Presse für Montage und Demontage

Hidrobrasil 25 Tonnen Montagepresse

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Cpsdpfxofxyhfs Aa Tow Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Tahun pembuatan: 2026, Prod-Masz provides you with a brand-new, fully functional machine that has been tested under operational conditions. It meets the requirements of applicable standards regarding design and operational safety. - The extension table facilitates the handling of large-format sheet metal panels on the table - Support table with measurement scale - Robust and compact steel construction - High-quality, durable steel blades - Extremely stable and heavy cast-iron construction - Ground and hardened guillotine shear blades - Rear gauge system with scale - CE-certified quality - Declaration of conformity - Suitable for steel sheets up to 1.2 mm - Open design suitable for continuous cutting - Maximum working width: 3000 mm - Motor power: 2.2 kW - Oil type: HL 46 - Pressing force: 4 t - Operating pressure: 120-150 bar - Equipped with hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Cedpfxeda I Ihj Aa Tspw Height: 1150 mm Weight: approx. 1000 kg Shipping costs: 500 Euros We look forward to your enquiry!

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (L/W/H): 3200x2300x1350 mm Weight: 3,780 kg Standard equipment: - EZM9910 control unit - Backgauge range of 750 mm, programmable via control unit - Plastic inserts for hold-downs - 1 side stop and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Ball screw spindle - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Cpedpfx Aaod R Er Do Tew Optional equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Further machines are available for demonstration at our facility in Staufenberg. Further information available on request.

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm Cpsdpfx Aaelgvkio Tjw - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: sangat baik (bekas), Perfekt erhaltener sechsspindliger INDEX MS 25 Mehrspindel-Drehautomat mit jeweils sechs Quer- und Längsführungen für Werkzeuge. Der Preis ist verhandelbar und richtet sich nach dem gewählten Zusatzequipment: Spannzangen, Werkzeuge, Späneförderer usw. Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich. Cedoqhkukspfx Aa Tepw

Kondisi: baru, Ostas 3-Roller Plate Bending Machine ORM 1070 x 110 Technical Specifications: Special features included in the price: - Hardened rollers - Motorized rear roller adjustment - Digital display Sheet width: 1070 mm Sheet thickness max.: 5.0 mm Sheet thickness for pre-bending: 4.0 mm Roller length: 1070 mm Roller diameter: 110 mm Weight: 1000 kg Dimensions (L x W x H): 2250 x 800 x 1100 mm Motor: 2.2 kW Equipment: - Electrically driven top and bottom rollers - Swing-out top roller - Cone bending device - Asymmetrical roller arrangement Cjdpfjgkwhaex Aa Tspw - Self-braking main motor - Separate control and operator panel - Safety wire - CE mark

Kondisi: baru, Setara dengan Behringer, Kaltenbach, Kasto, Jaespa, dll. Area pemotongan 90° bulat 260 mm datar 300x260 mm diameter terkecil 5 mm Csdjh Tnd Aopfx Aa Topw Pemasukan material otomatis yang dikendalikan NC dengan penguncian material penuh hidraulik Pengoperasian mudah melalui kontrol NC dengan tampilan teks jelas Fungsi penyetelan material tanpa penjepitan ulang untuk potongan pendek Penjepit dorong material yang stabil dengan panduan linear dan posisi servo untuk akurasi tinggi Penyesuaian otomatis panduan pita sesuai lebar material Opsi yang direkomendasikan: sikat serpihan bermotor, disinkronkan dengan kecepatan pita panel kontrol terpisah Panel CE 7", dapat tersambung ke jaringan, penyimpanan hingga 1000 data, penyimpanan histori untuk berbagai fungsi dan data, dll.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1975, -KOM 1002- Offered here is a press by HYDRAP, model HKPS8000. Technical data: Cpodpfx Aajg Ufvbj Tsw Model: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (center) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: Hydraulic Drive power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E With your purchase, you will receive a proper invoice with VAT shown separately. We have many more interesting items for sale. Feel free to check out all our listings. If you are interested or have any questions, please contact us via the messaging function!

Kondisi: baru, - Capacity: 1070 x 2 mm - Conical rolling possible - Removable top roll - Foot pedal control - Emergency stop - Documentation Cpsdpshc Uvmofx Aa Tew - 400V

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system Cpedpfx Ajd Iipxea Tew