Empat Kolom Tekan - Hidrolik

Hidralmac 30 Tonnen Laborpresse

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Under-table press Pressing force: 300 kN Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Csdpfskuz T Uox Aa Togp Heating plate: solid steel heating plate Electrically heated up to 250°C Control: Siemens S7-1200 with 12" touch panel Mechanical safety gate Data recording

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Codjfxyhfopfx Aa Tegp Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide Csdpfx Aegpxc Sja Togp - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Cgsdsu Egp Iopfx Aa Tep Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Kondisi: baru, Schachtofen_VEI Cgjdpjg R Snhsfx Aa Tsp

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, The BP 800 is an automatic bundle packer. It can package products with a width of up to 760 mm and a height of up to 380 mm. - Semi-automatic bundle packer - Pneumatic ram - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80µm - Low energy consumption Cgjdpfewth Dqox Aa Top - Conforms to EU standards Technical Data Power supply: 380 V Output per minute: 10 packs Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download datasheet

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, also known as a panel saw with scorer. It is an ideal solution for cutting and processing various materials, primarily wood, chipboard, MDF, and other wood-based panels. Construction and Design: The Cormak MJ45-KB4 is a robustly constructed woodworking machine featuring a durable steel frame for stability during operation. The large work table rides on hardened steel rods, with a carriage length of 3200 mm, equipped with cutting units to ensure efficiency and accuracy. Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring unit, which pre-cuts the underside of the board to relieve internal stress within the wood. This prevents splintering and reduces the likelihood of material deformation after cutting. The scoring motor’s power of 0.75 kW ensures reliable scoring performance. Main Saw Blade: The Cormak MJ45-KB4 panel saw comes with a primary circular saw blade powered by an electric motor, enabling precise cuts through various materials. With a blade diameter of 350 mm, the maximum cutting height reaches up to 105 mm. Manual Scoring Adjustment: The straightforward and effective manual adjustment of the scoring unit allows for quick and accurate setup. Index stops make it easy to return to previous settings, while the intuitively located adjustment controls allow operators to make changes without interrupting workflow. Panel Saw Features: Large Working Surface: Equipped with a spacious working area, this panel saw enables comfortable handling of large material sheets. Smooth Carriage Travel: The feeding system uses precision-hardened steel guides with steel ball bearings for effortless longitudinal cutting, even with large panels or plywood sheets. Angle and Depth Adjustment: The cutting angle and cutting depth can be easily adjusted, allowing customization for specific project requirements. Safety Systems: The panel saw is fitted with safety features such as blade guards and emergency stop systems for safe operation. Applications: Panel saws with scoring units are mainly used in woodworking and window manufacturing workshops for cutting wood and wood-based materials. They are particularly suitable for cutting boards, chipboards, MDF panels, and similar materials. The Cormak MJ45-KB4 stands out for its high precision. Technical Specifications: Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width at rip fence: 1250 mm Cross-cutting capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Codpfxotz Smie Aa Tsgp Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade cutting height: 0-105 mm Saw blade cutting height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power (S1/S6): 5.5 kW / 9 HP Scoring motor power (S1/S6): 0.75 kW / 1.2 HP Main dust extraction port diameter under table: 100 mm Blade guard extraction port diameter: 80 mm Machine weight: 680 kg The saw is sold without cutting blades. Price does not apply to machines sold in Poland.

Kondisi: baru, Tahun pembuatan: 2026, Design your production facility to provide optimal ergonomics, efficiency, and profitability. Sheet metal from coil saves money, reduces waste, and frees up storage space. Whether your sheet metal workshop is large or small, we have the right solution for you. CIDAN Machinery offers a wide range of equipment that can be configured into an efficient, tailor-made production facility, where parameters such as performance, distance, time, and material accessibility are crucial for fast and cost-effective manufacturing. Csdpfxemfn Ics Aa Tegp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, panjang total: 2.700 mm, Oferuję nową maszynę do wielkoformatowych rozwiązań termoplastycznych do druku 3D. Sterowanie: Stäubli / Cead - Profinet pełna kontrola Robot: Stäubli TX200L - zasięg 2700 mm, ładowność 100 kg Ekstruder: Cead E25 o wydajności 12 kg/h Cjdpfx Aourvzrea Tjgp Suszarnia VIZMATEC 100l z automatycznym dozowaniem dla ciągłej produkcji. Do generowania trajektorii robota używany jest kod G-CODE/NC.

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height range: 95–240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 27 kg Dimensions (L x W x H): 160 x 230 mm Direct Acting Pneumatic Presses These presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke parts require processing with constant force. Outstanding Features: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-position cushioning on both sides Codpfx Aaefv Awas Tjgp • Double guide rings in the piston ensure smooth and consistent operation • Oil-resistant sealing elements Special Features of the PND Series: • Spindle secured against rotation • On the PND 85/S, spindle return is carried out via only one cylinder chamber—resulting in additional air savings • Fine adjustment of working height is easy, fast, and precise in two stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine-tuning via the stroke limitation ring on the piston rod Additional Advantage: Faster cycle times and air savings