Forklift listrik 4 roda

Hangcha CPD30-XEY2HA-SI

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5532, Tahun pembuatan: 2025, kapasitas angkut: 3.000 kg, tinggi angkat: 4.800 mm, pengangkatan bebas: 1.563 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.319 mm, panjang garpu: 1.220 mm, jenis penggerak: Elektro, de-to-en-elektro-4-rad-stapler Dedpfxoxy Tvij Aiuoch

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Dijual atas nama pelanggan. Telah direkondisi total dan dikirim oleh kami pada tahun 2008, beroperasi hingga 2024. Rotor AirTen baru dari pabrik, hanya digunakan dalam waktu singkat. Termasuk berbagai suku cadang dan dokumentasi lengkap. Termasuk konveyor masuk dan keluar serta rangka. Dcjdexnz Rkjpfx Aiuoh

Kondisi: baru, The perfect coating for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish. Components of a Powder Coating System A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings. Spray Booth and Application Area The booth provides a clean environment for the application process and ensures even distribution of the powder. Powder Coating Gun A powder coating gun is used to apply the powder coating material to the workpiece. Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability. Dcjdeun Sd Uspfx Aiueh Curing Oven A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber. Extraction System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air. Looking for a powder coating solution? Are you searching for a tailored powder coating system? We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you. Get in touch with us today!

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, de Dcsdpfx Aexgt U Eeiush

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), lebar dalam: 1.800 mm, panjang dalam: 2.300 mm, tinggi dalam: 2.500 mm, Perlengkapan: derek, pencahayaan, Lini shot blasting dan pengecatan. Dapat dilihat saat uji coba. Dcsdoygnm Depfx Aiujh

Kondisi: bekas, Tahun pembuatan: 2010, 2010 powder coating line, excellent condition. Currently in operation, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Process conveyor Automatic speed V = 1.2 m/min Variable speed from 0.5 to 2.5 m/min Pretreatment station MNA-3-LPG, total length 16.7 m Dedpsv Ed Ukefx Aiusch Entry zone: L = 2.5 m a. Washing, degreasing, and phosphating: L = 3.6 m Number of spraying frames – 10 Number of nozzles per frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ tank for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip-off zone L = 3.1 m Drip-off time – 2 min 30 sec c. First rinse L = 1.2 m Number of spraying frames – 4 Number of nozzles per frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water tank Rinsing time – 1 min d. Drip-off zone L = 3.1 m Drip-off time – 2 min 30 sec e. Final rinse L = 1.28 m Number of spraying frames – 3 Number of nozzles per frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water tank Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip-off zone L = 2 m Drip-off time – 1 min 40 sec Three extraction system connections with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 unit. Automatic post-wash dryer AST-1-KLPG: Working area dimensions L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, LPG-fired, 200 kW Three fans, air supply 6000 m³/h Two extraction system connections Temperature sensor and controller Overheat sensor Circulation detector Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 unit. Automatic curing oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers, LPG-fired, 300 kW each Eight circulation fans, each with a capacity of 6000 m³/h Two extraction system connections Temperature sensor and controller Overheat sensor Circulation detector Working zone made of galvanized steel Thermal insulation 200 mm thick Curing time – 25 min 1 unit. Overhead rail conveyor system ATR for paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 units Tensioning station – 1 unit Chain lubrication station – 1 unit Rails supporting structure drawings – 1 set.

Kondisi: baru, Tahun pembuatan: 2025, Measurements (L/W/H) 1400x1300x1800 mm Weight 0 kg Total power requirement 2.2 kW Saw Blade Sharpening Machine SAWMAX 600 ECO - Saw blade diameter min./max. 80-800 mm - Saw blade bore 10-200 mm - Max. saw blade thickness 1 - 7 mm - Tilt range 7-100 mm Dcjdpfxev A Hgkj Aiush - Grinding range for rake angle -3° to +30° - Grinding range for clearance angle 6° to 40° - Grinding range for resharpening angle tooth tip/tooth face 45 degrees - Adjustment range of grinding cycle 0 - 25 mm - Grinding speed 0.5-6 mm/s - Maximum speed 20 teeth/min - Negative bevel grinding: -27 degrees - Grinding head can be rotated at an angle of 90 degrees and 180 degrees - Grinding wheel diameter 125-32 mm - Circumferential speed 26 m/s - Coolant pump capacity 25 L/min - Hydraulic working pressure 4.0 MPA - Oil tank capacity 80 L - Total power 1.85 kW / 2.2 kW - Dimensions L=1400, W=1300, H=1800 mm

Kondisi: baik (bekas), täydellinen sahalinja Soderhamn//+Ari Dcsdsqy A Hcjpfx Aiush

Kondisi: siap digunakan (bekas), Cambio 75 syöttökuljetin, syöttökuljettimen pyörät Dcodpsv Irvuofx Aiujh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, I am selling a complete log sorting yard, imported from Germany and available for pickup in Osła near Bolesławiec. Manufacturer: Holtec + Falcone, Germany Processed diameter range: 14 to 65 cm Processed length range: 2.0 m to 15 m Included in the price is a very large stock of spare parts for the sorting plant, such as chains, gearboxes, motors, cables. The log yard consists of: • Long log infeed conveyor • 2 x Short wood feeders • Kesla crane at the feed table for aligning logs on the table • Complete operator’s station (cameras, monitors, computer) • Sorting system software • Log scanner for sorted material volume • Falcone 550 debarker from 2014 • Crosscut saw, diameter 1600 mm • Metal detector, max diameter 650 mm • Single boxes: 44 pcs. Dedjvcqi Aopfx Aiujch • Bark removal system under the debarker • Waste removal system at the crosscut saw • Automation and control system, fully optimized based on given parameters • Line capacity: up to 300,000 m3 per year on double shift