Demonstrasi Quadro planer PM180 dengan 5 spindel

Holzprofi 4-PM180-5

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm Gjdpfx Aaohlp D No Dsud - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: baru, Tahun pembuatan: 2023, CGM e41 generator set Continuous output (three-phase): 41.0 kVA / 32.8 kW Maximum output (three-phase): 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volts Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA – Approved for stationary use only Cooling system: Water-cooled Fuel: Diesel Cylinders: 4 Displacement: 3319 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Fuel consumption at 3/4 load (L/h): 8.5 Generator: MECC ALTE Type: Brushless AVR regulation Digital control unit: ComAp AMF Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Dry weight: 880 kg Fuel tank capacity: 200 l Gusdsq A U Aiepfx Aa Dsd Features: Oil drip tray Coolant pre-heating Battery trickle charger 3-way valve Soundproof enclosure: RAL 5015 Sky Blue Base frame: Black

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), 4-sided planer Weinig, 7-head, universal, head arrangement: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and the last one universal. Drive is provided via cardan shafts. The drive is protected with Rotax couplings. Workpiece feed is pneumatic. Feed speed is smoothly adjustable by frequency inverter. Machine feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table newly ground and new. Additionally, new cabling and new electrics. Machine after complete overhaul. Warranty included. Guodpopqxnxofx Aa Dsd

Kondisi: baru, MESIN UNTUK DITERANGKAN/DIPAMERKAN Dijual sebuah mesin gergaji pita balok yang kondisinya seperti baru, dengan panjang pemotongan 3.700 mm. Mesin pameran ini dalam kondisi aslinya, sehingga Anda mendapatkan garansi penuh. - Diameter batang maksimum 550 mm - Lebar papan maksimum 530 mm - Panjang pemotongan maksimum 3.700 mm (3,7 meter), dapat diperpanjang! - Panjang pemotongan minimum 900 mm (0,9 meter) - Langkah pita gergaji minimum/maksimum = 20/540 mm - Kedalaman pemotongan maksimum 220 mm - Diameter/lebar roda = 400/25 mm - Daya motor 5,5 kW (4,0 kW S1/100%) - Daya motor untuk penyesuaian ketinggian 0,12 kW - Panjang pita gergaji 3.200 mm Gujdpfx Aevy Ufvoa Dod - Kecepatan pita gergaji 15 m/s - Panjang keseluruhan versi dasar 4.600 mm (4,6 meter) - Berat sekitar 350 kg Mesin ini berada di A-5431 Kuchl dan dapat diperiksa kapan saja selama jam buka kami. Penjualan dapat dilakukan sewaktu-waktu! Istilah terkait: Pabrik gergaji pita, gergaji pita balok, gergaji pita, mesin Referensi: R-A0117

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Gedpfx Aaewgwmno Doud Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Kondisi: baru, Typ MB504B Gjdsd Srrdjpfx Aa Doud Arbeitsbreite: 400 mm Gesamtlänge: 2200 mm Abmessungen des Anschlags: 870 x 100 mm Anschlag schwenkbar: 45° Anzahl der Messer: 3 Spindeldrehzahl: Motorleistung: 4 kW

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), Four-side Planer, 5-Head, TOS Svitava Lignum Guedpfx Aasndcg Nj Dsd Five-head four-side planer, 240 mm working width, with grooved table, completely overhauled FWH 225 mm, total power 23 kW

Kondisi: bekas, jarak tempuh: 136.334 km, daya: 63 kW (85,66 hp), pendaftaran pertama: 03/1983, jenis bahan bakar: diesel, berat kosong: 4.830 kg, berat muatan maksimum: 1.670 kg, berat keseluruhan: 6.500 kg, konfigurasi gandar: 4x2, jarak roda: 3.100 mm, rem: lain, kabin pengemudi: lain, tipe perpindahan gigi: mekanis, kelas emisi: tidak ada, jumlah tempat duduk: 3, Perlengkapan: pelindung kepala,

Kondisi: bekas, jarak tempuh: 102.327 km, daya: 154 kW (209,38 hp), pendaftaran pertama: 02/1985, berat keseluruhan: 14.000 kg, konfigurasi gandar: 2 gandar, warna: merah, tipe perpindahan gigi: mekanis,

Kondisi: baru, Bernardo segmented folding machine with segmented upper and lower beam TBS 1270 Working length: 1270 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width: 46 mm Bending angle: 0 – 135° Width: 1600 mm Depth*: 1115 mm Height: 1150 mm Weight: approx. 360 kg * with back gauge Features - Segmented upper and bending beam for a wide range of bending applications - Clamping by foot pedal allows hands-free positioning of the sheet - Versatile bending machine for sheet metal shops and repair workshops - Robust construction with modern design - Manual bending machine for standard bending tasks - Excellent price-performance ratio - Quick and easy bending process using bow handle - Easy adjustment of the lower beam to match sheet thickness - High upper beam for producing profiles with large flange heights Scope of delivery - Segmented upper beam - Segmented lower beam Guodped Hxmysfx Aa Dod - Back gauge - Bending segments: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm