Mesin bor baris lubang, pasak dan pasak

Hettich Blue Max 19

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) Hodpewb Alljfx Ag Refd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: 25167180701, Fungsionalitas: berfungsi sepenuhnya, daya: 4,5 kW (6,12 hp), tinggi benda kerja (maks.): 60 mm, tinggi total: 60 mm, lebar total: 1.000 mm, kebutuhan udara: 2.000 m³/jam, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan rotasi (min.): 4.000 rpm, CNC machining center Brand: Masterwood Model: Project TF 100 2.0 Technical Data: Axes: X-Axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-Axis: Hfodoxz Hgdspfx Ag Rsd Max. workpiece width: 1,000 mm (for all units) Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min Minimum and maximum workpiece sizes depend on weight and the length-to-width ratio. - Air tables in the working area - Roller support at both infeed and outfeed - Plate measurement sensor - Ball screw spindle and linear guides - Rack and pinion drive - Central lubrication system - DXF file import Milling Unit Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Including integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond cutters, 1 WPL finish cutter Prepped for CLAMEX and door package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit configured for door processing, for machines with tool changers, fully equipped including special tool change position in the tool changer, angle gearbox for accommodating a lock case milling cutter, and a macro for lock cases Automatic, program-controlled central lubrication Monitoring camera

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: Hodpfounwk Tjx Ag Rsfd This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm Hsdpfx Asxraimjg Rsfd X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Hfjdpfxjv Sv Ens Ag Red Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, en-bimatic-prima-7.5-two-edge-banding-machine-full-tech-specs Hfsdpswgwl Djfx Ag Rjd

Kondisi: bekas, Tahun pembuatan: 1995, Spindle tiltable: Yes, -5° to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Fence adjustment: Manual Height display: Mechanical counter Swivel angle display: Mechanical counter Fence position display: Mechanical counter Spindle diameter: 30 mm (new spindle) Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5.5 kW Hedpfxsuzkwzj Ag Refd Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 1400 mm Weight: 900 kg

Kondisi: sangat baik (bekas), Maggi Boring System 35 Multi-Spindle Boring Machine Number of spindles: 35 Hjdpfx Ajvx Aqdjg Refd Spindle pitch: 32 mm Distance between first and last spindle: 1088 mm Maximum drilling depth: 85 mm Spindle speed: 2800 rpm Number of pneumatic clamps: 4 Operating pressure: 6–8 bar Air consumption per cycle: 15 l Number of motors: 2 × 1.5 kW Weight: 450 kg CE certificate

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Weight approx. 1,140 kg Connected load 380V 7.5 kW Scoring unit 0.75 kW, manually adjustable, can be raised and lowered via pneumatic connection Edging length 2,800 mm Hsdpfjq Au Huex Ag Rsfd Speeds 600/5,000/4,000/3,000 rpm via V-belt Electric tilting with digital indicator Electric height adjustment with digital indicator Cutting width 1,000 mm Rear support table 950 x 400 mm Miter fence 2,500 mm with extension to 2,840 mm and 2 stops Extraction connection 120 mm + 80 mm for PSV Parallel guard system with narrow and wide hood Edging fence Air requirement for the scorer: 6 bar connection

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Hedpfexdl Raex Ag Rjfd Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC