HEBROCK AKV 3005 DK-F

HEBROCK AKV 3005 DK-F

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Kwodpfxexyiile Ac Heu Lokasi penyimpanan: Nattheim

Kondisi: bekas, Tahun pembuatan: 2014, with jointing milling unit including DIA tools jointing thickness up to 40 mm workpiece thickness up to 3 mm combined milling station radius R 2.5 mm Technical description: with hot-melt adhesive application to the workpiece for edge material up to 3 mm 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit Maintenance-free, coated glue pot HF trimming station (16,000 rpm) for front and rear edge overhang Ksdpfoyfp N Dox Ac Howu HF milling station (16,000 rpm) with replaceable insert cutter (combined version) and fine adjustment of the cutter from the operator side Free slots for additional processing units (Hebrock system) Feed speed approx. 10 m/min Cutting depth adjustment of the trimming saw Signal lamp for workpiece sequence Robust chain drive Ergonomically arranged operator panel Double-roller upper pressure beam Aggregate viewing windows accessible from both the operator and rear machine side PLC control system with touchscreen included Technical data: - Feed speed: 10 m/min - Panel thickness from 8 – 40 mm - Weight: depending on equipment approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm airtronic for machines up to 8 mm edge thickness – 1 pc Technical data: Edge thickness possible: 1.2 mm – 3.0 mm Maximum panel thickness: 25 mm Feed speed: 7 – 10 m/min depending on edge material Ready for operation: 3 min Air consumption: approx. 800 l/min for the complete machine Power max.: 32A / 16 kW for the complete machine; higher power supply necessary for machines with groove saw Extraction as before PLC control is mandatory Upgrade to 8 mm edge thickness 1 pc up to max. 40 mm workpiece thickness Including pneumatic saw adjustment Separate pneumatic cutter adjustment 1 pc, controllable from the operator panel (straight/radius) Buffing station (buffing wheel) 1 pc Corner rounding cutter 1 pc incl. combination tool and pneumatic adjustment, chamfer/radius Max. workpiece thickness 40 mm Min. workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 pc incl. pneumatic lift-off device radius R 2.0 mm Flat scraper 1 pc with pneumatic engagement control Glue pot change system in preparation 1 pc without second glue pot – includes possibility to process PU glue with the machine – without glue discharge device downwards Special PU glue discharge cleaning system downwards 1 pc 60 mm panel thickness for machine with jointing 1 pc – max. workpiece thickness with jointing unit 60 mm – jointing thickness at 40 to 60 mm – workpiece thickness up to 2 mm Special infeed fence for overlaid panels 1 pc, 16 mm and 19 mm thickness Max. overlay of edging 8 mm Separate extraction for jointing unit 1 pc, directly at jointing unit, vertically upwards, d=80mm, for optimal extraction performance from AKV 3005 DK-F onwards strongly recommended Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Nesting for the combination milling unit 1 pc For processing workpieces with cup hinge drillings Only possible on the underside of the workpiece Nesting for the radius scraper unit 1 pc For processing workpieces with cup hinge drillings Only possible on the underside of the workpiece Release agent spray device 1 pc Cleaning agent spray device 1 pc for easier removal of adhesive residue Antistatic spray device 1 pc Mandatory for airtronic Antistatic coolant is sprayed on the inner sides of the edge overhang before the combination milling station Location: Supplier

Kondisi: bekas, Tahun pembuatan: 2005, nomor mesin/kendaraan: Werksüberarbeitungsnummer: WÜA920DK-F12960, Mesin bekas GM020.0029 Tahun pembuatan: 2005 AKV 3005 DK-F Versi 8 mm Stasiun milling 1: Kombinasi Stasiun pembersih Pemotong sudut bundar Pemotong sambungan Pisau tarik permukaan dengan pengangkatan Kwsdpfx Asw In R Eoc Hju Pisau tarik profil Rangka bawah Pengaturan milling pneumatik Kontrol SPS Persiapan untuk tangki yang dapat diganti