Pers pelurus

Hidrobrasil 200 Tonnen Richtpresse Wellenrichtpresse

Kondisi: baru, Tahun pembuatan: 2024, it_en_001 Iajdsfh R N Depfx Aa Nel

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), A CNC turret punch press Amada for medium format sheets is available, including a loading unit MP300 M, Wilson X-Sharp grinding machine, and numerous standard and special punching tools. 1) CNC Turret Punch Press Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. Iaedowhp N Dopfx Aa Njl 2) Automatic Sheet Loading and Unloading System Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stack height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Tool Grinding Machine Wilson X-Sharp. Documentation available. On-site inspection is possible.

Tahun pembuatan: 2021, Kondisi: baru, VEI shaft furnace Model: VEI_SCO_EB Iasdpsg R Snhjfx Aa Nel Clear internal height: 1200 mm Clear internal diameter: 1400 mm External diameter: 2200 mm External height (without lid): 1650 mm External height (with lid): 2600 mm Electrically heated: 64.5 kW Circulation fan: 5.5 kW Three-phase connection: 400 V, 50 Hz Temperature: max. 750°C

Tahun pembuatan: 2021, Kondisi: baru, TECHNICAL DATA Iodpfx Asg Dgymja Nsal Type: Gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, with soundproof cabin Ijdji An Ttspfx Aa Noal Table surface 1000x550 mm, ram surface 1000x450 mm

Kondisi: baru, Tahun pembuatan: 2019, Pressure: 275 t Distance between uprights: 3,000 mm Total power requirement: 30 kW Ijdpsfxyigefx Aa Noal Approx. machine weight: 40 t Retracting force: 27 t Max. pump capacity: Axial pump with proportional valve Bridge travel: 6,000 mm Lateral cylinder travel range: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Max. distance from table to ram: 1,100 mm Oil tank: 450 l Bridge traverse speed (X and Y): 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder traversed by servomotor via rack and pinion: 40 mm Control system: Siemens S7 1200 Monitor: Siemens 9", Touch Panel Control console: portable

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Portal-type straightening press with 400 T capacity Oil-hydraulic double-column press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000 x 3000 mm d) Daylight (open height) 1500 mm e) Overall dimensions approx. L x W x H 6000 x 5000 x 4500 mm f) Oil temperature display on reservoir g) Lubrication via grease nipples h) Table in grid (raster) construction i) Controls mounted on swing arm attached to the bridge j) Pressure adjustment from 60 T to 400 T via MONITOR k) Bridge traverses via two gear motors, operated by rack and pinion l) Cylinder moves left and right via rack and pinion Iedohyc Nwepfx Aa Noal m) Machine frame powder-coated and/or double-painted n) T-slots as per customer specification o) Cylinder induction-hardened GANTRY PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 sides Forces Maximum pressing force: 4000 kN Maximum stripping force: 600 kN Pressure build-up time (closed die, steel-on-steel): max. 3 sec Dimensions Maximum opening width: 1500 mm Stroke and minimum opening: 1500 mm / 0 mm Table height above floor: approx. 900 mm Total height above floor (installation height): approx. 4500 mm Minimum hall height: 5500 mm Deflection Measured at max. closing force with 70% load:

Kondisi: baru, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm Iasdeilvb Nopfx Aa Nel - Movable cylinder - Electric or manual operation - Pressure gauge - Emergency stop - 400V

Kondisi: bekas, Tahun pembuatan: 2021, nomor mesin/kendaraan: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600 mm d) Open height 700 mm e) Overall dimensions approx. LxWxH 4500x2300x3700 mm f) Oil temperature display on the tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots as per customer specification, otherwise 22 mm i) Operation via swivel arm, mounted on the bridge j) Pressure adjustment from 50 T to 300 T via MONITOR k) Bridge traverses by two gear motors, via rack and pinion l) Cylinder traverses left and right via rack and pinion m) Machine body double painted n) Cylinder induction-hardened Design Type of press: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 sides Forces Ijdpfsh Agnuox Aa Nsal Max. pressing force: 3,000 kN Max. free peeling force: 500 kN Pressure build-up time closed tool steel on steel: Max. 3 sec Dimensions Max. opening 700 mm Stroke and min. opening: 700 mm/0 mm Table height above floor approx. 980 mm Height above floor (overall height) approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at max. closing force with 70% occupancy

Kondisi: baru, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 365 kg Isdpfxefk Aivj Aa Nsal This allows the user to flexibly adjust the height of the work surface to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is performed as standard by means of a manual hydraulic system in the range of 650 – 1050 mm (higher or lower ranges available upon request). The worktop features a 100 x 100 mm Ø 28 hole grid, just like the SST fix series. When used in combination with processing machines, test or rework fixtures (deburring, marking, inspection) can be adapted to the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with their various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die casting tools. Immediately after removal from the machine, the tools can be safely serviced on site and transferred to maintenance for repair. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer prior to order!