Press hidrolik

Hidralmac 500T Säulenpresse

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 4303, Pressure: 500 t Passage width: 2100 x 1500 mm Stroke: 1000 mm Total power requirement: 62 kW Approx. machine weight: 39 t Dimensions (L x W x H): 5100 x 2800 x 4040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter (main cylinders): 360 mm Table size: 2100 x 1500 mm with T-slot Ram size: 2100 x 1500 mm Table height above floor approx.: 850 mm Approach speed: 300 mm/sec Return speed: 300 mm/sec (with 20T ram weight) Pressing speed: 200T = 28 mm/sec Oil tank: approx. 1000 l Auxiliary cylinders: 2 units Column diameter (auxiliary cylinders): 120 mm Total table plate size: approx. 2750 x 1600 mm Total ram plate size: approx. 2750 x 1600 mm Pressing speed: 300T = 20 mm/sec Pressing speed: 500T = 6 mm/sec Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance worktable – ram plate): 1500 mm Hydraulic manifold: REXROTH Pressure control: via PLC (minimum pressure 50T) Cylinders: 4 x ?90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector, approach speed: 95 mm/sec Ejector, return speed: 240 mm/sec Capacity: 4 x 15T at 250 bar Pressure setting: via monitor from 50-500T Pressure holding time: 0-900 sec Hydraulic tank: 2000 l Control system: Siemens S7 300 Storage capacity: 200 programs Electronics by German manufacturers: SIEMENS/MÖLLER Control panel: on swivel arm Sick light sensors: 1500 mm at front side Control function: The linear scale provides the control system with the position of the ram and the ejectors at all times. The travel path, the upper stop, and the switching point (where the press switches from rapid traverse to working speed) as well as the target end position can be easily and quickly entered via the monitor controls. Working speed can be set in increments of 1 mm/sec from 0 to 10 mm/sec and in increments of 10 mm from 10 to 300 mm/sec. Additionally, the machine is equipped with pressure monitoring, which can either retract the ram as soon as the desired pressure is reached or maintain the pressure for the pre-set time (with 5% tolerance) and then open. The control system monitors the protected areas, all hydraulics, the pumps, and the temperature. It also monitors the parallelism of the main cylinders and compensates for unilateral overload. The control system is housed in a separate control cabinet. Operation of the press is via a control panel mounted on a swivel arm, reducing operator movement. Additional equipment: Ljdpfx Ajdyynvjdnorh Polycarbonate glass 8 mm, inside at rear door Polycarbonate glass 8 mm, at side doors and within the working area Liquid run-off channel, 25 mm radius, at front, rear, and sides of the table Special features of the press: Including 10% reserve (max. capacity 550 t) Steel quality: Stainless steel LCG ASTM A36, manufactured according to DIN 8651 Motor and pump switch off as soon as the tool is closed and automatically recalibrate at 5% pressure drop (significant cost savings) Nitrogen compression system: Supplied with a nitrogen compression unit that can generate a sudden pressure of 280 bar and can be switched on and off as needed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Siemens control Bar capacity 32 mm Lrsdowh U Edjpfx Adnsh 2 x 12-station turrets with driven tools Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar feeder magazine

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) Ljdpfxeph Uk No Adnsrh - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, Tahun pembuatan: 2017, Robot industri, robot pelatihan Produsen: Kuka Tipe: KR3 R540 KRC4 Compact Tahun pembuatan: 2017/2018 Jam operasi sedikit! Sel pelatihan, sel pameran, sel demo: 800 mm x 1.000 mm Jangkauan: 541 mm Berat: 26 kg Lrodpfxowpg Nde Adneh Kapasitas angkut: 3 kg Kontrol Kuka KRC4 Compact KUKA.SystemSoftware KSS SR Kuka SmartPad KCP4 Kabel koneksi Kuka 4 m

Kondisi: bekas, Tahun pembuatan: 1965, Bore diameter 80 mm Stroke 280 mm Throat depth 300 mm Total power requirement 6 kW Lsdst Hwupjpfx Adnerh Machine weight approx. 2.6 t Max. honing diameter 10–100 mm Max. honing depth approx. 250 mm Max. spindle stroke 260 mm Throat depth 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Table height above floor 500 mm Spindle speeds steplessly adjustable approx. 85–300 rpm / 170–600 rpm Stroke speeds steplessly hydraulically adjustable 0–23 m/min Spindle drive 2 kW Total drive approx. 6 kW – 380 V – 50 Hz Weight approx. 2,600 kg Accessories / Special equipment: - Mounted 2-station swivel table for holding two workpieces with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device. - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We await your order. Other honing machines are constantly in stock – please inquire with us.

Kondisi: baik (bekas), Tahun pembuatan: 2012, jangkauan lengan: 2.696 mm, model controller: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data: Maximum Reach: 2,696 mm Rated Payload: 90 kg Rated Additional Load (Carousel / Wrist / Arm): 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Position Repeatability (ISO 9283): +/- 0.06 mm Number of Axes: 6 Mounting Position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1,058 kg Axis Data: Range of Motion: A1: +/- 185° A2: -140° / -5° A3: -120° / 155° A4: +/- 350° A5: +/- 125° A6: +/- 350° Lrjdpfxstpwxlo Adnoh Speed at Rated Payload: A1: 136°/s A2: 130°/s A3: 120°/s A4: 292°/s A5: 258°/s A6: 284°/s Operating Conditions: Ambient Temperature during Operation: 10°C to 55°C (283 K to 328 K) Controller: KR C4

Kondisi: baru, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Ljdpfx Aof Rt Irjdnorh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 210 kg, jangkauan lengan: 3.100 mm, Our industrial robots are thoroughly inspected, tested, and ready for immediate use before delivery. Lrsdswlz Dbspfx Adnsh Robot is complete with: - Control cabinet - Teach pendant - Connection cables

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ledpfx Adocubatsnsrh Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation - motorized ram adjustment - central grease lubrication (manual) - rupture disc - clamping plate - safe for manual loading/unloading - operating manual available

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Ljdpfxjd Ha E Sj Adnsrh Coil weight: 10 t Mandrel diameter: 508 mm