Contoh pers

Hidralmac Tuschierpresse

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: 4273, gaya penekanan: 110 t, Pressure: 110 t Table length: 1,200 mm Table width: 1,000 mm Max. stroke: 1,150 mm Dimensions (L x W x H): 4,200 x 2,400 x 4,800 mm Return force: 11 t Max. stroke: 1,150 mm Weight: 16 t Table travel: 1,200 mm Swivel table: 45 degrees Max. table load: 12 t Movable table speed: 25 mm/sec Table swivel speed: 10 mm/sec Drive power: 23 kW Voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Return speed: 130 mm/sec Rapid traverse speed: 195 mm/sec Machine color: Grey RAL 7035 Movable component color: Orange RAL 2009 Other component color: Dark grey RAL 7021 Gbodpfjd Ap Ugex Ah Rsi Oil tank: 400 l Recommended oil: DIN HLP / ISO VG 46

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Description Manufacturer: Mitutoyo Model: CV-500 The contracer comes complete with PC, software, monitor, and vise. Gsdpjtxyv Isfx Ah Rsbi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2015, nomor mesin/kendaraan: 4293, gaya penekanan: 40 t, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance between working plate and ram plate): 1200 mm Number of cylinders: 1 unit Stroke length: 1200 mm Table height above floor: 700 mm Extendable table: 1200 mm Table traverse speed: 25 mm/sec Table tilting: 45 degrees Gedpfx Ahjdxrqxs Robi Maximum table load: 5 t Upper tool foldable: 170 degrees Distance between columns: 1250 x 1000 mm Maximum approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating materials): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm The columns and cylinder are made of tool steel SAE 1045 (equivalent to German standard C 45), hardened by induction and chrome-plated on the outside. Control system functionality: The linear encoder continuously provides the control system with the ram position. The traverse path, upper stop point and switching point (where the press transitions from rapid traverse to working speed), as well as the target end position, can be entered quickly and easily via the monitor control unit. The working speed can be set in 1 mm increments from 0 to 10 mm/sec and in 10 mm increments from 10 to 155 mm/sec. The control system monitors all safeguarded areas, the complete hydraulics, and the pump, and is housed in a separate control cabinet. The press itself is operated via a control panel mounted on a swivel arm, minimizing walking distances. Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself - CE Declaration. The machine complies with the EU Machinery Directive 2006/42/EC. Hydraulic presses

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 40 t, We offer a hydraulically operated spotting press with 40 tons of pressing force, available for immediate delivery. Due to a change in warehouse location, this press is being offered at a very attractive price. Press force: 40 t Table length: 1000 mm Table width: 700 mm Machine weight: approx. 9 t Space requirement: approx. 4000 x 4400 x 1800 mm Stroke length: 1050 mm Installation height: 1200 mm Gbodpfehtm E Nex Ah Rsi Table rotatable by 180 degrees Max. table load: 5 t Advance speed: 100 mm/sec Return speed: 100 mm/sec Working speed adjustable from 0 to 10 mm/sec Main cylinder: 1 unit Table extendable by 1050 mm Table tiltable up to 50 degrees Upper tool foldable by 180 degrees Table traverse speed: 25 mm/sec Press force, travel and speed adjustable via monitor control Robust machine body with solid welded construction, produced to DIN 8651 for low-maintenance and reliable operation via heavy-duty engineering Maintenance balcony with marine ladder Complete travel area secured by Sick light curtains Table extends forward from the machine and can be tilted up to 45 degrees upon request Control cabinet on the left side of the machine Monitor control with 200 memory slots REMOTE function for remote maintenance Operating manual, technical documents, and documentation in German CE certificate SIEMENS 9" monitor Motors by WEG Hydraulics by Bosch Rexroth Internal illumination Operator panel on a swing arm Two-hand operation on a movable stand USB interface for data transfer Control system by Siemens Sick light sensors, 1250 mm Platen hydraulically foldable, swivels up to approx. 175 degrees Columns and cylinders are made from tool steel SAE 1045 (identical to DIN C45), induction-hardened and chrome-plated on the exterior. The linear encoder continually informs the control system of the ram position. Travel distance, upper stop, switch-over point (where the press changes from rapid approach to working speed), and the desired end position can be easily and quickly entered via the monitor control. Working speed can be set in 1 mm/sec increments from 0 to 10 mm/sec and in 10 mm/sec steps from 10 to 155 mm/sec. The control system monitors protected areas as well as the entire hydraulic circuit and pump. The control unit is housed in a separate control cabinet. The press itself is operated via a control panel mounted on a swivel arm, allowing for reduced operator movement.

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole, 100 - 200 mm Plate diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotational speed: 0.11 - 1.25 rpm Weight: 750 kg Gjdpfjhua Dqox Ah Rjbi Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: bekas, Pressing force 160 t Passage width / mm Gbsdpfx Ajiulkqeh Rsi Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance table/ram, large stroke top, adjustment top: 800 mm Additional information Extendable table

Kondisi: bekas, Tahun pembuatan: 2007, TECHNICAL DATA Travel X-axis: 760 mm Travel Y-axis: 510 mm Travel Z-axis: 610 mm Table clamping surface: 1020 x 510 mm T-slots / table: 5 x 18 mm x 100 mm Distance spindle to table min./max.: 150/762 mm Spindle taper: steep taper DIN 69871 ISO 40 Spindle speeds: 10–10,000 rpm Drive power (30 min/continuous duty): 11 kW Gbodpowud Afsfx Ah Rei Max. torque: 236 Nm Constant power from 500 rpm Coolant tank: 190 l Ball-bearing linear guides in X, Y, Z axes Rapid traverse X / Y / Z: 30 / 30 / 20 m/min Feed rates, programmable: 3.0 – 7,600 mm/min Positioning accuracy: +/- 0.01 mm Repeatability: +/- 0.005 mm Automatic tool changer (double arm): 24 Internal coolant supply Chip conveyor

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel path Z: 150 mm - Travel path X: 225 mm Gbedpfx Aouha Umoh Rsi - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel path X/Y: 97/133 mm SUBSEQUENT MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 6 kW DIMENSIONS AND WEIGHT - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control system: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Kontrol Winmax Perjalanan sumbu X/Y/Z: 1060 x 610 x 610 mm Majalah alat untuk 24 alat, SK 40 Gbodpfjx Ddgtjx Ah Rei Kecepatan spindle 12.000 min-1 Sumbu ke-4 Kitagawa Konveyor serbuk

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Protec KT 1200 kg Welding Turntable Motorized, infinitely variable tilt and speed control Motor: 0.75 kW Includes remote control Foot switch Table diameter: 1200 mm Gbjdpjcrmyfefx Ah Roi Height: 1000 mm Length: 1400 mm Width: 1500 mm Speed range: 0.05 to 0.5 rpm