Tekan hidrolik

Hidrobrasil 4 Säulenpresse 250T

Pressure: 250 t
Passage width: 2500 mm
Stroke: 500 mm
Total power requirement: 60 kW
Approx. machine weight: 39 t
Dimensions (L x W x H): 2720 x 3750 x 4350 mm
Retracting force: 25 t
Max. working height: 800 mm
Table size: 3090 x 1500 mm
Ram size: 3090 x 1500 mm
Table height above floor approx.: 1000 mm
Approach speed: 400 mm/sec
Pressing speed (at 125 t): 50 mm/sec
Return speed: 400 mm/sec
Rapid traverse speed: 400 mm/sec
Oil tank: 1500 l
Oil cooling (electric): 3 kW (max)
Vibration damping plates: each 450x450x85 mm
Pressure: 250 t at 220 bar t/bar
Max. pump capacity: 176 l/min
Recommended oil: 46 / 10 μm
Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac
Gsdjd Nq Idopfx Adqsuh
Control SIEMENS: included
Safety light curtains from Schmersal/Pilz: Pilz
Monitor: Omron 12 inch

Vibration damping plates:

The machine rests on four specially manufactured vibration damping plates, each measuring 450x450x85 mm.

Oil tank with oil cooling:

The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which activates at 40°C.

Oil filtering system:

Independent of the main and cooling pump, the press features a separate filtration circuit. The pump operates continuously, requiring only 1.5 kW.

Energy-saving function:

If the main pump is not required for a preset period, it enters energy-saving mode, consuming only about 2 kW/h, yet it is immediately fully operational when pressure is needed again.

Safety technology:

The safety technology is provided by Pilz, with the light curtains from the same manufacturer.

Control cabinet:

40% of the control cabinet space is intentionally left free for future installations. All components installed are from Schneider.

Bolts:

All bolts used on the machine are zinc-plated or yellow-passivated.

Oil pan:

The hydraulic block and pump are housed in a small oil drip tray, allowing oil to be collected during repairs or hose replacements.

Noise emission:

According to standards, the press produces a maximum of 75 decibels.

Accessories:

Roller loading bridges:

Two removable loading bridges with rollers, each 1500 mm long, with supports fitted with large, robust heavy-duty rollers.

Parallelism monitoring:

Both cylinders are monitored for parallelism via Balluff displacement measuring systems and Sick wire-actuated encoders. The parallelism monitoring is activated at the start of the pressing process, and accuracy can be set in the control panel. The function is deactivated during empty runs. The position of the ram is measured on the left and right by two SICK cable-drum encoders. The control system then opens or closes the oil flow to the cylinders via special high-speed valves. The target parallelism accuracy is less than 1 mm across the entire width.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.