Menekan kolom ganda tekan otomatis

HAULICK RVD 50-800 NS

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine Lodjhigmbspfx Afieaa LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2000, lebar meja: 1.000 mm, panjang meja: 1.800 mm, lebar pelat tuas: 600 mm, panjang total: 25.000 mm, lebar total: 27.000 mm, tinggi total: 47.000 mm, berat keseluruhan: 43.000 kg, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Lasdpfx Afstiwgisisa Side walkways Floor-level installation

Tahun pembuatan: 1981, Kondisi: bekas, Press force: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Shut height (bottom), ram adjustment (top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Pin hole in ram: Ø 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Space requirement approx. (WxDxH): 2900 x 2000 x 3000 mm Lajdpfjlp U R Iox Afioa Centralized oil lubrication IMCO press force measuring device

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 100 tonnes Frame clearance (front): 1,400 mm Stroke: 250 mm Side passages: 400 mm Table: 1,250 x 1,100 mm Ram: 1,250 x 1,100 mm Stroke: 250 mm Speed: - Rapid forward: 400 mm/sec - Rapid return: 330 mm/sec - Under load: 24–43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Width: 1,700 mm Lsdpfxoc Uwx Ds Afisaa Depth: 1,800 mm Table ejector force: 6 tonnes Cutting stroke damping Pressure, time and travel dependent control Two-hand operation

Kondisi: bekas, Tahun pembuatan: 1995, 1675-B11-FQ-2350-B-FPS Lsdpjwc U Izsfx Afisaa

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm Laodouhaxfopfx Afioa FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Tahun pembuatan: 2023, Kondisi: bekas, Sheet width 300 mm Lasdpelp U Tbefx Afioa Coil weight 1 t Coil inner diameter 375–550 mm Coil outer diameter 1600 mm Machine weight approx. 0.5 t Space requirement approx. 1500x1500x1900 mm Hydraulic expansion Loop control 6x side limit arms Safety device Machine number: 35223

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Press force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through openings: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram mounting surface: 2,300 x 1,100 mm Lateral passage: 740 mm Installation height: 550 mm (stroke down, adjustment up) Stroke rate: 30 - 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-way slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Visualization Beckhoff Panel • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safety devices + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamps on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Laodpev T Anlefx Afisa Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Auxiliary drive motorized • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear locating disc and 3 removable guide arms at the front • Hydraulically actuated and driven pressure roller, laterally adjustable via handwheel • Coil car (stationary, decoiler moves hydraulically), lift height 770 mm with 4 guide rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground, and hard-chromed • Drive of lower straightening and feed rollers via gear transmission • Motorized adjustment of roller block via motors, adjustment accuracy 0.01 mm, values can be stored • Upper rollers openable by 100 mm • Entry feed roller pneumatically openable • Lateral strip guidance at entry with handwheel and threaded spindle • Exit roller basket and loop bridge • Loop control via ultrasonic sensor • Entry aid, hydraulically actuated, consisting of table with extendable tongue and upper bending roller Roll feeder Strip width: max. 600 mm Design features: • Rollers hardened, ground, and chromed • Drive by gear motor • Upper roller hydraulically openable • Hydraulic height adjustment • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feed • Safety fence surrounding the entire line • Decoiler and straightener on common base frame • Various spare rollers for the straightening machine The complete line can be inspected under power at the owner’s location!

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Installation height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1,150 mm Clamping area of table approx.: 780 x 640 mm Clamping area of ram approx.: 800 x 460 mm Pass-through hole in table: 690 x 170 mm Strokes per minute: 30 - 300 min⁻¹ Power requirement: 21 kW Overall height above floor approx.: 2,900 mm Machine weight approx.: 12 t Control: Siemens S5 Standard equipment Roll feed type: WAV - RDS 2E 1125 Max. strip width: 310 mm Strip thickness: 0.3 - 3 mm Ledpfxsuqc I Ae Afieaa Strip cross-section: 630 mm² Feed speed: 80 m/min Roll diameter: 125 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 1203697, Translated Used Eccentric Press (Double Connecting Rod) Manufacturer: Haulick & Roos Model: RVD 8/800 NS Press with separate control panel: Haulick & Roos RVD 80-800NS Eccentric press with double connecting rods and quadruple-supported eccentric shaft Serial number: 1203697 Year of manufacture: 1990 Press force: 800 kN Stroke rate: 30–300 strokes/min Drive: 26 kW Ram stroke adjustment: 4–60 mm Ram adjustment: 80 mm Table size: 800 x 640 mm Pass-through hole: 780 x 60–160 mm Table height above floor: 1240 mm Upright (frame) width: 780 mm Upright side clearance: 350 mm Shut height (max stroke down/ram up): 300 mm Space requirement for press (L x W x H): 3200 x 1700 x 3000 mm Control cabinet (L x W x H): 1800 x 400 x 1900 mm Weight: 12,000 kg Lodpfx Asudn Utefioaa Decoiler: Eigl 2527-90 Powered: No Straightener with loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300 mm Max. thickness: 3 mm Number of rollers: 5 Feeder: Haulick & Roos RS 260/120°/2727 Max. feed length: 260 mm Max. width: 260 mm Max. thickness: 3 mm Feed speed: 40 m/min Material cross-section up to 800 mm? (Please clarify if 800mm refers to width or overall cross section.)