Angin separator - pemisah bahan keras

Hazemag HA 1412 UL

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Hfodevwlqqspfx Aa Nsb Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Tahun pembuatan: 2024, Kondisi: baru, Overview – Various Configuration Options *Not all items may be required: Optional: - Bale Breaker MHB starting from €24,990 net - Straw Mill MHZ starting from €7,980 net - Special Hopper €970 net - Cyclone from €3,750 net - Sheet Metal Silo demonstration unit with discharge (only sketched in the picture) *Optional, if feeding by wheel loader is desired Unit price net from €14,750 – demo unit - Dedusting Screw Conveyor – approx. 4 m length Four screens are mounted underneath for suction extraction. Net unit price from: €9,750 - Exhaust Components / Hoses flat rate €945 net - Control System for Complete Plant Net unit price: €2,750 - Demonstration Unit Extraction Device MMJET 160, with cleaning system Connection: 160 mm Fan 2.2 kW Airflow: 1850 m³/400 V Automatic compressed air cleaning Net unit price from: €6,950 - Baling Press B 400 Bale size approx. 400 x 400 x 800 mm (height adjustable) Up to 30 bales per hour at ±20 kg From €59,995 net * A reference installation (baling press) is located at postal code: 64579 Gernsheim Technical Data: Bale size (WxDxH): 400 x 400 x 800 mm (height adjustable on request) Bale weight ±20 kg (material-dependent) Performance: approx. 30 bales per hour Hedpfx Aasff Sbie Nofb Feed hopper capacity: approx. 0.7 m³ Min./max. level sensors in hopper Hydraulic pre-compactor Hydraulic pressing ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in pressing channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight: approx. 1,500 kg mütek baling presses / packaging machines are designed for producing bales from a wide variety of materials such as shredded miscanthus or elephant grass, wood chips, sawdust, and chopped straw. These machines feature robust construction, ensuring consistent quality during continuous operation. The baling press compacts material filled into the storage hopper by hydraulic pressure without the use of binding agents and packs the material into plastic bags. The material volume can be significantly reduced using the baling press. The volume reduction factor depends on the material. The maximum material moisture content must not exceed 18% ATRO. The hopper of the mütek baling press can be loaded automatically or manually and has a capacity of approx. 0.7 m³. Hoppers with higher volumes or with integrated extraction and filter systems as complete disposal units are also available. In addition to automatic feeding by deduster, mütek offers feeding by screw conveyors. For both options, automatic dedusting is possible. mütek baling presses are equipped with a control cabinet. In standard version, bale dimensions are (WxDxH): 400 x 400 x 800 mm. Height can be adjusted to customer requirements on request. Baling offers the following advantages: - Simple and safe storage - No loose dust - Minimization of storage space - Low transport volume *Raw Material Requirements: - Dry (max. 30% ATRO) - Maximum length 35 mm

Tahun pembuatan: 2024, Kondisi: baru, Air Separators ZIGZAG Application Description: The ZIGZAG-type air separator is a device designed for cleaning materials in the waste recycling process. The separator separates light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials sized 0-150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator offers multi-point adjustment to ensure optimum purity of the separated fractions. ZIGZAG separators are used in various fields, including: - Weight-based classification of metal granulates - Cleaning shredded scrap from light fractions (foils, plastics, paper) - Removal of volatile fractions during WEEE recycling - Cleaning of plastics and rubber - Cleaning of municipal waste and glass - Dust removal Hfodpfeua D Alex Aa Njb Construction Description: The ZIGZAG separator consists of individual components mounted on a shared support frame. The first section features the ZIGZAG module, equipped with an inspection opening and adjustable flow gap for material throughput. The second section houses a cyclone designed for discharging the light fraction. Beneath the cyclone, a variable speed rotary valve ejects the separated materials. The fan with electronic speed control is located at the top of the assembly. The construction is partially adapted for loading and unloading via belt conveyors. The separator is equipped with a control cabinet featuring a comprehensive safety system.

Tahun pembuatan: 1996, Kondisi: baik (bekas), Four-sided planer Weinig Unimat 23 – German made – Ribbed cast iron table – Year of manufacture: 1996 – Feed rollers integrated in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Ribbed table Spindle diameter: 40 mm 1st (bottom) spindle: 7.5 kW 2nd (right) spindle: 7.5 kW 3rd (left) spindle: 7.5 kW 4th (top) spindle: 11 kW 5th (bottom) spindle: 7.5 kW Feed speed, steplessly adjustable: 6–36 m/min Feed motor power: 5.5 kW Hedpfx Aeh Dwl Doa Nefb Six steel top feed rollers Two rubber top feed rollers Three in-table feed rollers Pneumatic feed pressure Pneumatic shoe pressure Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Central (divided) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-MF450HD Special Baler is the ideal baler for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing bulky items like used tires and car bumpers to a minimum volume. The baler stands out with its simple and safe operation and large feed opening, making it perfect for medium to high material volumes. By compacting these waste/recyclable materials you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return materials to the recycling stream. Hfodpfxovug Dyo Aa Nsb Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long twin cylinders for even and early material compaction User-friendly lever operation Bale ejector for easy bale removal Additional retaining claws to reduce material spring-back Holder for 4 rolls of strapping band A quality product "Made in Europe" Suitable for compacting: PET bottles Food cans and tin containers Plastic canisters and plastic packaging Used tires and bumpers Big bags Cardboard and film Difficult-to-compact recyclables Additional options: Annual maintenance with UVV inspection Machine color as per RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands / strapping wire Motor 11 kW 32 Amp The demo video shows the BTS-MF550HD Special Baler. Can compactor, can baler, PET baler, PET press, tire baler, used tire baler, tire press, can press, baler, paper press, waste paper press, cardboard press, cardboard baler, film press, paper baler, waste baler, waste compactor, waste press, residual waste press, recyclables press.

Kondisi: baik (bekas), Technical Specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic drop-end bearing Cone bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Multiple sets of rolls for tube and profile rolling The seller accepts no liability for typographical or data transmission errors. The machine’s condition regarding appearance, technology, and wear is appropriate for its age; used machines are sold without any warranty. Hfsdpjwchn Uofx Aa Nsb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 4.000 kg, tegangan masuk: 380 V, daya: 26 kW (35,35 hp), tinggi ejeksi: 1.000 mm, lebar bukaan: 600 mm, panjang rotor: 1.000 mm, shear rotary 2 poros - 2 motor: 15kW dan 12kW - pembalikan arah jika terjadi kemacetan - ruang penghancur 1100 x 900 mm - ketebalan pisau baru 30 mm - berat 4 ton - hopper pemuatan besar - kemungkinan pemuatan. Sangat serbaguna dan bertenaga tinggi, dapat digunakan untuk pra-penggilingan bahan organik untuk metanisasi, kabel tembaga, gumpalan, gipsum, BA13, D3E, plastik, kayu, bumper, botol, logam, badan berlubang, dll. Bisa digunakan untuk menggiling anak sapi sakit di peternakan rendering. Hfodpfxsh Diwus Aa Neb

Tahun pembuatan: 2023, Kondisi: baru, Stock machine Hfjdpfx Aajhwdvce Neb Completely newly developed high-performance centrifuge, based on our many years of production experience with the predecessor model of this centrifuge. We have implemented various improvements concerning maintenance costs, downtime, and wear parts.

Tahun pembuatan: 2022, jam operasional: 400 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, !!!Demonstration machine with low operating hours!!! Hfjdort Uvzspfx Aa Nsb Model: Lepton 5100 Year of Manufacture: 2022 Operating Hours: approx. 400 hrs Location: D 84069 Schierling Availability: short-term Specification: - Base machine Lepton 5100 with screen decks 1 and 2 * Screen deck 1 aperture: 36 mm * Screen deck 2 aperture: 24 mm - Pre-screen deck with extended hopper and variably adjustable dosing roller - Volume measurement by loading - Pre-fitted for air separator - Compressor - LED lighting package - Radio remote control for all major settings - Diesel-electric drive, 80 kW - Axle leveling system - Twin-axle, 80 km/h type approval - Total weight: 19,000 kg - Transport dimensions: 11.97 m length, 3.98 m height, 2.53 m width * No special transport permit required Suitable for screening: Compost, green waste, biomass, root wood, waste wood, municipal solid waste, RDF, various recyclable materials (not suitable for construction rubble or excavated soil) Additional information: Very good used condition, fully operational

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, Dijual gunting scrap Lefort mobile. Mesin dalam kondisi sangat baik dan dapat dilihat kapan saja. Hedpfxox Elyae Aa Nsfb