Mesin demonstrasi briket press BP-70F Holzprofi

Holzprofi BP-70F

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Dkjdot Hagnopfx Adgog Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: baik (bekas), Tahun pembuatan: 1999, Briket Press Tipe GP 120 Tandem Mesin press briket untuk briket serbuk, serpihan, dan debu termasuk sensor level otomatis - Diameter briket: 60 mm - Kapasitas tekan: 40 - 120 kg/jam * 2 = 80 - 240 kg/jam (tergantung material) - Buka hopper: sekitar 1.900 x 1.900 mm - Tinggi hopper: sekitar 1.800 mm Dkedpfx Adjupwx Hjgjg - Kapasitas hopper: sekitar 6,0 m³ - Daya motor: 7,5 kW, 400 V, 50 Hz - Panel kontrol: tersedia di kedua sisi - Jam operasional: 13.725 jam atau 13.005 jam - Unit hidrolik: tangki sekitar 300 l untuk oli hidrolik - Berat: sekitar 1.100 kg * 2 = 2.200 kg Briket press bekas dalam kondisi baik Silinder penjepit model W, penjepit (RB 120 diperkuat), flensa sambungan penjepit telah diganti di satu sisi (kiri dalam arah konveyor) pembakaran briket | mesin briket | press briket | mesin press briket | briketisasi

Tahun pembuatan: 2007, Kondisi: bekas, en-GB Dksdpfsppucasx Adgeg

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, wood fibreboards and scrap pieces, veneers, MDF boards, plastics, etc.) ✔ Motor power: 22 kW ✔ Rotor length: 650 mm ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80–120 rpm ✔ Number of cutting blades: 2x14 ✔ Granulation: 10–50 mm ✔ Capacity: up to 5 m³/h* ✔ Extraction connection: 160 mm ✔ Feed opening: 1446 x 1342 mm ✔ Dimensions (L/W/H): 1.92 / 1.55 / 1.79 m ✔ Weight: 1,750 kg Dkodshwwpzspfx Adgsg 2 years warranty or 2,000 operating hours

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, Costa calibration machine Dsdpfswmxh Tox Adgskg

Kondisi: baru, Wood Briquetting Press Amis ABP 60 L -Exhibition Machine- ----- Technical Data ----- Briquette Ø: 60 mm Hydraulic Unit: 3 kW, 140 bar Voltage: 400 V Frequency: 50 Hz Circuit Protection: 16 A Output approx.: 20–35 kg/h Weight approx.: 300 kg - Extremely simple operation - Hydraulic control system - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complicated controls - Large feed hopper - Hardened briquette tongs - Replaceable pressing rod - Pressing without the need for additives - Thanks to the pre-compressor, even voluminous shavings can be processed - No adjustments or monitoring of pressure required Dksdpfx Adeu R Sxxjgeg - new exhibition machine -

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.300 mm, tinggi penggerindaan: 160 mm, jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 2.150 mm, Heesemann JSM 1350 RC Surface Sanding Machine Year of manufacture: 2025, brand new machine, currently the only exhibition machine available in Europe! - Electronic height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units equipped with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - Industrial PC 15.6" - Program memory for 100 programs - Remote service - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Dkjdpswcqr Ajfx Adgog Front calibration roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table pre-configured (drilled) for vacuum blower connection - Vacuum blower (integrated in machine) - Workpiece cleaning with oscillating air nozzle - CSD (Magnetic pressure beam) The machine is connected and can be inspected on site by appointment. Please do not hesitate to contact us if you have any questions.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The rugged Junior R1 offers all the features required of a modern edge sanding machine. A solid cast iron sanding unit equipped with a powerful motor ensures maximum sanding performance. The height-adjustable worktable, adjusted by spring pressure, allows for optimal use of the sanding belt and ensures safe operation. Optional upgrades include belt oscillation, stepless tilting of the sanding unit, a veneer sanding device, and an auxiliary table for sanding operations on the idler roller. The machine is delivered with an assortment of sanding belts; also included in the scope of delivery are an angle and mitre guide. Technical Data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec. • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg Dksdpfx Aded R Ev Dogeg • Extraction diameter: 100 mm Location: Available from stock, 54634 Bitburg – free loaded – Shipping possible for a fee.

Kondisi: baik (bekas), Analog with electric scanner. Dksdjdy Eynjpfx Adgjg - Includes several options. Surface length: approx. 990 mm Max. optical glass table height (removable): approx. 200 mm (Device only, without table) Dimensions: L / W / H 110 x 115 x 80 cm Weight approx. 400 kg

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Djdpfxou Nlkxs Adgokg