Produktionspresse

Hidralmac Viersäulenpresse

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 4303, gaya penekanan: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from Hidralmac with a pressing force of 500 t. This machine is designed for demanding forming processes in continuous industrial operation. Thanks to its multi-cylinder technology, high dynamics, and extensive control and monitoring functions, it provides a precise and powerful solution for complex applications. ==== Technical Data & Information: Hydraulic Four-Column Press – 500 t ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic column press - Machine designation: Forming press - Pressing force: 500 t (max. 550 t with reserve) - Machine weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Pass-through width: 2,100 × 1,500 mm - Installation height: 1,500 mm - Stroke: 1,000 mm - Table height above ground: approx. 850 mm ==== Table & Ram - Table size: 2,100 × 1,500 mm (with T-slots) - Ram size: 2,100 × 1,500 mm - Total table plate size: approx. 2,750 × 1,600 mm - Total ram plate size: approx. 2,750 × 1,600 mm ==== Speeds - Approach speed: 300 mm/s - Return speed: 300 mm/s - Pressing speed: - 200 t: 28 mm/s - 300 t: 20 mm/s Crsdpfx Aksdyynveash - 500 t: 6 mm/s ==== Hydraulics & Drive - Total power requirement: 62 kW - Return force: 40 t - Main cylinders: 2 units - Auxiliary cylinders: 2 units - Axial piston pump: Bosch Rexroth A4VSO125 (approx. 290 l/min) - Hydraulic block: Rexroth - Oil tank volume: approx. 2,000 l - Pressure control via PLC (min. 50 t) - Pressure hold time: 0–900 sec - Energy-saving via automatic pump shut-off at tool closure ==== Ejector & Auxiliary Systems - Ejector: 4 × 15 t at 250 bar - Ejector stroke: 300 mm (PLC adjustable) - Ejector speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor control with programmable pressure and travel - Storage capacity: up to 200 programs - Electronics: Siemens / Möller - Operator panel on swivel arm - Voltage: 400 V / 50 Hz - Control voltage: 24 V ==== Safety & Monitoring - Light sensors from SICK (1,500 mm, front side) - Monitoring of hydraulics, pumps, and temperature - Synchronous monitoring of main cylinders with automatic adjustment - Pressure monitoring with automatic return or hold function (± 5 %) ==== Construction & Features - Column diameter main cylinder: 360 mm - Column diameter auxiliary cylinder: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - Polycarbonate safety glazing (8 mm) in the work area and on doors - Liquid channel surrounding the table (25 mm radius) ==== Auxiliary System - Nitrogen compression system (up to 280 bar, can be activated) ===== Forming technology, heavy forming, series production, large part machining, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, forming press, industrial press, production press

Kondisi: baru, Saw blade diameter: 370 mm Ceded Iin Hspfx Akajrh Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, gaya penekanan: 400 t, HIDRALMAC Four-Column Hydraulic Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Drawing Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC, offering pressing force up to 400 t. This machine is specifically designed for demanding deep drawing and forming applications, featuring a powerful drawing cushion along with advanced control and safety technology. Due to its robust construction and comprehensive equipment, it is an ideal solution for industrial series production and complex forming tasks. ==== Technical Data & Details: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine type: Deep Drawing Press - Design: Four-column press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Daylight width: 2,500 mm - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Slide - Table size: 2,500 × 1,600 mm - Slide size: 3,100 × 1,600 mm - Column diameter: 220 mm - Return force: 40 t - T-slots: according to DIN 650-22 (customizable) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Drawing Unit - Drawing cushion: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW Cjdpfsin Et Nex Akaorh - Oil tank: 1,500 l - Oil volume: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure build-up: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Controls & Operation - Control system: Siemens - Monitor: Siemens 12" - Modes of operation: manual, semi-automatic, fully automatic - Travel control adjustable via monitor - Remote monitoring/maintenance - Two-hand operation on movable stand - Wall-mounted electrical cabinet ==== Safety & Equipment - Safety PLC for hydraulic block monitoring - Front and rear light sensors: SICK (1,300 mm) - Side safety doors left and right (1,000 × 800 mm each) - Interior LED lighting - Energy monitoring system (idle load reduction to approx. 2 kW) ==== Construction - Sturdy welded steel structure - Machine steel: ASTM A36 - Induction-hardened and chrome-plated piston rods - Low maintenance and reliable - CE certificate - Documentation in German ==== Deep Drawing, Forming Technology, Series Production, Sheet Metal Forming, Toolmaking Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Looking for a hydraulic press customized to your application? Contact us for a tailored offer. Our core strength is special purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we use mainly components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0152, gaya penekanan: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) manufactured by HIDRALMAC with a press force of 80 t. This machine is designed for drawing and forming processes and is equipped with an integrated deep drawing cushion as well as state-of-the-art control and safety technology. Thanks to its compact design and robust components, it is ideal for small-batch production, toolmaking, and precise forming operations. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 80 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine type: Deep Drawing Press - Design: Four-column press - Press force: 80 t - Machine weight: approx. 5.1 t - Total power requirement: 12 kW - Operation: Two-hand control - Main cylinder: 1 unit ==== Working Area - Working area: 800 × 800 mm - Table size: 800 × 800 mm - Working height: 800 mm - Table height: 800 mm - Stroke: 500 mm - Traverse path: 700 mm ==== Table & Slide - Ram plate: 2,800 × 1,300 mm - Column diameter: 75 mm ==== Speeds - Approach speed: 9.8 mm/sec - Working speed: 9.8 mm/min - Return speed: 18 mm/sec ==== Deep Drawing Unit - Deep drawing cushion force: 25 t (at 280 bar) Crodsfxyh Hepfx Akaeh - Cushion stroke: 200 mm - Rod diameter: 30 mm - Cushion speed: 80 mm/sec - Deep drawing motor: 10 kW ==== Hydraulics & Performance - Main motor: WEG 15 kW - Pump: Rexroth / Parker axial piston pump - Hydraulic block and valves: Rexroth / Parker - Hydraulic tank: 300 l (oil requirement approx. 250 l) - Auxiliary oil tank: 150 l - Hydraulic pressure control: via PLC (from 10 t) - Air cooling with electric fan - Lubrication: manual via grease nipple or cartridges ==== Control & Operation - Control: Siemens / Moeller - Operating modes: automatic, semi-automatic, manual (set-up mode) - Control panel on swivel arm - Movable two-hand operation - USB interface for data transfer - Remote monitoring (Siemens remote maintenance) - Distance holder sensors for stroke length adjustment - Pressure hold function: 0–10 sec ==== Safety & Equipment - Light curtains front and rear (Schmersal, 800 mm) - Additional diagonal protection at the lower area - Hydraulic safety monitoring ===== Drawing, forming, small series production, toolmaking, sheet metal processing Hydraulic press, hydraulic press, deep drawing press, four-column press, deep-drawing press, forming press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they conform to all aspects of the national Brazilian safety standard NR 12, which is based on these standards. Our core strength is in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses use predominantly components from leading European manufacturers.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Return speed: 330 mm/s Codov Rwu Ujpfx Akajrh Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), two-hand operation

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 160 t, HIDRALMAC Four-Column Press – 160 t – 1,200 × 800 mm – Tryout Press For sale is a hydraulic four-column press (tryout press) from HIDRALMAC with a pressing force of 160 t. This machine is ideal for tool testing, die fitting, and small batch production. Its compact design, precise controllability, and robust construction provide a reliable solution for workshop and production environments. ==== Technical Data + Information: Hydraulic Four-Column Press – Tryout Press – 160 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Type: Tryout Press - Design: Four-Column Press - Pressing Force: 160 t - Machine Weight: approx. 7 t - Total Power Requirement: 7.5 kW - Main Cylinder: 1 piece ==== Working Area - Installation Height: 800 mm - Stroke: 600 mm - Table Height: 850 mm - Lateral Column Spacing: 400 mm ==== Table & Load - Table Surface: 1,200 × 800 mm Csdpfxsfxyi Is Akajrh - Max. Table Load: 5 t - Return Force: 16 t ==== Speeds - Approach Speed: 1–9.8 mm/sec - Return Speed: 1–9.8 mm/sec ==== Hydraulics & Operation - Oil Volume: approx. 220 l (AW 46) - Robust and low-maintenance hydraulic design ==== Construction & Features - Column Diameter: 160 mm - Compact design for flexible use - Suitable for die fitting and tryout work ===== Die fitting, tryout work, small batch production, toolmaking, forming technology Hydraulic press, hydraulic press, tryout press, four-column press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements by fully complying with the Brazilian national safety directive NR 12, which is based on these standards. Our greatest strength is special-purpose machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are mainly equipped with components from leading European manufacturers.

Kondisi: bekas, nomor mesin/kendaraan: 4396, gaya penekanan: 200 t, en-GB-1 Cjdpfsfxyh Ajx Akajrh

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 750 mm, lebar meja: 1.500 mm, panjang meja: 850 mm, kecepatan rotasi (maks.): 2.500 rpm, gores kuas bulu: 120 mm, SHW UF 5 Travel Paths • X-axis (rotary table): 1,500 mm • Y-axis (vertical spindle head): 1,000 mm • Z-axis (horizontal spindle head): 750 mm Control System • CNC Control: Heidenhain TNC 355 Automatic Swivel Head (change between horizontal and vertical machining) Quill 120 mm Milling spindle taper: SK 50 Spindle speed: 2,500 rpm Partial Overhaul 2014 • Year of manufacture: 1990 Crsdpevfm I Tofx Akash • Inspection/Refurbishment: 2025 Table Assembly • Travel: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip Conveyor Enclosed Splash Guard Cabin For this model series (SHW UF 5), we have ALL spare parts in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in tool milling machines. Our services include, among others, spare part supply, on-site customer service, machine overhauls, and control system retrofits. Our Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used bed milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drilling/milling machine - used metal milling machine - used metal mill - used cnc mill - cnc milling machines - cnc bed milling machine - large part machining - CNC large scale machining - milling - SHW - UF5 - UF 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 1,500 mm Y travel: 1,000 mm Z travel: 1,000 mm CNC control: TNC 530 Cedpfx Akju Nc Rioajrh Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4,000 / stepless rpm Tool holder horiz./vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1,000 Nm Swiveling spindle head left and right: 90° Feed rate: 1 - 6,000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping table surface L x W: 1,600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. LxWxH: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. LxWxH: approx. 38.5 m² Applications: Milling, drilling, tapping, boring with direct encoded linear measurement systems The guides of all 3 axes are flat guideways Milling head position controlled +/-90° ICS (internal coolant supply) and external cooling Milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar working pressure with coolant unit, high-pressure pump 60 bar (internal cooling), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external cooling), as well as spray gun Compact band filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Cjdsmf Aw Aspfx Akaorh