controlled by solenoid valve • Glue bead spacing: 10 mm • Tray with anti-adhesive liquid that automatically closes the combs when the machine is not dispensing • Glue application rate: 100 to 200 g/m², adjustable as required • Gear-type metering pump • Glue viscosity range: 10,000 to 30,000 mPas • Feed speed: 7 to 15 m/min • Support rack for 200 l drum • PLC control with touchscreen, KINCO brand • Machine by GLUESTREAM, Slovakia, manufactured in Ukraine • CE certified • Year of manufacture: 2021. Installed in May 2022. Like new, less than 200 hours of operation WE ALSO HAVE THE HYDRAULIC PRESS FOR GLULAM BEAM PRODUCTION

Kondisi: baru, Tahun pembuatan: 2024, en Cpodpew Naansfx Aa Tsw

Kondisi: baru, With air flow rates of up to 22,000 m³/h, the stationary compact filter units of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger machining centers. Eligible for BAFA funding under Module 4. ECO JET series units are equipped with clean-air-side mounted fans, which draw dust- and chip-laden air towards the filter unit. The highest performance DUO models are fitted with two fans operating in parallel. A flange connection at the filter unit’s inlet allows for the attachment of individually sized ductwork. Thanks to aerodynamically optimized airflow within the separation chamber, coarse particles are immediately removed before reaching the filter sleeves. Remaining dust separated by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system, with the collected material being discharged into mobile collection bins beneath the filter unit. Applications: - Extraction at manufacturing machines, machining centers, or ductwork systems with multiple extraction points - Direct extraction during continuous operation - Industries such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics production and processing, paper production, orthopedic technology, and many others Advantages: Cpjdpfx Ajwwtuisa Tsw - Wide range of standard extraction systems with many customer-specific adaptation options - Consistently high extraction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings due to possible 100% recirculation operation in many cases - Small footprint due to compact design - Suitable for both indoor and outdoor installation - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individual system configuration - Eligible for BAFA funding under Module 4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 3.551 h, lebar total: 1.790 mm, tinggi total: 2.150 mm, berat keseluruhan: 2.300 kg, panjang produk (maks.): 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt ejection system. The accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take advantage of this opportunity to purchase the Kundig Premium-2 1350-RG wide belt sander. Contact us for more information about this machine. Additional Equipment • Steel roller • Rubber roller with device for a needle roller (unused) • Belt release system Machine Advantages Technical advantages of the machine • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) Cpodsx D E I Espfx Aa Tew • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Max. current consumption RP/RE: 36 A • Max. current consumption RE-L: 56 A • Required minimum fuse slow-blow RP/RE: 40 A • Required minimum fuse slow-blow RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Proper cable dimension cross-section RP/RE: 5x6 mm² • Proper cable dimension cross-section RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt air-blow diameter RE-L: 150 mm • Required total diameter of extraction connection RP/RE: 200 mm • Required total diameter of extraction connection RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for extraction RE-L: 5400 m³/h • Vacuum RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for blowing off belt or workpieces per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Max. workpiece width RP/RE: 1350 mm • Min. workpiece thickness RP/RE: 4 mm • Max. workpiece pass-through height RP/RE: 200 mm • Working height incl. machine base RP/RE: 910 mm • Feed speed range RP/RE: 3-15 m/min • Overall machine length RP/RE: 1690 mm • Overall machine length RE-L: 1850 mm • Overall machine width RP/RE: 1790 mm • Machine height incl. base and extraction nozzle RP/RE: 1950 mm • Max. machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Additional information Machine still connected to power

Kondisi: bekas, de-1 Codpfew I Syksx Aa Tjpw