Mesin bor sabuk cawan

Hess mit vielen einstellbaren Anschlägen

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Hjdpfjrigxyex Aa Dsfi Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Hfjdpfju Agh Sex Aa Doi Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 942, panjang total: 9.170 mm, lebar total: 1.635 mm, tinggi total: 3.100 mm, berat keseluruhan: 4.140 kg, arus masuk: 44 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, daya: 21 kW (28,55 hp), berat benda kerja (maks.): 800 kg, tekanan: 7 batang, Lattuada TL10 AV C mesin pemoles garis lurus dengan pemotongan miring 0-45°, cerium. Direnovasi di gudang kami di Belgia. Sudah diuji dan siap digunakan. Hfedpfx Aow U Nzrea Dsi

Kondisi: baik (bekas), Straight edge grinding machine; for grinding and fine polishing of straight edges, mitres, and bevels Specifications: • Glass thickness: 3-25 mm • Min. dimensions: 80 x 120 mm • Max. dimensions: 3 x 3 meters • Mitre angles: 0-60° • Power: 15 kW Hfedpfx Aou U H H Aja Dji • Dimensions: length 6.5 meters • Width with water tray: 1.6 meters • Height: 2.5 meters • Feed speed: 0.4 – 4.2 m/min • Weight: 2,600 kg Price on request

Tahun pembuatan: 1985, Kondisi: baik (bekas), angebot-22556 Technical Data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 3,000 mm - Minimum cutting length at 90° + 45° 335 mm - Cutting range: see enclosed diagram - Swivel range inward, manual 90° – 22.5° - Tilt range inward, manual 90° – 45° - Saw blade speed 2,800 rpm - Drive 380 V / 2 x 4,000 W - Compressed air connection 7 bar - Air consumption per cycle approx. 64 l - Space requirement approx. B 4,500 x H 1,950 x T 1,600 mm - Weight approx. 1,400 kg - Equipped with: - Adjustable cutting length with positioning control - Positioning control replaced around 2002 by WOLFF - Saw unit swivel and tilt function for tall and wide profiles, as well as compound cuts Hodpoimdlrsfx Aa Dsfi

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin edging kaca vertikal dengan 10 cup wheel, sudut variabel 0-45°. Total meter kerja: 179.000. Tinggi kaca minimum: 70 mm. Kecepatan: 0,5 - 5 m/menit. Ketebalan kaca: 3 - 50 mm. Dimensi mesin (P x L x T): 8,8 x 1,2 x 3 m. Berat: 4.300 kg. Hsdsx Hvxpjpfx Aa Dofi

Kondisi: belum diuji (bekas), Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above Hsdpfet Tqy Eox Aa Dofi - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: bekas, Tahun pembuatan: 2000, For fully automatic assembly of frame parts. Frame external dimensions: min. 120 x 120 mm, max. 1050 x 2,500 mm. 2 heating rails. Hodpfx Aaod H Irfj Dofi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, The machine is equipped with a parts magazine. The parts are returned to the operator. Hjdpstt Ddcjfx Aa Defi Equipped with 17 spindles.

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: SÇ 512 Alüminyum Pvc 3'lü Kol Yeri Delme Makinesi Yüksek Frekans Motorlu, • Complies with CE standards. • Enables machining of lock slots, hinge recesses, and handle holes on PVC profiles • Copy router head capable of vertical axis operation • Triple drilling system capable of horizontal axis operation • Universal template, possibility to produce custom templates upon request • Triple drilling, copy routing, or slot milling system can be used independently • High-powered motor ensures smooth operation • High-frequency motor (18,000 rpm) Hjdpfxsrana Ej Aa Dofi • Cooling system OPTIONAL • Right-side conveyor system (1 meter)