Mesin pengikat tepi

HEBROCK AKV088D

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, HOLZ-HER Accura 1558 Performance Edge Banding Machine with Belt Bridge and Intelligent Equipment Package for Edge Thicknesses up to 15mm. Effortless program changeover and tool adjustment via 18.5” full-colour touch screen (16:9). Short glue system heating time with GlueJet (GJ 301 automatic), approx. 2–3 minutes depending on adhesive type and ambient temperature. Always fresh adhesive thanks to the GlueJet application system and adhesive cartridges. PUR glue changeover and system cleaning is straightforward and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for film-protected materials, such as high-gloss and super-matt! One of the major highlights of this machine is the multifunction package, particularly advantageous for operations handling a wide variety of edge materials. The DIA tools are multi-stage and can switch between radii and chamfers as required – from the longitudinal milling unit to corner copying and up to the profile scraper blade. The extendable workpiece support and extended infeed area with air-cushion table facilitate processing of large workpieces. A guiding system assists with the infeed of small workpieces into the machine. Edge thickness (coil): 0.4 – 3 mm (material-dependent) Edge thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet for EVA and PUR grades, with minimal effort required. All common edge types processed, including high-gloss, super-matt, and solid wood edges up to 15 mm. Motorised infeed fence adjustment Narrow part guide system Prepared for connection to a RETURN system Motorised pressure bridge with upper belt feed Lrodpfjyfgrpex Aarot Multifunctional units for fast changeover between radius, flush, and chamfer Spray units (vertical & horizontal) and much more. Delivery, installation, and operator training for the machine can be provided by us at an additional cost. The machine is currently located in our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Kondisi: sangat baik (bekas), SICAR Forte 400 thickness planer - Working width: 400 mm - Planing height: 300 mm - Cutterblock with traditional knives Ljdpfx Ajt Rp Hxearort - 4-knife cutterblock - Cutterblock speed: 5200 rpm - Electrically adjustable table height (up/down) - Main motor power: 3 kW - 3 feed speeds - CE certificate

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Lodpfxjl Rix Es Aarert Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: bekas, nomor mesin/kendaraan: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Joint trimming: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 units Ledowuz Nijpfx Aarsrt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 241.125, Fungsionalitas: berfungsi sepenuhnya, Bandsaw horizontal produksi Schelling, dirancang untuk memotong material berbasis kayu Lredpfx Aox Ebzdearot HPO – program optimisasi pemotongan Proyeksi mata gergaji: maks. 95 mm Kecepatan gerak carriage gergaji hingga 120 m/menit Panjang pemotongan: Model FH 4 430 - 4.300 mm Dapat diperiksa dalam kondisi bekerja hingga awal 2026. (pembongkaran direncanakan) Diameter maksimum mata gergaji – 350 mm Proyeksi – 95 mm Bukaan penjepit 90 mm Daya motor gergaji – 15 kW Diameter scorer 300 mm Laju masukan material maju hingga 80 m/menit mundur 80 m/menit Laju gerak gergaji maju hingga 120 m/menit mundur 120 m/menit

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Mesin bekas GM020.0068 AKV 3003 DK - F Tahun pembuatan: 2007 Spesifikasi: 3 mm Stasiun milling ke-1: Kombinasi Pisau tarik permukaan dengan pengeluaran Ljdpfxjw Nih Io Aarort Rangka Penyesuaian milling pneumatik Tuver saklar batas, kemiringan 7,5°

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, - PVC Primus, sistem cartridge PVC 3 mm - Pengeleman, pemotongan rata, frais rata, frais serong, frais radius - Pisau tarik, unit pemoles - Dimensi: 4700 x 1400 x 1650 mm - Berat: 1300 kg - Ukuran kerja: panjang 4500 mm lebar 1020 mm tinggi 1630 mm - Diameter konektor: 140 mm - Lebar benda kerja: min. 60 mm - Kecepatan feeding: 11 m/menit - 6 bar - 400 Volt udara tekan - Ketebalan edge: 8 mm untuk strip, 2 mm untuk roll - TANPA unit pra-frais - Silinder pneumatik baru Pengiriman tersedia dengan biaya tambahan! Lrjdpjwv Uq Asfx Aarot Karena usia mesin bekas, tidak ada garansi untuk penjualan kepada pelanggan bisnis.

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (including SOFTFORMING), with throughfeed drilling machines, splitter, and high-speed automatic conveying technology. Configured as follows: Lredpfsttgy Hox Aarst A) Infeed station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided formatting and edge banding machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided formatting and edge banding machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) G) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) H) 3rd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Outfeed unstacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Lrodpot N Ix Rofx Aarot Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)

Kondisi: bekas, Tahun pembuatan: 2008,