Tekan kolom tunggal - hidrolik

HANS SCHOEN SH-C 16

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) Cpjdpjfxyhfsfx Aa Tew - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN) TECHNICAL DATA: * Capacity: 100 tonnes (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and slide: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * High-quality bronze bearings (SnBz-12) * Pneumatic clutch-brake combination Csdpfjnxh T Rox Aa Topw * Fully enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * 6-point slide guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (circulating oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit) * Customized machine

Kondisi: baru, Technical specifications for pallet rack beam: Racking system: Stow Type: Pal Rack NS Included in delivery: 01x pallet rack beam, new Material colour: RAL 2004 orange Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Connector: 4 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x safety pins, new Cedpjlwkwdofx Aa Tspw Version: fully galvanised For securing the load beams against unintentional lifting

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Cpjdjra Rr Eepfx Aa Tew Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Tahun pembuatan: 1979, Kondisi: bekas, Pressing force 160 t Cpsdpelp Uz Refx Aa Tjw Clearance between uprights 850 mm Stroke 400 mm Slide area 800x700 mm Ejector stroke 300 mm Ejector force 20 t Table area 800x700 mm Total power requirement kW Machine weight approx. 12 t Space requirement approx. 1800x1800x4200 mm Sick BWS for safety and automatic operation Blow-off device Ejector Mechanical fixed stop Stroke/pressure cut-off Pressure hold time Approved for manual loading/unloading

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table dimensions: 650 x 650 mm Ram diameter: 140 mm (round) Stroke: 130 mm Power requirement: 4 kW Cedsfcw Apspfx Aa Tjpw Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Stroke Rate: 55 strokes/min (adjustable) * Distance between table and ram: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipped in accordance with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bushings, quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed gearbox with helical gearing in oil bath * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * Six-point ram guidance with used oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized ram adjustment Cpsdpenyh Sisfx Aa Tow * Mechanical overload protection (Hydraulic protection can be retrofitted as standard after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejectors (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler, coil reel, straightener, pneumatic or servo feed unit) * Custom-built machine

Tahun pembuatan: 2002, Kondisi: bekas, Press force 130 t Throat depth 350 mm Stroke 16-200 mm Strokes per minute 55 spm Ram adjustment 100 mm Table area 1200x700 mm Ram area 730x530 mm Passage opening in table 300x210 mm Table height 900 mm Pin hole in ram Ø 50 mm Cedpfx Ajlp U Dloa Tjpw Machine weight approx. 8.0 t Space requirement approx. WxDxH 1500x2200x3500 mm Pneumatic clutch-brake combination Hydraulic overload protection Drive via intermediate gear Central lubrication Motorized ram adjustment Two-hand operation Foot operation Control panel separate Approved for manual feeding operations

Kondisi: baru, Tahun pembuatan: 2026, with extraction system automatic sanding belt centering tool-free sanding belt change sanding belt size 2000 x 150 mm planar grinding area: 500 mm belt speed: 15/30 m/s weight: 120 kg motor: pole-changeable 2.2/3.75 kW extraction motor: 0.37 kW machine dimensions: 950 x 430 x 1050 mm Scope of delivery: including sanding belt grit 60 dust bag Cpsdpfx Aaeckk Ris Tew DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Kondisi: baru, Tahun pembuatan: 2026, High-quality construction Drive roller is crowned (ensuring the sanding belt automatically centers itself on the roller) and fully vulcanized for maximum service life and optimum smooth running. Tool-free and therefore quick, simple belt change. Continuously variable height adjustment for optimal setup of the belt grinder according to the operator’s needs. Freely adjustable metal workpiece stop for optimal and safe guidance of workpieces when using the large flat grinding surface. Belt speed is engineered for optimal performance, minimizing the risk of burning the workpiece during processing. Models equipped with extraction feature robust and flexible suction hoses. Motor protection switch with CEE plug device including phase inverter. 5-year warranty on the motor. 1-year warranty on the belt grinder. Belt length: 2000 mm Belt width: 75 mm Flat grinding area: 600 mm Belt speed: 15/30 m/s Colour: RAL 9007 Motor, three-phase 400 V: 3.0/3.75 kW Extraction performance: approx. 630 m³/h Extraction motor: 0.37 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Machine dimensions (with extraction unit) (W x D x H): 800 x 600 x 1450 mm Weight: 105 kg Cpedpebb R N Iofx Aa Tjw DELIVERY: FREE (within Germany) LOOKING FOR A DIFFERENT MACHINE? WE ARE A FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!