Penggoreng kacang buatan Heat & Control dengan kapasitas 600 kg/jam

HEAT & CONTROL NC-3006

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 403, Equipment / Additional Information: Unwinding Device: Roll Holding: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Max. Tool Dimensions: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Power Upper Heater: 18.8 kW Installed Power Lower Heater: 14.1 kW Idle Cycle Rate: 40 cycles/min Main Drive Motor Power: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: approx. 30 l/h Air Consumption at 7 kg/cm²: approx. 125 l/cycle Total Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: Duedpfon D Ew Iex Adgsl 3599 // 457 // 10 // Vending cup, Capacity = 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo cup, Capacity = 300 ml / 12 oz 509 // 452 // 6 // Ice cream cup, Capacity brimful = 140 ml / Capacity at 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo cup ⌀ 81 / 180 ml 740 // - // - // Standard cup with sealable rim ⌀ 75–120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo cup, Capacity = 80 ml 595 // 456 // 10 // Vending cup, Capacity = 150 ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granulate cup 180 ml / technical part with flat sealing rim

Kondisi: bekas, Tahun pembuatan: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The line is fully equipped, in very good technical condition, and shows only minor signs of use. The system is still installed and connected, and can therefore be inspected in person at any time. Technical Specifications Output: 60 bags/minute Doypack/flat pouch formats: 20/25g, 50g, 300g, 500g, 750g Micro-dosing capability for powders Modern wide zipper/belt Scope of Supply - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing units between the discharge stations, the mixer, and the multihead weigher - Ishida X-ray inspection system with reject function, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject system Dedpfx Adetz H T Dogoul - System for the injection of nitrogen or other inert gases, including a measurement system - Dust extraction system - Euro-slot punch - Smooth sealing system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Djdsd Tiu Eopfx Adgoul Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Design pressure (low side): 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, lebar total: 6.100 mm, panjang total: 1.550 mm, tinggi total: 2.350 mm, berat keseluruhan: 1.800 kg, masa garansi: 6 bulan, daya: 3 kW (4,08 hp), tegangan masuk: 400 V, Sarp Line for pasteurising filled pasta – Hourly output from 250 to 400 kg. The line consists of the following units: 1) Feeding conveyor belts for the pasteuriser 2) Pasteuriser model SPA610VD, electrical power 1.2 kW, thermal power 120,400 cal/h (140 kW), belt width 1000 mm, pasteurisation tank length 6000 mm, overall dimensions 10163 x 1600 x 2210 (h) mm, total weight 1000 kg 3) Elevator conveyor model SNZ 4) Wrapping – Cooling unit model SIR4105-A 5) Complete electrical control panel Djdpfx Ajui Rixodgsul The line is entirely constructed from stainless steel and has the following features: - Conveyor belt width: 1000 mm - Pasteurising belt speed adjustable from 1 to 3.3 meters per minute - Wrapping belt speed adjustable from 0.65 to 1.95 meters per minute - Cooling belt speed adjustable from 0.43 to 1.3 meters per minute - Pasteurisation chamber temperature: 96 to 99°C - Wrapping unit internal temperature: 65 to 70°C - Cooling unit internal temperature: +3°C - Pasteurisation time: 1’50” to 5’30” - Wrapping time: 3’40” to 10’55” - Cooling time: 7’58” to 24’ A suitable steam generator for this line is available, but not included in the stated price. Electrical system 220 / 400 V – 3 phase – 50 / 60 Hz, fully overhauled, 1 year warranty, CE and USDA compliant. 1-year warranty!!! WHY BUY FROM A DEALER??? BUY DIRECTLY FROM THE MANUFACTURER!!! For more information, contact Ostoni in Italy! WE HAVE THE LARGEST ONLINE SELECTION OF MACHINES AND MOLDS FOR THE PRODUCTION OF RAVIOLI, TORTELLINI, CAPPELLETTI, TORTELLONI, GNOCCHI, PELMENI, PIEROGI, VARENIKI AND MANY OTHER FILLED PASTA SHAPES!!!

Kondisi: sangat baik (bekas),

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Kontrol terpisah untuk penggerak utama dan transportasi film pembungkus. Sistem kontrol Siemens S7. Layar sentuh Siemens. Kontrol fotolistrik untuk transportasi film. Penyegelan panas melintang dan memanjang. Meja perekat film. Unit pelipat samping. Mesin sekarang dilengkapi dengan sistem kontrol Siemens S7 terbaru! Lihat video: youtube: VP220 mesin kemasan, shorts Dujdpfx Ajvk Rv Sedgel

Kondisi: diremajakan ulang (bekas), Hosokawa Mikropul ACM 10 fine impact mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine impact mill in excellent condition – an ideal solution for precise grinding and classification of powders and granulates. Technical data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Excellent (completely overhauled), with newly built control cabinet Additional details: • Classifying screen available: A matching classifying screen is also in stock. • Comparable mills: We have similar/analogue mills in stock that operate on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimised for reduced power consumption • Versatile: Suitable for processing chemicals, food, pharmaceuticals, and more Condition and inspection: The machine is ready for immediate use and can be inspected by appointment. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for further information or a customised quotation. Dedpevn Riaofx Adgsul

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, comprising the following equipment: - Single-lane elevator - Three-lane elevator - 24-head combination weigher with 1L hoppers - 32-head combination weigher with 1L hoppers - KEN Hygiene System EWD 50 (washing station for auxiliary weigher components) - Platform with stairs - Distribution tool – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set has only been used for equipment testing and has approximately 100 operating hours. Dsdpfxspxm Ugj Adgoul The line has been professionally disassembled by authorized Cabinplant and Multivac service teams.

Tahun pembuatan: 2020, jam operasional: 13 h, Kondisi: sangat baik (bekas), 1 x Urschel E Tran slicer Dujdpfsw Hq T Usx Adgsl Baru digunakan selama 13 jam Awalnya akan digunakan untuk mengiris keripik roti, namun dapat juga digunakan untuk sayuran, dll… Berlokasi di Swiss

Kondisi: bekas, Tahun pembuatan: 2006, The Kahl twin-screw extruder is a machine manufactured by Kahl in 2006. It is currently stored in Germany and comes equipped with a fine material hopper, fine material discharge, fine material sack, a belt unit (type: BTK 1510-0), water dosing unit, extruder, and intake blower. The machine underwent a comprehensive overhaul in 2016. Additional features include dust removal, tumbling sieve, dedusting unit, final packaging, belt dryer, product hopper, tube chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust blower, airflow rotary dryer, feed table, mixer, as well as an additional intake blower and belt dryer. Delivery terms are FCA. Equipment: - 1 x Feed table Duodpovfxqysfx Adgol - 1 x Tube chain conveyor - 1 x Mixer - 1 x Water dosing unit - 1 x Extruder - 1 x Intake blower - 1 x Cyclone - 1 x Rotary valve - 1 x Distributor - 1 x Belt dryer - 1 x Product hopper - 1 x Tube chain conveyor - 1 x Fine material hopper - 1 x Fine material discharge - 1 x Fine material sack - 1 x Intake blower - 1 x Belt dryer - 1 x Rotary valve - 1 x Dust sack - 1 x Exhaust blower - 1 x Airflow rotary dryer - 1 x Dedusting unit - 1 x Tumbling sieve - 1 x De-dusting unit - 1 x Final packaging - 1 x Belt unit, type: BTK 1510-0 Comprehensively overhauled in 2016