Deep-drawing press

HIDRALMAC Viersäulenpresse

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 160 t, Pressure: 160 t Stroke: 600 mm Total power requirement: 7.5 kW Machine weight approx.: 7 t Return force: 16 t Main cylinder: 1 unit Column diameter: 160 mm Installation height: 800 mm Table area: 1200 x 800 mm Column distance (lateral): 400 mm Table height: 850 mm Max. table load: 5 t Forward speed: 1 to 9.8 mm/sec Return speed: 1 to 9.8 mm/sec Oil quantity AW 46: 220 l Gjdpfx Ajfxyi Ish Rjbi

Kondisi: bekas, Tahun pembuatan: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t OFFER We can offer you, subject to prior sale and errors, ex stock, without obligation: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Type JF 520 MS Year of manufacture 1985 2225 _____ Maximum grinding length (table longitudinal travel 600 mm): 600 mm Maximum grinding width (cross travel max. 230 mm): 200 mm Maximum grinding height under wheel approx.: 230 mm Max. distance table – spindle center: 500 mm Magnetic chuck size: 500 x 200 mm Maximum table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep-feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical traverse speed: 500 mm/min Gedpfewd Tx Usx Ah Rjbi Grinding wheel dimensions: 250 x 25 x 50.8 mm Maximum circumferential speed (ceramic): 35 m/s Infinitely variable grinding spindle speed: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special features • Microprocessor program control (SIEMENS) with simple on-screen display. Program sequences are set via decade switches and stops (with vernier scale) and monitored on the screen. • Programs: Plunge grinding with/without cross positioning, surface grinding with stepwise or continuous cross movement, creep-feed grinding in up-cut or down-cut mode with/without cross positioning. All programs with automatic rough/grind/finish cycles and automatic return. • Automatic straight dressing device AF 65 S with automatic compensation of the dressing value and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted over the grinding wheel • Electrically controlled creep-feed device with feed rate and motor load display. • Short-stroke device for table reversal and table clamping "crossways" • Swiveling JUNG sine magnetic chuck 450 x 180 mm, mounted. Separate swiveling sine magnetic chuck 350 x 175 mm, fine-pole, with stop. • Coolant system with paper band filter, additional accessories, operating instructions Condition: Very good condition, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery : ex stock, available immediately, FCA Metzingen Payment : strictly net - upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0152, gaya penekanan: 80 t, Pressure: 80 t Stroke: 500 mm Total power requirement: 12 kW Approx. machine weight: 5.1 t Operation: Two-hand control Cylinders: 1 Working height: 800 mm Working area: 800 x 800 mm Table size: 800 x 800 mm Ram plate: 2800 x 1300 mm Table height: 800 mm Approach speed: 9.8 mm/sec Working speed: 9.8 mm/min Return speed: 18 mm/sec Travel distance: 700 mm Column diameter: 75 mm Deep drawing function motor: 10 kW Main motor: WEG 15 kW Pump: REXROTH, Parker electronic axial piston pump kW Deep drawing cushion force: 25 t (at 280 bar) Deep drawing cushion stroke: 200 mm Deep drawing cushion rod diameter: 30 mm Deep drawing cushion travel speed: 80 mm/sec Hydraulic block: REXROTH/Parker Hydraulic valves: REXROTH/Parker Hydraulic tank: 300 L Hydraulic tank oil requirement: approx. 250 L Hydraulic pressure regulation: via PLC (minimum pressure 10 t) Hydraulic air cooling: for oil cooling, with electric fan Hydraulic lubrication for guides: manual, via lubrication nipples or cartridges Electronic components: SIEMENS / MOELLER Control panel: on swivel arm Control: automatic via two-hand operation with key switch, manual via operator panel in setup mode Operation: movable two-hand control USB interface: for data transfer Remote monitoring: Siemens for remote maintenance Spacer sensors: for stroke length adjustment Pressure hold: 0–10 sec. Oil tank: 150 L Schmersal light curtains: 800 mm long, front and rear, 300 mm diagonally at the bottom Gbedpfxsfxyh Ho Ah Rsi

Kondisi: bekas, nomor mesin/kendaraan: 4396, gaya penekanan: 200 t, en-GB-1 Gjdpfx Ahofxyh As Rjbi

Kondisi: diremajakan ulang (bekas), Druck: 150 t Gsdjgd H Tpspfx Ah Rjbi Stößelhub: 140 mm Tischgröße: 510 x 530 mm

Kondisi: bekas, Tahun pembuatan: 2017, gaya penekanan: 500 t, Pressure: 500 t Pass-through width: 1300 x 800 mm Stroke: 600 mm Approx. machine weight: 18 t Space requirement approx.: 2400 x 2400 x 5500 mm Return force: 50 t Operation: Two-hand control Cylinders: 1 piece Motor: 50 kW Oil cooling: electric Column diameter: 200 mm Working height (distance between ram & table plate): 700 mm Table size: 1900 x 800 mm Table height above floor approx.: 1000 mm Ram plate: 1300 x 800 mm Approach speed: 150 mm/sec Working speed: 5–10 mm/sec Return speed: 150 mm/sec Oil tank: 1500 l Oil quantity: 1400 l Control system functionality: The linear scale continuously communicates the position of the ram and ejector to the control unit. The travel path, upper stop point, and the switching point at which the press changes from rapid traverse to working speed—along with the target end position—can all be easily and quickly input via the monitor control. The working speed can be set in 1 mm/sec increments from 2 to 15 mm, and in 10 mm increments from 15 up to 150 mm. Additionally, the machine features pressure monitoring, which can either automatically return the ram to the upper position upon reaching the desired pressure, or maintain pressure at the set value (with ±5% tolerance) for a configurable time before opening. The control system monitors all safety zones, the complete hydraulics, the pumps, and the temperature. It also controls the synchronization of the main cylinders and compensates for uneven loads accordingly. The control is housed in an attached electrical cabinet. Operation of the press itself is performed via an adjustable two-hand control, reducing operator movements. Further information: Included in the offer are detailed 3D drawings, which must be checked and approved by the customer. Columns and cylinders are made of tool steel, induction hardened and chrome plated on the outside. Ram guides are manufactured using bronze sliding bushings. Scope of delivery includes: ? Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE Declaration of Conformity (each in duplicate) Godpfjd E Irmox Ah Rsbi ? Safety inspection by a qualified company ? The machine complies with the EU Machinery Directive 2006/42/EC for hydraulic presses and with DIN EN 693/2011

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 4303, gaya penekanan: 500 t, Pressure: 500 t Passage width: 2100 x 1500 mm Stroke: 1000 mm Total power requirement: 62 kW Approx. machine weight: 39 t Dimensions (L x W x H): 5100 x 2800 x 4040 mm Retraction force: 40 t Main cylinders: 2 units Column diameter (main cylinders): 360 mm Table size: 2100 x 1500 mm with T-slot Ram size: 2100 x 1500 mm Table height above floor approx.: 850 mm Approach speed: 300 mm/sec Return speed: 300 mm/sec (with 20T ram weight) Pressing speed: 200T = 28 mm/sec Oil tank: approx. 1000 l Auxiliary cylinders: 2 units Column diameter (auxiliary cylinders): 120 mm Total table plate size: approx. 2750 x 1600 mm Total ram plate size: approx. 2750 x 1600 mm Pressing speed: 300T = 20 mm/sec Pressing speed: 500T = 6 mm/sec Ram retraction force: 40 t Control circuit voltage: 24 V Voltage: 400 V Frequency: 50 Hz Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min Installation height (distance worktable – ram plate): 1500 mm Hydraulic manifold: REXROTH Pressure control: via PLC (minimum pressure 50T) Cylinders: 4 x ?90 x 70 mm Stroke length: 300 mm, adjustable via PLC Ejector, approach speed: 95 mm/sec Ejector, return speed: 240 mm/sec Capacity: 4 x 15T at 250 bar Pressure setting: via monitor from 50-500T Pressure holding time: 0-900 sec Hydraulic tank: 2000 l Gbodpfxjdyynvs Ah Rsi Control system: Siemens S7 300 Storage capacity: 200 programs Electronics by German manufacturers: SIEMENS/MÖLLER Control panel: on swivel arm Sick light sensors: 1500 mm at front side Control function: The linear scale provides the control system with the position of the ram and the ejectors at all times. The travel path, the upper stop, and the switching point (where the press switches from rapid traverse to working speed) as well as the target end position can be easily and quickly entered via the monitor controls. Working speed can be set in increments of 1 mm/sec from 0 to 10 mm/sec and in increments of 10 mm from 10 to 300 mm/sec. Additionally, the machine is equipped with pressure monitoring, which can either retract the ram as soon as the desired pressure is reached or maintain the pressure for the pre-set time (with 5% tolerance) and then open. The control system monitors the protected areas, all hydraulics, the pumps, and the temperature. It also monitors the parallelism of the main cylinders and compensates for unilateral overload. The control system is housed in a separate control cabinet. Operation of the press is via a control panel mounted on a swivel arm, reducing operator movement. Additional equipment: Polycarbonate glass 8 mm, inside at rear door Polycarbonate glass 8 mm, at side doors and within the working area Liquid run-off channel, 25 mm radius, at front, rear, and sides of the table Special features of the press: Including 10% reserve (max. capacity 550 t) Steel quality: Stainless steel LCG ASTM A36, manufactured according to DIN 8651 Motor and pump switch off as soon as the tool is closed and automatically recalibrate at 5% pressure drop (significant cost savings) Nitrogen compression system: Supplied with a nitrogen compression unit that can generate a sudden pressure of 280 bar and can be switched on and off as needed.

Kondisi: baik (bekas), WEBER pipe extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Godpfx Ahovryhye Rjbi Battenfeld V125

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gbjdpfx Ahemxkdpo Rsi Gouging.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Mesin Bubut CNC Doosan Puma 700 M II Kontrol: Siemens Sinumeric 828 Tahun pembuatan: 2022 Panjang pembubutan: 1.600 mm Diameter pembubutan: 900 mm Perjalanan sumbu X: 470 mm Perjalanan sumbu Z: 1.650 mm Kecepatan putar: 3 – 1.500 rpm Revolver alat: 12 posisi (semua digerakkan) Pemegang alat: BMT 85P Perlengkapan: Lunette self-centering Conveyor serbuk Touchsetter Chuck 3 rahang Tailstock dapat diprogram Gbodpfx Aoyk Tdish Rji Unit penyedot Pompa coolant 20 bar dengan filter siklon Penghisap kabut oli