Mesin press uji coba

Hidralmac Tuschierpresse

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, gaya penekanan: 63 t, Pressure: 63 t Table length: 700 mm Table width: 1000 mm Machine weight approx.: 9 t Space requirements approx.: 4500 x 4300 x 2700 mm Main cylinder: 1 unit Gedpfsffamqjx Ah Rsbi Stroke length: 1200 mm Installation height: table/ram top: 1200 mm Table height: 700 mm Table extendable: by 1200 mm Table tiltable: by 45 degrees Upper tool foldable: by 170 degrees Clearance between columns: 1250 x 1000 mm Max. table load: 5 t Table traverse speed: 25 mm/sec Advance speed: 95 mm/sec Return speed: 80 mm/sec Working speed adjustable: from 0 to 10 mm/sec. The linear scale continuously communicates the ram position to the control system. The traverse path, the upper stop position, and the switching point at which the press changes from rapid traverse to working speed, as well as the target end position, can be easily and quickly entered via the monitor control. Working speed can be set in 1 mm/sec increments from 5 to 10, and in 10 mm increments from 10 to 95 mm. The control monitors the secured areas, the entire hydraulic system, and the pump. The control is housed in a separate control cabinet.

Kondisi: bekas, Tahun pembuatan: 1965, Bore diameter 80 mm Stroke 280 mm Throat depth 300 mm Total power requirement 6 kW Machine weight approx. 2.6 t Max. honing diameter 10–100 mm Max. honing depth approx. 250 mm Max. spindle stroke 260 mm Throat depth 300 mm Gsdpfxjt Hwupj Ah Rjbi Mounting height 1,000 mm Table size 350 x 500 mm Table height above floor 500 mm Spindle speeds steplessly adjustable approx. 85–300 rpm / 170–600 rpm Stroke speeds steplessly hydraulically adjustable 0–23 m/min Spindle drive 2 kW Total drive approx. 6 kW – 380 V – 50 Hz Weight approx. 2,600 kg Accessories / Special equipment: - Mounted 2-station swivel table for holding two workpieces with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device. - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We await your order. Other honing machines are constantly in stock – please inquire with us.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, nomor mesin/kendaraan: 4293, gaya penekanan: 40 t, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance between working plate and ram plate): 1200 mm Number of cylinders: 1 unit Stroke length: 1200 mm Table height above floor: 700 mm Extendable table: 1200 mm Table traverse speed: 25 mm/sec Table tilting: 45 degrees Maximum table load: 5 t Upper tool foldable: 170 degrees Distance between columns: 1250 x 1000 mm Maximum approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating materials): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm The columns and cylinder are made of tool steel SAE 1045 (equivalent to German standard C 45), hardened by induction and chrome-plated on the outside. Control system functionality: Gbodpfx Ahodxrqxe Rsi The linear encoder continuously provides the control system with the ram position. The traverse path, upper stop point and switching point (where the press transitions from rapid traverse to working speed), as well as the target end position, can be entered quickly and easily via the monitor control unit. The working speed can be set in 1 mm increments from 0 to 10 mm/sec and in 10 mm increments from 10 to 155 mm/sec. The control system monitors all safeguarded areas, the complete hydraulics, and the pump, and is housed in a separate control cabinet. The press itself is operated via a control panel mounted on a swivel arm, minimizing walking distances. Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself - CE Declaration. The machine complies with the EU Machinery Directive 2006/42/EC. Hydraulic presses

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 40 t, We offer a hydraulically operated spotting press with 40 tons of pressing force, available for immediate delivery. Due to a change in warehouse location, this press is being offered at a very attractive price. Press force: 40 t Table length: 1000 mm Table width: 700 mm Machine weight: approx. 9 t Space requirement: approx. 4000 x 4400 x 1800 mm Stroke length: 1050 mm Installation height: 1200 mm Table rotatable by 180 degrees Max. table load: 5 t Advance speed: 100 mm/sec Return speed: 100 mm/sec Working speed adjustable from 0 to 10 mm/sec Main cylinder: 1 unit Table extendable by 1050 mm Table tiltable up to 50 degrees Upper tool foldable by 180 degrees Table traverse speed: 25 mm/sec Press force, travel and speed adjustable via monitor control Robust machine body with solid welded construction, produced to DIN 8651 for low-maintenance and reliable operation via heavy-duty engineering Maintenance balcony with marine ladder Complete travel area secured by Sick light curtains Table extends forward from the machine and can be tilted up to 45 degrees upon request Control cabinet on the left side of the machine Monitor control with 200 memory slots REMOTE function for remote maintenance Operating manual, technical documents, and documentation in German CE certificate SIEMENS 9" monitor Motors by WEG Hydraulics by Bosch Rexroth Gedpfx Ahehtm E Ne Rsbi Internal illumination Operator panel on a swing arm Two-hand operation on a movable stand USB interface for data transfer Control system by Siemens Sick light sensors, 1250 mm Platen hydraulically foldable, swivels up to approx. 175 degrees Columns and cylinders are made from tool steel SAE 1045 (identical to DIN C45), induction-hardened and chrome-plated on the exterior. The linear encoder continually informs the control system of the ram position. Travel distance, upper stop, switch-over point (where the press changes from rapid approach to working speed), and the desired end position can be easily and quickly entered via the monitor control. Working speed can be set in 1 mm/sec increments from 0 to 10 mm/sec and in 10 mm/sec steps from 10 to 155 mm/sec. The control system monitors protected areas as well as the entire hydraulic circuit and pump. The control unit is housed in a separate control cabinet. The press itself is operated via a control panel mounted on a swivel arm, allowing for reduced operator movement.

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 1,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm C-axis: 360° x 0.001° A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain type, 180 positions Total power requirement: 85 kW Machine weight approx. 20.5 t Gbodpfx Ahew E Nnne Rsi Space requirements approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary-swivel table Rotoclear window Probe interface prepared Blum laser tool measurement Vibration sensor Tool taper cleaning Operating mode 4 IKZ (internal coolant supply) with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling / heating unit

Kondisi: baik (bekas), Tahun pembuatan: 2012, jangkauan lengan: 2.696 mm, model controller: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data: Maximum Reach: 2,696 mm Rated Payload: 90 kg Rated Additional Load (Carousel / Wrist / Arm): 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Position Repeatability (ISO 9283): +/- 0.06 mm Number of Axes: 6 Mounting Position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1,058 kg Gjdpfx Ahjtpwxls Robi Axis Data: Range of Motion: A1: +/- 185° A2: -140° / -5° A3: -120° / 155° A4: +/- 350° A5: +/- 125° A6: +/- 350° Speed at Rated Payload: A1: 136°/s A2: 130°/s A3: 120°/s A4: 292°/s A5: 258°/s A6: 284°/s Operating Conditions: Ambient Temperature during Operation: 10°C to 55°C (283 K to 328 K) Controller: KR C4

Tahun pembuatan: 1999, Kondisi: bekas, Tractive force – max. 6.0 t Ram stroke – max. 1,250 mm Space requirement approx. 1.20 x 1.20 x 3.25 m Gedpjd Il A Nsfx Ah Rjbi

Kondisi: bekas, Tahun pembuatan: 2017, Jam kerja menyala: 51.800 jam Jam program berjalan: 15.100 jam Data teknis: Lintasan/sumbu: X = 800 mm Gsdpfoxqp Ivjx Ah Rjbi Y = 850 mm Z = 1.050 mm B = 360°, 0,001° Putaran maks.: 12.000 1/menit Daya total terpasang: 77 kVA Kebutuhan ruang (PxLxT): 9.000 x 5.500 x 4.000 mm Berat: 18.100 kg Perlengkapan: - Siemens 840D - Handwheel elektronik - Paket pemesinan berat - Penukar alat, majalah roda 180 posisi - Dudukan alat HSK 100 - Papan kontrol - Pendinginan internal - Pengukuran dan monitoring Renishaw, TDS inframerah, MPC

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Gsdpfx Ajwh U D Hjh Rebi Spindle speed: 5,000 rpm 2 x 12-position turrets with driven tools Turret 1 with Y-axis Parts catcher Belt filter system Chip conveyor IRCO Profimat bar loader

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Gjdpsd Ha E Ssfx Ah Rjbi Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Mandrel diameter: 508 mm