Double mitre saw

HECHT DS 150

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Bedouiy Ngopfx Anpeww Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Stürtz vollautomatische Schweißlinie (2 Maschinen mit je 4 Köpfen) und Doppelkopf-Eckenputzlinie - 1 x Schweißmaschine VSM40/26 - 1 x Schweißmaschine VSM30/26 - 1 x Handlingsystem mit vertikalem Transportsystem - 1 x Kipptisch - 1 x Doppelkopf-Eckenputzer mit Bohrkopf - 1 x Auslauftisch Bedpfevkdubsx Anpjww Eingestellt für Rehau Brillant/Euro70, Synego und Geneo. Die Linie ist noch in Produktion und kann im laufenden Betrieb besichtigt werden. Voll funktionsfähig, sehr guter Zustand.

Kondisi: sangat baik (bekas), Gergaji fasad GRAULE AS450 Biaya transportasi di dalam wilayah Uni Eropa sekitar 350 euro. Bwodpfx Ael Skkfsnpew

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Area kerja X: mm 3400 Spindel elektrik 1 HSD, sambungan ISO 30 – kecepatan maksimum 18000 rpm Penggantian alat otomatis Bwjdpfxozmyuxe Anpsw Posisi penggantian alat: 5+1 Meja kerja dengan 4 penjepit dan posisi otomatis Kepala mesin berputar untuk pekerjaan samping Berat: 1950 kg Dimensi: 5.472 mm x 1.900 mm x 2.200 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Jumlah mesin: 1 unit Panjang kerja: 2500 mm Pengendali: tidak ada Hecht ES 350, Mesin pemotong profil kaca satu sisi ----- Pemutar secara pneumatis terhadap penahan tetap. 45º/90º/135º dengan penggerak mata gergaji secara pneumatis pemutaran pneumatis melalui penahan pemutar manual dengan kaki mesin, penegangan pneumatis Mata gergaji HM 350 x 3,0/2,2/30 Z 100 Ukuran rangka gergaji: panjang 700 mm, lebar 1.600 mm, tinggi 1.500 mm Penahan pengukur 1,5 m Dudukan 1,5 m dengan penyangga Penahan pengukur 3 m Perpanjangan dudukan dari 1,5 m menjadi 3 m dengan penyangga Sisipan meja beralur untuk profil kaca yang telah diproses HECHT ASB, penahan panjang manual dengan tampilan digital, 2500 mm Bedpfevpr N Rsx Anpeww Dilengkapi dengan perangkat penyedot debu (spesifikasi teknis sesuai dengan produsen – tanpa jaminan!)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, berat keseluruhan: 1.550 kg, kecepatan pemotongan: 2.800.000 mm/menit, el Bjdpfjyhfm Djx Anpeww

Kondisi: baru, Tahun pembuatan: 2026, Comparable to e.g. Emmegi Double mitre saw for steel Cutting length: 5000 mm With 7 NC axes for length positioning, tilting of saw blades outward and inward, feed of saw blades, and variable speed control of saw motors Torsion-resistant welded steel frame with linear rail guidance in longitudinal direction 2 x saw motors, each 4.5 kW Saw blade speed: 0 – 250 rpm Saw blade feed motorized, from rear to front Infinitely variable feed rate Motorized angle adjustment, between 135° and 45° For use with HSS circular saw blades Ø 400 mm Pneumatic safety hoods Water cooling system with pump and coolant tank Left saw unit fixed on the machine base, right unit motorized and movable Positioning accuracy ± 0.15 mm Max. traverse speed: 25 m/min Length positioning with consideration of cutting angle and profile height Each saw head equipped with three horizontal and vertical profile clamps; in the event of pressure drop, the horizontal cylinders remain clamped Material support between saw heads, pneumatically pivotable 15” touchscreen Processing of single cuts Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network Corner mitre cutting Overlength cuts Short cuts from 5 mm cut length Cross-cuts Available options: Micro-spray lubrication system Saw unit inward tilt increased up to 150° Bedpoyinu Hofx Anpjww Label printer Barcode reader Additional network connection and teleservice contract

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 3.425 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 4, This vertical 4-axis machining center MECAL MC 305 was manufactured in 2004. It features a powerful air-cooled 5.5 kW electrospindle with a maximum speed of 18,000 rpm and an ISO30 tool holder. The tool magazine is centrally positioned, protected, and accommodates various tools. It has a standard workpiece length of up to 4000 mm and an extended range of up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle type: Electric, air-cooled • Tool magazine: • Located in the center of the machine base in a protected area • Holds various tools: milling cutters, taps, end mills, angular heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with recirculating ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum quantity lubrication system (MQL) • Working area: • Standard workpiece length: up to 4000 mm Bwodpfx Anox D I Hkjpjw • Extended range (differential cycle): up to 8000 mm

Tahun pembuatan: 1998, Kondisi: bekas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine Suitable for materials such as PVC, aluminium and wood windows in a continuous processing operation. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two workstations (machines), one electrical control cabinet, an operator panel, and transport units. Also included are a stand with a vibrating transport system, chip conveyor unit, and a stand with acknowledgement printer. Our photos are shown first at the current location, followed by additional photos demonstrating the system prepared for transport and for sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5mm - Drilling unit with collet chuck (vertical, upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical, downward) - Twin drilling unit with collet chuck (vertical, downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical, upward) - Horizontal milling spindle with 11 disc cutters - Triple drilling unit with collet chuck (vertical, downward) Bwedju Ibuwjpfx Anpjw - Triple drilling unit with collet chuck (vertical, upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width 2,300 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, tekanan: 8 batang, urban-sv430-en Bwedpfx Anjzcmg Iepsw