Tekan hidrolik

Hidrobrasil 400 Tonnen Viersäulenpresse

Hydraulic 400-ton Four-Column Press

Suitable for continuous multi-shift operation, with the following main features:

a) Closing speed: 100 - 450 mm/sec

b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen)

c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen)

d) Piston accumulator with approx. 4 nitrogen cylinders

e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns)

f) Total table size: 3400 x 1700 mm

g) 28 mm T-slots as per customer requirements

h) Table, ram, and press head stress-relieved annealed

i) Column diameter: 250 mm

j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm)

k) Machine overall size approx. 3900 x 2200 (footprint) x 5700 mm (height)

l) Oil temperature monitoring (adjustable via touchscreen)

m) Automatic lubrication (adjustable via touchscreen)

n) Free positioning of the ram (adjustable via touchscreen)

o) KEYENCE safety light curtains 14 mm front and rear

p) Circulation oil cooling (adjustable via touchscreen)

q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen)

r) Table plate size 3400 x 1700 mm, precision milled

s) Side doors with monitoring, 1200 mm high, 1000 mm wide
Godpfx Aeg Iihwodtstt

t) RITTAL control cabinet, 2200 mm wide, can be positioned up to 20 m from the press

u) Pressure settings from 50 tons to 400 tons (adjustable via touchscreen)

v) Stroke limit selectable via pressure or position

w) Modes: program operation, setup mode, single stroke + continuous stroke (selectable via rotary switch)

x) Swivelling operator panel with 15-inch touchscreen monitor

y) Two-hand operation on both sides

z) Prepared for automatic material feed (SIEMENS S7 1500)

aa) Machine body primed and painted

bb) Assembly, commissioning and instruction available at extra charge

Hydraulics: All press hydraulics are assembled exclusively with BOSCH-REXROTH / Parker / HAWE components. The control cabinet contains only components (SIEMENS) that are readily available in Germany. All safety devices apart from the light curtains are SICK brand. The controller supplied is SIEMENS (S7 1500), including the 15-inch touchscreen panel. The SIEMENS remote maintenance unit SECOME - Ethernet is included in the scope of delivery.

SPECIAL FEATURE: Our double-ram design in combination with a piston accumulator allows full performance to be delivered using a single 90 kW main motor.

Further technical details (section 1.3):

Technical Data

Design
Press type: Four-column press

Thermally neutral: 80 – 120 °C
Number of operator sides: 2

Forces

Pressing force max.: 4,000 kN
Free opening force max.: 600 kN
Pressure build-up time, tool closed (steel on steel): max. 2 sec.

Dimensions
Planned minimum tool height: 600 mm
Max. opening: 1,600 mm
Stroke and min. opening: 1,000/600 mm
Table height above floor: 820 mm
Overall height (build height): approx. 5,700 mm
Minimum hall height: 7,000 mm

Parallelism deviation
at 20°C: +/- 0.1 mm

Deflection
Measured at max. closing force, 70% table occupancy: ≤ 0.17 mm/m

Weight
Total weight of the press without operating fluids: approx. 52 t

Speeds (see attached cycle diagram)
Rapid closing: 100 – 450 mm/s
Pressing speed at max. force ...

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.