Pers eksentrik - kolom tunggal

HELMERDING ERH 150 B

Kondisi: bekas, Tahun pembuatan: 1991, Daya tekan 1.500 kN Langkah dapat diatur 20 - 132 mm Penyesuaian ram maks. 90 mm Jumlah langkah 50 / 75 1/menit Bjderm Nqmjpfx Aa Told Data dan gambar tambahan atas permintaan Bekas, mesin press telah sepenuhnya dibongkar Tidak berfungsi, perlu perbaikan mekanis dan elektris Press saat ini telah dirakit kembali secara mekanis

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l Blsdpfx Ajfxyhfoa Tsd The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 1984, Tenaga tekanan 1.500 kN Langkah dapat diatur 20 - 120 mm Penyesuaian ram maks. 85 mm Jumlah langkah 50 / 75 per menit Blodeyg Ebxepfx Aa Tjd Berat mesin ca. 8.000 kg Data dan gambar lebih lanjut atas permintaan

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN) TECHNICAL DATA: * Capacity: 100 tonnes (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and slide: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * High-quality bronze bearings (SnBz-12) * Pneumatic clutch-brake combination * Fully enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * 6-point slide guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase) Blsdpfxonxh T Rs Aa Tsd * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (circulating oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit) * Customized machine

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram area: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Space requirement: 1700 x 1200 x 2500 mm Blodpfx Asb Tdquea Ted Weight: 3.3 t

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Bledpfxshrnbke Aa Ted Without control cabinet.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide Bodpfxsgpxc Sj Aa Tjld - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Bedpfx Aecxxx Rja Tsld Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation - motorized ram adjustment - central grease lubrication (manual) - rupture disc - clamping plate - safe for manual loading/unloading - operating manual available Blsdpocubatjfx Aa Ted

Kondisi: bekas, Lebar material 300 mm Berat coil 3 t Ketebalan material 2 - 4 mm Mesin pelurus, 7 rol, pabrikan Schleicher, tipe RM 6-95/160 Lebar strip: 300 mm Ketebalan strip: 2 - 4 mm Luas penampang pelurusan: 1200 mm² Tegangan: 220/380 V 50 Hz Daya: 3,1 kW Uncoiler dengan roller penekan, pabrikan Schleicher, tipe H-3 Beban maks.: 3 t Lebar strip: 400 mm Tegangan: 220/380 V 50 Hz Daya: 3,92 kW Bodpfx Aaocdrmmj Tsld tanpa kontrol